101048 MSC-D-12-M17(24VDC)

DOL starter, 380 V 400 V 415 V: 5.5 kW, Ir= 8 - 12 A, 24 V DC, DC
DOL starter, Basic device: MSC, Notes: Also suitable for motors with efficiency class IE3., IE3-ready devices are identified by the logo on their packaging., Motor ratings Motor rating AC-3 380 V 400 V 415 V: P= 5.5 kW, Setting range of overload releases: Ir= 8 - 12 A, Coordination: Type of coordination “1”, Type of coordination “2”, Actuating voltage: 24 V DC, DC, Standards: IEC/EN 60947-4-1, VDE 0660

Ürün Açıklaması

DOL starter, 380 V 400 V 415 V: 5.5 kW, Ir= 8 - 12 A, 24 V DC, DC
DOL starter, Basic device: MSC, Notes: Also suitable for motors with efficiency class IE3., IE3-ready devices are identified by the logo on their packaging., Motor ratings Motor rating AC-3 380 V 400 V 415 V: P= 5.5 kW, Setting range of overload releases: Ir= 8 - 12 A, Coordination: Type of coordination “1”, Type of coordination “2”, Actuating voltage: 24 V DC, DC, Standards: IEC/EN 60947-4-1, VDE 0660
Basic function DOL starters (complete devices)
Basic device MSC
Notes 0000SPC-571
Connection technique Also suitable for motors with efficiency class IE3.
IE3-ready devices are identified by the logo on their packaging.
Connection to SmartWire-DT Screw terminals
Motor rating [P]
>AC-3
>380 V 400 V 415 V [P]
no
Rated operational current
>AC-3
>380 V 400 V 415 V [Ie]
Rated short-circuit current 380 - 415 V [Iq ] 5.5 kW
Setting range of overload releases [Ir] 11.3 A
Coordination 50 kA
Contact sequence
Actuating voltage 8 - 12 A
Motor-protective circuit-breakers Type of coordination “1”
Type of coordination “2”
Contactor 1210SWI-16
DOL starter wiring set

Mechanical connection element and electrical electric contact module
24 V DC
Notes DC
Standards PKZM0-12 Type
Mounting position DILM17-10(...) Part no.
Ambient temperature PKZM0-XDM32 Type
Rated impulse withstand voltage [Uimp]

The DOL starter (complete device) consists of a PKZM0 motor protective circuit breaker and a DILM contactor.

With the adapter-less top-hat rail mounting of starters up to 15 A, only the motor protective circuit breaker on the top-hat rail requires an adapter. The contactors are provided with mechanical support via a mechanical connection element.

Control wire guide with max. 6 conductors up to 2.5°mm external diameter or 4 conductors up to 3.5°mm external diameter.

From 16 A, the motor protective circuit breaker and contactor are mounted on the top hat rail adapter plate.

The connection of the main circuit between PKZ and contactor is established with electrical contact modules.

When using the auxiliary contacts DILA‐XHIT… (→ 101042) the plug-in electrical connector can be removed without the removal of the front mounting auxiliary contact.

