Ürün Açıklaması

Safety relay, 24 V DC, 14DI, 4DO relays, easyNet
Extendable control relay suitable for safety circuits, rated operating voltage 24VDC, 14 safety digital inputs, 1 safe and redundant relay output 6A, 4 transistor outputs 0.5A, 4 test signal outputs, suitable for cat. 4 according to EN 954-1 / PL e according to EN ISO 13849-1 / SILCL3 according to IEC 62061 / SIL3 according to IEC61508, degree of protection IP20, no keypad, no LCD display, safety and standard functionality integrated into a device, bus system easyNet on board, easyLink, expandable with digital inputs and outputs, expandable to the bus systems AS-Interface, PROFIBUS-DP, integrated, deviceNet, custom labeling of control relay with inscription software Labeleditor

Product range	Control relays for safety applications
Basic function	easy800 with safety function blocks
Safety functions
Display & keypad	Stopping in the event of an emergency Protective door OSSD input ESPE with muting function Two-hand control Highest speed monitoring Zero speed monitoring Safety timing relay Mode selection Enabling switch Feedback circuit
Mounting width	-
Technical safety parameters: >Values according to EN ISO 13849-1 >Performance level [according to EN ISO 13849-1]	107.5 mm
Technical safety parameters: >Values according to EN ISO 13849-1 >Category [according to EN ISO 13849-1]	PL e
Safety integrity level claim limit [in accordance with 62061]	Kat. 4
Probability of failure per hour [PFHd]	SILCL 3
Safety integrity level [In accordance with IEC 61508]	4.26 x 10-10
Real time clock	SIL 3
Supply voltage [Us]	✔
Networking	24 V DC
Safety/standard circuit diagram	easyNet/easyLink
Instructions	✓/✓
Inputs (safety)	Expandable: standard inputs/outputs and standard bus systems
6 A relay	individual laser inscription with ES4-COMBINATION possible ￫#2011790
Test signal	14
Standards
Approvals >Approvals	4
Dimensions (W x H x D)	4
Weight
Mounting	EN ISO 13849-1 EN 50156-1, EN 50156-2 EN 50178 EN 50581_x EN 61000-6-2 EN 61000-6-3 IEC 61508 IEC 62061
Inputs >Max. duration of external test pulde	EAC
Semi-conductor output >Off test pulse	107.5 (6 TE) x 90 x 72 mm
Semi-conductor output >Off-delay	0.38 kg
Solid	Top-hat rail IEC/EN 60715, 35 mm or screw fixing using fixing brackets ZB4-101-GF1 (accessories)
Flexible with ferrule
Standard screwdriver	1 ms
Max. tightening torque	< 1 ms
Operating ambient temperature	< 1 ms
Condensation
Ambient temperature >Storage [ϑ]	0.2/4 (AWG 22 - 12) mm2
relative humidity	0.2/2.5 (AWG 22 - 12) mm2
Air pressure (operation)	0.8 x 3.5 mm
Degree of protection	0.6 Nm
Constant amplitude 0.15 mm >constant amplitude
Constant amplitude 0.15 mm >constant acceleration	-25 to + 55 cold as per IEC 60068-2-1 heat as per IEC 60068-2-2 Damp heat – constant to IEC 60068-2-78 – cyclical to ICE 60068-2-30 °C
Vibrations [3,5 mm / 1 g]	Take appropriate measures to prevent condensation
Mechanical shock resistance	-40 - +70 °C
Drop to [Drop height]	5 - 95 in accordance with IEC 60068-2-30, IEC 60068-2-78 Non-condensing %
Free fall, packaged	795 - 1080 hPa
Electromagnetic compatibility
Overvoltage category/pollution degree	IP20 (IEC/EN 60529, EN50178, VBG 4)
Electrostatic discharge (ESD) >applied standard	10 - 57 (0.15 mm) Hz
Electrostatic discharge (ESD) >Air discharge	57 - 150 (2g) Hz
Electrostatic discharge (ESD) >Contact discharge	In accordance with IEC 60068-2-6 Hz
Electromagnetic fields (RFI)	18 shocks Sinusoidal 15 g/11 ms according to IEC 60068-2-27 g
Radio interference suppression	50 (IEC/EN 60068-2-31) mm
Burst	0,3 (IEC/EN 61131-2) m
power pulses (Surge)
