Ürün Açıklaması

Interference filter for I/O modules of the XC100/200
For suppressing interference of the supply of the I/O modules of the XC100/200. Maximum current consumption 12A.

Accessories	Filtering:
Description	Power supply interference suppression of I/O modules of XC100/200
Max. current consumption	12 A
Standards
Ambient temperature	IEC/EN 61131-2 EN 50178
Storage [ϑ]	0 - +55 °C
Mounting position	-25 - +70 °C
Vibration resistance	Vertical or horizontal
Mechanical shock resistance	10 - 57 Hz ± 0.075 mm 57 - 150 Hz ± 1.0 g
Impact resistance	15 Shock duration 11 ms g
Overvoltage category/pollution degree	500 g/⌀ 50 mm ±25 g
Degree of Protection	II/2
Rated impulse withstand voltage [Uimp]	IP20
Emitted interference	850 V
Interference immunity	DIN/EN 55011/22, Class A
Weight	EN 50082-2
Dimensions (W x H x D)	0.095 kg
Terminations	35 x 90 x 57 mm
Terminal capacities >Screw terminals >Flexible with ferrule	Screw terminals
Terminal capacities >Screw terminals >Solid	0.2 - 2.5 (AWG22 - 12) mm2
Input voltage	0.2 - 2.5 (AWG22 - 12) mm2
Admissible range
Residual ripple	24 V DC
Mains overvoltage protection	20.4 - 28.8 V DC
Potential isolation >Input voltage against PE	≦ 5 %
Potential isolation >Input voltage agaisnt output voltage	yes
Potential isolation >Output voltage against PE	Yes
Rated value	No
Output current	yes
Rated operational current for specified heat dissipation [In]	24 V DC
Heat dissipation per pole, current-dependent [Pvid]	12 A
Equipment heat dissipation, current-dependent [Pvid]
Static heat dissipation, non-current-dependent [Pvs]	0 A
Heat dissipation capacity [Pdiss]	0 W
Operating ambient temperature min.	0 W
Operating ambient temperature max.	0 W
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	0 W
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	0 °C
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	+55 °C
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Does not apply, since the entire switchgear needs to be evaluated.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	Is the panel builder´s responsibility.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Is the panel builder´s responsibility.
Type of electrical accessory	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Type of mechanical accessory	Is the panel builder´s responsibility.