Overvoltage category/pollution degree
Rated operational voltage [Ue] IEC/EN 60947-4-1, VDE 0660
Rated operational current
>Open, 3-pole: 50 – 60 Hz
>380 V 400 V [Ie]
2115DRW-5
Motor protective circuit breaker PKZM0, PKE -25 - +55
DILM contactors
>Current heat loss
>Current heat loss at Ie to AC-3/400 V
DC operated [Sealing] 6000 V AC
Auxiliary contacts
>Pilot Duty
>AC operated
III/3
Auxiliary contacts
>Pilot Duty
>DC operated
230 - 415 V
Auxiliary contacts
>General Use
>AC
12 A
Auxiliary contacts
>General Use
>AC
Auxiliary contacts
>General Use
>DC
PKZM0 motor-protective circuit-breakers, see motor-protective circuit-breakers/PKZM0 product group
DILM contactors, see contactor product group
DILET timing relay, ETR, see contactors, electronic timing relays product group
Auxiliary contacts
>General Use
>DC
8.1 W
Rated operational current for specified heat dissipation [In]
Heat dissipation per pole, current-dependent [Pvid] 0.86 W
Equipment heat dissipation, current-dependent [Pvid]
Static heat dissipation, non-current-dependent [Pvs] A600
Heat dissipation capacity [Pdiss] P300
Operating ambient temperature min. 600 V
Operating ambient temperature max. 15 A
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
250 V
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
1 A
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
12 A
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
2.7 W
10.2 Strength of materials and parts
>10.2.5 Lifting
8.1 W
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
0.9 W
10.2 Strength of materials and parts
>10.2.7 Inscriptions
0 W
10.3 Degree of protection of ASSEMBLIES -25 °C
10.4 Clearances and creepage distances +55 °C
10.5 Protection against electric shock
10.6 Incorporation of switching devices and components Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections Meets the product standard´s requirements.
10.8 Connections for external conductors Meets the product standard´s requirements.
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
Meets the product standard´s requirements.
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
Meets the product standard´s requirements.
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating Meets the product standard´s requirements.
10.12 Electromagnetic compatibility Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function Meets the product standard´s requirements.
Kind of motor starter Does not apply, since the entire switchgear needs to be evaluated.
With short-circuit release Does not apply, since the entire switchgear needs to be evaluated.
Rated control supply voltage Us at AC 50HZ Is the panel builder´s responsibility.
Rated control supply voltage Us at AC 60HZ Is the panel builder´s responsibility.
Rated control supply voltage Us at DC Is the panel builder´s responsibility.
Voltage type for actuating Is the panel builder´s responsibility.
Rated operation power at AC-3, 230 V, 3-phase Is the panel builder´s responsibility.
Rated operation power at AC-3, 400 V The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Rated power, 460 V, 60 Hz, 3-phase Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated power, 575 V, 60 Hz, 3-phase Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Rated operation current Ie The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Rated operation current at AC-3, 400 V
Overload release current setting
Rated conditional short-circuit current, type 1, 480 Y/277 V Direct starter
Rated conditional short-circuit current, type 1, 600 Y/347 V Yes
Rated conditional short-circuit current, type 2, 230 V 0 - 0 V
Rated conditional short-circuit current, type 2, 400 V 0 - 0 V
Number of auxiliary contacts as normally open contact 24 - 24 V
Number of auxiliary contacts as normally closed contact DC
Ambient temperature, upper operating limit 3 kW
Temperature compensated overload protection 5.5 kW
Release class 0 kW
Type of electrical connection of main circuit 0 kW
Type of electrical connection for auxiliary- and control current circuit 11.3 A
Rail mounting possible 12 A
With transformer 12 - 12 A
Number of command positions 0 A
Suitable for emergency stop 0 A
Coordination class according to IEC 60947-4-3 50 A
Number of indicator lights 50 A
External reset possible 1
With fuse 0
Degree of protection (IP) 60 °C
Degree of protection (NEMA) Yes
Supporting protocol for TCP/IP CLASS 10 A
Supporting protocol for PROFIBUS Screw connection
Supporting protocol for CAN Screw connection
Supporting protocol for INTERBUS Yes
Supporting protocol for ASI No
Supporting protocol for MODBUS 0
Supporting protocol for Data-Highway No
Supporting protocol for DeviceNet Class 2
Supporting protocol for SUCONET 0
Supporting protocol for LON No
Supporting protocol for PROFINET IO No
Supporting protocol for PROFINET CBA IP00
Supporting protocol for SERCOS Other
Supporting protocol for Foundation Fieldbus No
Supporting protocol for EtherNet/IP No
Supporting protocol for AS-Interface Safety at Work No
Supporting protocol for DeviceNet Safety No
Supporting protocol for INTERBUS-Safety No
Supporting protocol for PROFIsafe No
Supporting protocol for SafetyBUS p No
Supporting protocol for other bus systems No
Width No
Height No
Depth No
Product Standards No
UL File No. No
UL Category Control No. No
CSA File No. No
CSA Class No. No
North America Certification No
Specially designed for North America No