SKU: Eaton-115966
LED element, for combination with RMQ-Titan operating elements M22-..., Front fixing, white
LED element, Fixing: Front fixing, Colour: white, Connection to SmartWire-DT: yes
| Basic function accessories | LED elements |
| Function | for combination with RMQ-Titan operating elements M22-... |
| Fixing | Front fixing |
| Configuration | |
| Connection to SmartWire-DT | white |
| Standards | |
| Approvals >shipping classification |
yes |
| Dimensions (W x H x D) | IEC/EN 61131-2 EN 50178 |
| Weight | DNV GL BV LRS |
| Mounting position | 10 x 42 x 45 mm |
| Protection type (IEC/EN 60529, EN50178, VBG 4) | 10 g |
| Vibrations (IEC/EN 61131-2:2008) >Constant amplitude 3,5 mm |
As required |
| Vibrations (IEC/EN 61131-2:2008) >Constant acceleration 1 g |
IP20 |
| Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms | 5 - 8.4 Hz |
| Drop to IEC/EN 60068-2-31 [Drop height] | 8.4 - 150 Hz |
| Free fall, packaged (IEC/EN 60068-2-32) | 9 Impacts |
| Overvoltage category | 50 mm |
| Pollution degree | 0.3 m |
| Electrostatic discharge (IEC/EN 61131-2:2008) >Air discharge (Level 3) |
Not applicable |
| Electrostatic discharge (IEC/EN 61131-2:2008) >Contact discharge (Level 2) |
2 |
| Electromagnetic fields (IEC/EN 61131-2:2008) >80 - 1000 MHz |
8 kV |
| Electromagnetic fields (IEC/EN 61131-2:2008) >1.4 - 2 GHz |
4 kV |
| Electromagnetic fields (IEC/EN 61131-2:2008) >2 - 2.7 GHz |
10 V/m |
| Radio interference suppression (SmartWire-DT) | 3 V/m |
| Burst (IEC/EN 61131-2:2008, Level 3) >Supply cable |
1 V/m |
| Burst (IEC/EN 61131-2:2008, Level 3) >SmartWire-DT cable |
EN 55011 Class A |
| Radiated RFI (IEC/EN 61131-2:2008, Level 3) | 2 kV |
| Ambient temperature >Operating ambient temperature (IEC 60068-2) |
1 kV |
| Ambient temperature >Storage |
10 V |
| Relative humidity >Condensation |
-30 - +70 °C |
| Relative humidity >Relative humidity, non-condensing (IEC/EN 60068-2-30) |
- 40 - + 80 °C |
| Station type | Take appropriate measures to prevent condensation |
| Status indication | 9 - 95 % |
| Connections | SmartWire-DT slave |
| Plug connectors | Green LED |
| Switching state display | Plug, 8-pole |
| Diagnostics | SWD4-8SF2-5 |
| Fixing | Yes LED |
| Rated operational current for specified heat dissipation [In] | No |
| Heat dissipation per pole, current-dependent [Pvid] | Front fixing |
| Equipment heat dissipation, current-dependent [Pvid] | 0 A |
| Static heat dissipation, non-current-dependent [Pvs] | 0 W |
| Heat dissipation capacity [Pdiss] | 0 W |
| Operating ambient temperature min. | 0.3 W |
| Operating ambient temperature max. | 0 W |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
-30 °C |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
+70 °C |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.3 Degree of protection of ASSEMBLIES | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
| 10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.8 Connections for external conductors | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
| 10.10 Temperature rise | Is the panel builder´s responsibility. |
| 10.11 Short-circuit rating | Is the panel builder´s responsibility. |
| 10.12 Electromagnetic compatibility | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Transformer integrated | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| With integrated voltage decreasing resistor | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| With light source | No |
| With integrated diode | No |
| Lamp holder | Yes |
| Rated voltage Ue at AC 50 Hz | No |
| Rated voltage Ue at AC 60 Hz | None |
| Rated voltage Ue at DC | 0 - 0 V |
| Voltage type for actuating | 0 - 0 V |
| Lamp type | 30 - 30 V |
| Connection type auxiliary circuit | DC |
| Colour lamp | LED |
| Type of fastening | Flat plug-in connection |
| UL File No. | White |
| UL Category Control No. | Front fastening |
| CSA File No. | E29184 |
| CSA Class No. | NKCR |
| North America Certification | 2324643 |
| Specially designed for North America | 3211-07 |
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024