SKU: Eaton-100414
DOL starter, 380 V 400 V 415 V: 7.5 kW, Ir= 10 - 16 A, 230 V 50 Hz, 240 V 60 Hz, AC
DOL starter, Basic device: MSC, Notes: Not suitable for motors with efficiency class IE3., Motor ratings Motor rating AC-3 380 V 400 V 415 V: P= 7.5 kW, Setting range of overload releases: Ir= 10 - 16 A, Coordination: Type of coordination “1”, Actuating voltage: 230 V 50 Hz, 240 V 60 Hz, AC, Standards: IEC/EN 60947-4-1, VDE 0660
| Basic function | DOL starters (complete devices) |
| Basic device | MSC |
| Notes | Not suitable for motors with efficiency class IE3. |
| Connection technique | Screw terminals |
| Connection to SmartWire-DT | no |
| Motor rating [P] >AC-3 >380 V 400 V 415 V [P] |
|
| Rated operational current >AC-3 >380 V 400 V 415 V [Ie] |
7.5 kW |
| Rated short-circuit current 380 - 415 V [Iq ] | 15.2 A |
| Setting range of overload releases |
50 kA |
| Coordination | |
| Contact sequence | 10 - 16 A |
| Actuating voltage | Type of coordination “1” |
| Motor-protective circuit-breakers | |
| |
230 V 50 Hz, 240 V 60 Hz |
| DOL starter wiring set Mechanical connection element and electrical electric contact module |
AC |
| Notes | PKZM0-16 Type |
| Notes | DILM15-10(...) Part no. |
| Standards | PKZM0-XDM12 Type |
| Mounting position | BK25/3-PKZ0-E extension terminal and if necessary B3.../...-PKZ0 three-phase commoning link can be added to motor-starter combinations to make Type F starters in accordance with UL508. |
| Altitude | The DOL starters (complete units) consist of a PKZM0 motor protective circuit breaker and a DILM contactor. With the adapter-less top-hat rail mounting of starters up to 15 A, only the motor protective circuit breaker on the top-hat rail requires an adapter. The contactors are provided with mechanical support via a mechanical connection element. Control wire guide with max. 6 conductors up to 2.5 mm external diameter or 4 conductors up to 3.5 mm external diameter. The connection of the main circuit between PKZ and contactor is established with electrical contact modules. When using the auxiliary contacts DILA‐XHIT… (￫ 101042) the plug-in electrical connector can be removed without the removal of the front mounting auxiliary contact. |
| Ambient temperature | |
| Rated impulse withstand voltage [Uimp] | IEC/EN 60947-4-1, VDE 0660 |
| Overvoltage category/pollution degree | |
| Rated operational voltage [Ue] | Max. 2000 m |
| Rated operational current >Open, 3-pole: 50 – 60 Hz >380 V 400 V [Ie] |
-25 - +55 |
| Motor protective circuit breaker PKZM0, PKE | |
| DILM contactors >Current heat loss >Current heat loss at Ie to AC-3/400 V |
6000 V AC |
| DILM contactors >Power consumption of the coil in a cold state and 1.0 x US >Dual-voltage coil 50 Hz [Sealing] |
III/3 |
| Auxiliary contacts >Pilot Duty >AC operated |
230 - 415 V |
| Auxiliary contacts >Pilot Duty >DC operated |
15 A |
| Auxiliary contacts >General Use >AC |
|
| Auxiliary contacts >General Use >AC |
PKZM0 motor-protective circuit-breakers, see motor-protective circuit-breakers/PKZM0 product group DILM contactors, see contactor product group DILET timing relay, ETR, see contactors, electronic timing relays product group |
| Auxiliary contacts >General Use >DC |
10.5 W |
| Auxiliary contacts >General Use >DC |
1.4 W |
| Rated operational current for specified heat dissipation [In] | |
| Heat dissipation per pole, current-dependent [Pvid] | A600 |
| Equipment heat dissipation, current-dependent [Pvid] | P300 |
| Static heat dissipation, non-current-dependent [Pvs] | 600 V |
| Heat dissipation capacity [Pdiss] | 15 A |
| Operating ambient temperature min. | 250 V |
| Operating ambient temperature max. | 1 A |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
|
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
15.5 A |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
3.5 W |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
10.5 W |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