Immunity to line-conducted interference	As per ICE 62061, increased EMC requirements for safety-relevant functions
Clearance in air and creepage distances	III/2
Insulation resistance	according to IEC EN 61000-4-2
Back-up of real-time clock	15 kV
Accuracy of the real-time clock	8 kV
Resolution >Range “S”	30 to IEC EN 61000-4-3 V/m
Resolution >Range “M:S”	EN 55011 Class B, EN 55022 Class B
Resolution >Range “H:M”	according to IEC/EN 61000-4-4 Supply cables: 4 Signal cables: 4 kV
Resolution >Range “S”	2 kV (supply cables, symmetrical) 4 kV (semi-conductor outputs, symmetrical) In accordance with IEC 62061
Resolution >Range “M:S”	20, in accordsnce with IEC/EN 61000-4-6 V
Resolution >Range “H:M”
Read/write cycles (minimum)	EN 50178, UL 508, CSA C22.2, No. 142, EN 60664-1:2003
Rated operational voltage [Ue]	EN 50178
Permissible range [Ue]
Residual ripple
Input current >Input current 115/230 V AC	① Backup time (hours) with fully charged double layer capacitor ② Service life (years)
Voltage dips	Normally ±2 (±0.5 h/year), may vary up to ±5 s/day depending on the ambient temperature s/day
Heat dissipation
Potential isolation	50 ms
Stations	1 s
Data transfer rate/distance	1 min
Potential isolation >Potential isolation between inputs and internal power supply
Potential isolation	50 ms
Bus termination	1 s
Connection technique	1 min
Number
Potential isolation	100000000000000 (1014)
Rated signal voltage [Ue]
On 0 signal [Ue]	24 DC (-15/+20%) V
On 1 signal [Ue]	20.4 - 28.8 V DC
Input current on 1 signal >IS1 - IS14	≦ 0 %
Hardware delay time from 0 to 1	< 250 mA
Hardware delay time from 1 to 0	≤ 10 (IEC/EN 61131-2) ms
Cable length (unscreened)	< 6 W
Single cable length of test signal output to the device input (shielded)	From the inputs: yes: no from the outputs: yes to PC interface: no to easyLink:no to easyNet: yes
Total of single cable lengths from one test signal output to the device inputs (shielded)
Maximum rotary frequency at device inputs IS1 and IS2, when using function block OM or ZM	max. 8 Number
Maximum switching frequency at input (does not apply to I1, I2, if function block SM or OM is used)	1000 kBit/s, 6 m 500 kBit/s, 25 m 250 kBit/s, 40 m 125 kBit/s, 125 m 50 kBit/s, 300 m 20 kBit/s, 700 m 10 kBit/s, 1000 m
Number	yes
Voltage	from power supply: yes From the inputs: yes from the outputs: yes to PC interface: yes to memory card: yes to easyLink: no to easyNet: yes
Potential isolation	yes (first and last station)
Outputs in groups of	RJ45, 8-pole
Safety level
Protection of an output relay	14
Potential isolation	from power supply: no between digital inputs: no from the outputs: yes to the interface: no to the memory card: no to easyLink: no to easyNet: yes
Lifespan, mechanical [Operations]	24 V DC
Contacts >Conventional thermal current [Ith ]	< 5 V DC
Contacts >Rated impulse withstand voltage Uimp of contact coil	> 15,0 V DC
Contacts >Rated operational voltage [Ue]	5.7 (at 24 V DC) mA
Rated insulation voltage [Ui]	Debounce ON: 24 Debounce OFF: 0.06 (IS1, IS2), 0.17 (IS3 to IS14)
safe isolation between coil and contact	Debounce ON: 24 Debounce OFF: 0.08 (IS1, IS2), 0.22 (IS3 to IS14)
Switching capacity	100 m
Switching frequency >Mechanical operations	1000 m
Switching frequency >Switching frequency	3000 m
Residual ripple	1000 Hz
Rated operational current for specified heat dissipation [In]	900 Operations/h
Heat dissipation per pole, current-dependent [Pvid]
Equipment heat dissipation, current-dependent [Pvid]	4 (T1 to T4)
Static heat dissipation, non-current-dependent [Pvs]	24 V DC
Heat dissipation capacity [Pdiss]	No
Operating ambient temperature min.
