SKU: Eaton-101451
Busbar adapter, 45 mm, 25 A, DIN rail: 1
45mm busbar adapter for 60mm busbar system, one mounting rail, three prefabricated cables (AWG12/4 square millimeter) for connection of switching device, can be used for motor-protective circuit-breaker PKZM0, PKE and DOL starter/ MSC-D(E)(A) with contactor DILM7 to DILM15, rated operational current: 25A
Accessories | Busbar adapters |
For use with | For fitting to flat Cu-busbars with 60 mm between busbar centres, suitable for 5 mm and 10 mm busbar thickness Rated operational current 25 A For DOL Starter |
Rated operational voltage [Ue] | Busbar adapter PKZ0, PKE |
Rated operational current [Ie] | 690 V |
Terminal capacity | 25 A |
Adapter width | AWG 12 (4 mm²) |
Adapter length | 45 mm |
DIN rail | 200 mm |
Adapter width | 1 Quantity |
For use with | 45 mm |
Notes | PKZM0, PKE + DILM7 PKZM0, PKE + DILM9 PKZM0, PKE + DILM12 PKZM0, PKE + DILM15 MSC-D(M)-0,25-M7… - MSC-D(M)-16-M15… |
Rated operational current for specified heat dissipation [In] | Use in combination with individual components PKZM0, PKE, and DILM DOL set PKZM0‐XDM12. Completely mounted and tested combination with MSC-D... |
Heat dissipation per pole, current-dependent [Pvid] | 25 A |
Equipment heat dissipation, current-dependent [Pvid] | 0 W |
Static heat dissipation, non-current-dependent [Pvs] | 1.9 W |
Heat dissipation capacity [Pdiss] | 0 W |
Operating ambient temperature min. | 0 W |
Operating ambient temperature max. | -25 °C |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
+55 °C |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated. |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
Does not apply, since the entire switchgear needs to be evaluated. |
10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
10.4 Clearances and creepage distances | Does not apply, since the entire switchgear needs to be evaluated. |
10.5 Protection against electric shock | Meets the product standard´s requirements. |
10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
10.8 Connections for external conductors | Is the panel builder´s responsibility. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Is the panel builder´s responsibility. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Is the panel builder´s responsibility. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
10.10 Temperature rise | Is the panel builder´s responsibility. |
10.11 Short-circuit rating | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
10.13 Mechanical function | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Mounting rail armament | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Type of electric connection | 1 mounting rail |
Rated current In | 3 conductors AWG 12 |
Min. busbar thickness | 25 A |
Max. busbar thickness | 5 mm |
Width of the adapter | 10 mm |
Rail width | 45 mm |
Busbar distance | 35 mm |
Product Standards | 60 mm |
UL File No. | UL 508A; CSA-C22.2 No. 14; IEC60439-1; CE marking |
UL Category Control No. | E300273 |
North America Certification | NMTR; NMTR7 |
Specially designed for North America | UL listed, certified by UL for use in Canada |
Max. Voltage Rating | No |