106393 EC4P-221-MRXD1

Compact PLC, 24 V DC, 12DI(of 4AI), 6DO(R), CAN, display
Compact controller for small and medium-sized automation tasks, programming according to IEC 61131 (CoDeSys), the Ethernet interface and the serial interface (ec4p-222 types) are for the purpose of programming, the communication via UDP and Modbus as well as connection of OPC clients

Ürün Açıklaması

Compact PLC, 24 V DC, 12DI(of 4AI), 6DO(R), CAN, display
Compact controller for small and medium-sized automation tasks, programming according to IEC 61131 (CoDeSys), the Ethernet interface and the serial interface (ec4p-222 types) are for the purpose of programming, the communication via UDP and Modbus as well as connection of OPC clients
Description Expandable: Inputs/outputs and bus systems
individual laser inscription possible with EC4-COMBINATION-*
Digital easyNet/CANopen® on board
of which can be used as analog
Relay 10 A (UL) 12
Display & keypad 4
Supply voltage
Dimensions (W x H x D) 6
Weight
Mounting
Solid 24 V DC
Flexible with ferrule
Standard screwdriver 107.5 x 90 x 72 without/79 with adapter for MCC (6 SU) mm
Max. tightening torque 0.3 kg
Operating ambient temperature Top-hat rail IEC/EN 60715, 35 mm or screw fixing using 3 fixing brackets ZB4-101-GF1 (accessories)
Condensation
LCD display (clearly legible) 0.2/4 (AWG 22 - 12) mm2
Storage [ϑ] 0.2/2.5 (AWG 22 - 12) mm2
Relative humidity, non-condensing (IEC/EN 60068-2-30) 0.8 x 3.5 mm
Air pressure (operation) 0.6 Nm
Protection type (IEC/EN 60529, EN50178, VBG 4)
Vibrations (IEC/EN 60068-2-6)
>Constant amplitude 0.15 mm
-25 to 55, cold as per IEC 60068-2-1, heat as per IEC 60068-2-2 °C
Vibrations (IEC/EN 60068-2-6)
>Constant acceleration 2 g
Take appropriate measures to prevent condensation
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms 0 - 55 °C
Drop to IEC/EN 60068-2-31 [Drop height] -40 - +70 °C
Free fall, packaged (IEC/EN 60068-2-32) 5 - 95 %
Mounting position 1080 - 1080 hPa
Overvoltage category/pollution degree
Electrostatic discharge (ESD)
>applied standard
IP20
Electrostatic discharge (ESD)
>Air discharge
10 - 57 Hz
Electrostatic discharge (ESD)
>Contact discharge
57 - 150 Hz
Electromagnetic fields (RFI) to IEC EN 61000-4-3 18 Impacts
Radio interference suppression 50 mm
Burst 1 m
Burst
>Supply cable
Vertical or horizontal
Burst
>Signal lines
power pulses (Surge) II/2
Immunity to line-conducted interference to (IEC/EN 61000-4-6) IEC EN 61000-4-2, Level 3
Clearance in air and creepage distances 8 kV
Insulation resistance 6 kV
Back-up of real-time clock 10 V/m
Accuracy of the real-time clock EN 55011 Class B, EN 55022 Class B
Write cycles of the retentive memory IEC/EN 61000-4-4, level 3 kV
Rated operational voltage [Ue] 2 kV
Permissible range [Ue] 2 kV
Residual ripple 2 kV (supply cables, symmetrical, EASY...AC)
0.5 kV (supply cables, symmetrical, easy-DC)
according to IEC/EN 61000-4-5
Input current 10 V
Voltage dips
Heat dissipation [P] EN 50178, UL 508, CSA C22.2, No. 142
Processor EN 50178
Memory
>Program code/data
Memory
>Marker/retentive data
252U067
Cycle time for 1 k of instructions (Bit, Byte) ① Backup time (hours) with fully charged double layer capacitor
② Service life (years)
PRG interface RS232
>Data transfer rate
part no. ± 5 (± 0.5 h⁄Year) s/day
PRG interface RS232
>Connection types
PRG interface RS232
>Potential isolation
10000000000 (10¹⁰) (Read-write cycles)
PRG interface RS232
>Master mode
>Data transfer rate
PRG interface RS232
>Master mode
>Character formats
24 DC (-15/+20%) V
PRG interface RS232
>Master mode
>Number of transmission bytes in a block
20.4 - 28.8 V DC
PRG interface RS232
>Master mode
>Number of received bytes in a block
≦ 5 %
Ethernet
>Data transfer rate
normally 140 mA at Ue
Ethernet
>Connection types
≤ 10
(IEC/EN 61131-2) ms
Ethernet
>Potential isolation
Normally 3.4 W
CANopen®
>Data transfer rate
CANopen®
>Bus termination (first and last station)
Infineon XC161
CANopen®
>Connection types
256/14 segments of 16 KB each kByte
Master mode
>Number
16/4/4/8 KByte
Mode slave