Operating ambient temperature max.	4
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	1
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	3 redundant relay outputs, 6 months test interval According to EN 50156
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Fuse: 6 A gL/gG, Circuit-breaker with C characteristic: 4 A (only permissible with 24V DC), Short-circuit current IK < 250 A
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	from power supply: yes From the inputs: yes between digital inputs: yes to the interface: yes to easyNet: yes to easyLink: yes Safe isolation according to EN 50178: 300 V AC Basic isolation: 600 V AC
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	10 x 106
10.2 Strength of materials and parts >10.2.5 Lifting	6 A
10.2 Strength of materials and parts >10.2.6 Mechanical impact	6 kV
10.2 Strength of materials and parts >10.2.7 Inscriptions	250 V AC
10.3 Degree of protection of ASSEMBLIES	250 V AC
10.4 Clearances and creepage distances	300 in accordance with 50178 V AC
10.5 Protection against electric shock	DC-13, 24 V DC, 0.1 Hz: 40000 operations (in accordance with IEC 60947-5-1) AC-15, 230 V AC, 3 A: 80000 operations (in accordance with IEC 60947-5-1) DC: B300 (in accordance with UL 508) AC: R300 (in accordance with UL 508)
10.6 Incorporation of switching devices and components	10 x 106
10.7 Internal electrical circuits and connections	15 Hz
10.8 Connections for external conductors
10.9 Insulation properties >10.9.2 Power-frequency electric strength	5 %
10.9 Insulation properties >10.9.3 Impulse withstand voltage
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	0 A
10.10 Temperature rise	0 W
10.11 Short-circuit rating	0 W
10.12 Electromagnetic compatibility	6 W
10.13 Mechanical function	0 W
Supply voltage AC 50 Hz	-25 °C
Supply voltage AC 60 Hz	+55 °C
Supply voltage DC
Voltage type of supply voltage	Meets the product standard´s requirements.
Switching current	Meets the product standard´s requirements.
Number of analogue inputs	Meets the product standard´s requirements.
Number of analogue outputs	Meets the product standard´s requirements.
Number of digital inputs	Meets the product standard´s requirements.
Number of digital outputs	Does not apply, since the entire switchgear needs to be evaluated.
With relay output	Does not apply, since the entire switchgear needs to be evaluated.
Number of HW-interfaces industrial Ethernet	Meets the product standard´s requirements.
Number of interfaces PROFINET	Does not apply, since the entire switchgear needs to be evaluated.
Number of HW-interfaces RS-232	Meets the product standard´s requirements.
Number of HW-interfaces RS-422	Does not apply, since the entire switchgear needs to be evaluated.
Number of HW-interfaces RS-485	Does not apply, since the entire switchgear needs to be evaluated.
Number of HW-interfaces serial TTY	Is the panel builder´s responsibility.
Number of HW-interfaces USB	Is the panel builder´s responsibility.
Number of HW-interfaces parallel	Is the panel builder´s responsibility.
Number of HW-interfaces Wireless	Is the panel builder´s responsibility.
Number of HW-interfaces other	Is the panel builder´s responsibility.
With optical interface	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Supporting protocol for TCP/IP	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Supporting protocol for PROFIBUS	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Supporting protocol for CAN	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Supporting protocol for INTERBUS
Supporting protocol for ASI
Supporting protocol for KNX	0 - 0 V
Supporting protocol for MODBUS	0 - 0 V
Supporting protocol for Data-Highway	20.4 - 28.8 V
Supporting protocol for DeviceNet	DC
Supporting protocol for SUCONET	8 A
Supporting protocol for LON	0
Supporting protocol for PROFINET IO	4
Supporting protocol for PROFINET CBA	14
Supporting protocol for SERCOS	4
Supporting protocol for Foundation Fieldbus	Yes
Supporting protocol for EtherNet/IP	0
Supporting protocol for AS-Interface Safety at Work	0
Supporting protocol for DeviceNet Safety	1
Supporting protocol for INTERBUS-Safety	0
Supporting protocol for PROFIsafe	0
Supporting protocol for SafetyBUS p	0
Supporting protocol for other bus systems	0
Radio standard Bluetooth	0
Radio standard WLAN 802.11	0
Radio standard GPRS	3
Radio standard GSM	No
Radio standard UMTS	No
IO link master	No
Redundancy	No
With display	No
Degree of protection (IP)	No
Basic device	No
Expandable	No
Expansion device	No
With timer	No
Rail mounting possible	No
Wall mounting/direct mounting	No
Front build in possible	No
Rack-assembly possible	No
Suitable for safety functions	No
Category according to EN 954-1	No
SIL according to IEC 61508	No
Performance level acc. EN ISO 13849-1	No
Appendant operation agent (Ex ia)	No
Appendant operation agent (Ex ib)	No
Explosion safety category for gas	No
Explosion safety category for dust	No
Width	Yes
Height	No
Depth	No
Product Standards	No
UL File No.	No
UL Category Control No.	No
CSA File No.	No
CSA Class No.	Yes
North America Certification	No
Degree of Protection	IP20