1.4 W |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
0 W |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
-25 °C |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
+55 °C |
| 10.3 Degree of protection of ASSEMBLIES | |
| 10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
| 10.8 Connections for external conductors | Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
| 10.10 Temperature rise | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.11 Short-circuit rating | Meets the product standard´s requirements. |
| 10.12 Electromagnetic compatibility | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.13 Mechanical function | Does not apply, since the entire switchgear needs to be evaluated. |
| Kind of motor starter | Is the panel builder´s responsibility. |
| With short-circuit release | Is the panel builder´s responsibility. |
| Rated control supply voltage Us at AC 50HZ | Is the panel builder´s responsibility. |
| Rated control supply voltage Us at AC 60HZ | Is the panel builder´s responsibility. |
| Rated control supply voltage Us at DC | Is the panel builder´s responsibility. |
| Voltage type for actuating | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Rated operation power at AC-3, 230 V, 3-phase | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Rated operation power at AC-3, 400 V | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Rated power, 460 V, 60 Hz, 3-phase | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Rated power, 575 V, 60 Hz, 3-phase | |
| Rated operation current Ie | |
| Rated operation current at AC-3, 400 V | Direct starter |
| Overload release current setting | Yes |
| Rated conditional short-circuit current, type 1, 480 Y/277 V | 230 - 230 V |
| Rated conditional short-circuit current, type 1, 600 Y/347 V | 0 - 0 V |
| Rated conditional short-circuit current, type 2, 230 V | 0 - 0 V |
| Rated conditional short-circuit current, type 2, 400 V | AC |
| Number of auxiliary contacts as normally open contact | 4 kW |
| Number of auxiliary contacts as normally closed contact | 7.5 kW |
| Ambient temperature, upper operating limit | 0 kW |
| Temperature compensated overload protection | 0 kW |
| Release class | 15.2 A |
| Type of electrical connection of main circuit | 15 A |
| Type of electrical connection for auxiliary- and control current circuit | 16 - 16 A |
| Rail mounting possible | 0 A |
| With transformer | 0 A |
| Number of command positions | 0 A |
| Suitable for emergency stop | 0 A |
| Coordination class according to IEC 60947-4-3 | 1 |
| Number of indicator lights | 0 |
| External reset possible | 60 °C |
| With fuse | Yes |
| Degree of protection (IP) | CLASS 10 A |
| Degree of protection (NEMA) | Screw connection |
| Supporting protocol for TCP/IP | Screw connection |
| Supporting protocol for PROFIBUS | Yes |
| Supporting protocol for CAN | No |
| Supporting protocol for INTERBUS | 0 |
| Supporting protocol for ASI | No |
| Supporting protocol for MODBUS | Class 1 |
| Supporting protocol for Data-Highway | 0 |
| Supporting protocol for DeviceNet | No |
| Supporting protocol for SUCONET | No |
| Supporting protocol for LON | IP20 |
| Supporting protocol for PROFINET IO | Other |
| Supporting protocol for PROFINET CBA | No |
| Supporting protocol for SERCOS | No |
| Supporting protocol for Foundation Fieldbus | No |
| Supporting protocol for EtherNet/IP | No |
| Supporting protocol for AS-Interface Safety at Work | No |
| Supporting protocol for DeviceNet Safety | No |
| Supporting protocol for INTERBUS-Safety | No |
| Supporting protocol for PROFIsafe | No |
| Supporting protocol for SafetyBUS p | No |
| Supporting protocol for other bus systems | No |
| Width | No |
| Height | No |
| Depth | No |
| Product Standards | No |
| UL File No. | No |
| UL Category Control No. | No |
| CSA File No. | No |
| CSA Class No. | No |
| North America Certification | No |
| Specially designed for North America | No |
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024