>Stations
< 0.3 ms
Mode slave
>PDO type
Mode slave
>Control contact rated current
4.8, 9.6, 19.2, 38.4, 57.6, 115.2 (character format: 8 bit data, no parity, 1 stop bit) kBit/s
Number RJ45-bus
Inputs can be used as analog inputs none
Status Display 0.3, 0.6, 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 57.6 kbit/s
Potential isolation 8E1, 8O1, 8N1, 8N2, 7E2, 7O2, 7N2, 7E1
Rated operational voltage [Ue] 190 bytes
Input voltage 190 bytes
Input current on 1 signal
>Input current at signal 1
10 MBit/s, 100 m Mbit/s
Deceleration time RJ45
Cable length No
Incremental counter
>Number of counter inputs
500 kBit/s, 25 m 250 kBit/s, 60m 125 kBit/s, 125 m 50 kBit/s, 300 m 20 kBit/s, 700 m 10 kBit/s, 1000 m
Incremental counter
>Value range
EASY-NT-R plug (incl. bus terminating resistor 120 Ω)
Incremental counter
>Counter frequency
2 x RJ45, 8 pole
Incremental counter
>Pulse shape
8
Incremental counter
>Counter inputs
max. 126 Number
Incremental counter
>Reference input
Asynchronous, cyclic, acyclic
Incremental counter
>Input for reference switch
To DS 301 V4
Incremental counter
>Counter inputs I1 and I2, I3 and I4
Incremental counter
>Signal offset
12
Rapid counter inputs
>Number
4 (I7, I8, I11, I12)
Rapid counter inputs
>Value range
LCD-Display
Rapid counter inputs
>Cable length
from the outputs: yes
to network easyNet, easyLink
Rapid counter inputs
>Counter frequency
24 V DC
Rapid counter inputs
>Pulse shape
< 5 (I1 - I6, I9 - I10) < 8 (I7, I8, I11, I12) at signal "0"
> 15.0 (I1 - I6, I9, I10) > 8.0 (I7, I8, I11, I12) at signal "1" V DC
Number 3.3 (I1 to I6)
2.2 (I7, I8)
3.3 (I9, I10)
2.2 (I11, I12) mA
Potential isolation normally 0.02 (I1 - I4), normally 0.25 (I5 - I12) (from ´´0´´ to "1")
normally 0.02 (I1 - I4), normally 0.25 (I5 - I12) (from ´´0´´ to "1") ms
Input type 100 (unshielded) m
Signal range 1 (I1, I2, I3, I4)
Resolution 32 Bit
Input impedance ≦ 40 kHz
Accuracy of actual value
>Within a single device
Square
Conversion time, analog/digital I1, I2
Input current I3
Cable length I4
Outputs in groups of 1
Parallel switching of outputs for increased output 90°
Protection of an output relay 2 (I1, I2) at 16 Bit or 1 (I1) at 32 Bit
Potential isolation 16/32 Bit
Lifespan, mechanical [Operations] ≦ 20 (screened) m
Contacts
>Conventional thermal current (10 A UL)
≦ 50 kHz
Contacts
>Recommended for load: 12 V AC/DC
Square
Contacts
>Short-circuit-proof cos ϕ = 1, characteristic B16 at 600 A
Contacts
>Short-circuit-proof cos ϕ = 0.5 to 0.7, characteristic B16 at 900 A
4 (I7, I8, I11, I12)
Contacts
>Rated impulse withstand voltage Uimp of contact coil
from the outputs: yes
to interface/memory card: no
Contacts
>Rated operational voltage [Ue]
DC voltage
Rated insulation voltage [Ui] 0-10 V DC
Safe isolation according to EN 50178 0.01 V analog
0.01 V digital
10 Bit (value 0 - 1023)
Making capacity
>AC–-15, 250 V AC, 3 A (600 ops./h) [Operations]
11.2 kΩ
Making capacity
>DC-13, L/R ≦ 150 ms, 24 V DC, 1 A (500 S/h) [Operations]
± 2, (I7, I8, I11, I12) ± 0.12 V %
Breaking capacity
>AC-15, 250 V AC, 3 A (600 Ops./h) [Operations]
each CPU cycle ms
Breaking capacity
>DC-13, L/R ≦ 150 ms, 24 V DC, 1 A (500 S/h) [Operations]
< 1 mA
Filament bulb load
>1000 W at 230/240 V AC [Operations]
≦ 30, screened m
Filament bulb load
>500 W at 115/120 V AC [Operations]
Fluorescent lamp load
>Fluorescent lamp load 10 x 58 W at 230/240 V AC
>With upstream electrical device [Operations]
1
Fluorescent lamp load
>Fluorescent lamp load 10 x 58 W at 230/240 V AC
>Uncompensated [Operations]
Not permissible
Fluorescent lamp load
>Fluorescent lamp load 1 x 58 W at 230/240 V AC, conventional, compensated [Operations]
Miniature circuit-breaker B16 or fuse 8 A (slow)
Switching frequency
>Mechanical operations
from power supply: yes
From the inputs: yes
in groups
Safe isolation according to EN 50178: 300 V AC
Basic isolation: 600 V AC
Switching frequency
>Switching frequency
10 x 106
Switching frequency
>Resistive load/lamp load
8 A
Switching frequency
>Inductive load
> 500 mA
UL/CSA
>Uninterrupted current at 240 V AC
16 A
UL/CSA
>Uninterrupted current at 24 V DC
16 A
UL/CSA
>AC
>Control Circuit Rating Codes (utilization category)
6 kV
UL/CSA
>AC
>Max. rated operational voltage
250 V AC
UL/CSA
>AC
>max. thermal continuous current cos ϕ = 1 at B 300
250 V AC
UL/CSA
>AC
>max. make/break cos ϕ ≠ capacity 1 at B 300
300 between coil and contact
300 between two contacts V AC
UL/CSA
>DC
>Control Circuit Rating Codes (utilization category)
300000
UL/CSA
>DC
>Max. rated operational voltage
200000
UL/CSA
>DC
>Max. thermal uninterrupted current at R 300
300000
UL/CSA
>DC
>Max. make/break capacity at R 300
200000
Bus termination (first and last station) 25000
Rated operational current for specified heat dissipation [In] 25000
Heat dissipation per pole, current-dependent [Pvid] 25000
Equipment heat dissipation, current-dependent [Pvid] 25000
Static heat dissipation, non-current-dependent [Pvs] 25000
Heat dissipation capacity [Pdiss] 10 x 106
Operating ambient temperature min. 10 Hz
Operating ambient temperature max. 2 Hz
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
0.5 Hz
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
10 A
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
8 A
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
B 300 Light Pilot Duty
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
300 V AC
10.2 Strength of materials and parts
>10.2.5 Lifting
5 A
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
3600/360 VA
10.2 Strength of materials and parts
>10.2.7 Inscriptions
R 300 Light Pilot Duty
10.3 Degree of protection of ASSEMBLIES 300 V DC
10.4 Clearances and creepage distances 1 A
10.5 Protection against electric shock 28/28 VA
10.6 Incorporation of switching devices and components
10.7 Internal electrical circuits and connections EASY-NT-R plug (incl. bus terminating resistor 120 Ω)
10.8 Connections for external conductors
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
0 A
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
0 W
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
0 W
10.10 Temperature rise 3.4 W
10.11 Short-circuit rating 0 W
10.12 Electromagnetic compatibility -25 °C
10.13 Mechanical function +55 °C
Contains function building blocks
Contains basic device Meets the product standard´s requirements.
Contains module rack Meets the product standard´s requirements.
Contains power supply Meets the product standard´s requirements.
Contains analogue input module Meets the product standard´s requirements.
Contains analogue output module Meets the product standard´s requirements.
Contains digital input module Does not apply, since the entire switchgear needs to be evaluated.
Contains digital output module Does not apply, since the entire switchgear needs to be evaluated.
Contains function module Meets the product standard´s requirements.
Contains technology module Meets the product standard´s requirements.
Contains communication module Meets the product standard´s requirements.
Contains memory unit Does not apply, since the entire switchgear needs to be evaluated.
Contains simulation module Does not apply, since the entire switchgear needs to be evaluated.
Contains connection cable Is the panel builder´s responsibility.
Contains control unit Is the panel builder´s responsibility.
Contains monitor Is the panel builder´s responsibility.
Contains programming software Is the panel builder´s responsibility.
Contains engineering software Is the panel builder´s responsibility.
Contains visualization The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Contains libraries Is the panel builder´s responsibility.
Contains documentation Is the panel builder´s responsibility.
Contains other components The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Software preinstalled
Product Standards
UL File No. Yes
UL Category Control No. Yes
CSA File No. No
CSA Class No. Yes
North America Certification Yes
Specially designed for North America No
Current Limiting Circuit-Breaker Yes
Degree of Protection Yes