SKU: Eaton-051735
Illuminated pushbutton actuator, without button plate, maintained
Illuminated pushbutton actuator, Product range: RMQ16, Single unit, Design: Flat, maintained, Description: without light elements, With base, W2x4,6d; max. 30 V, 1 W, Degree of Protection: IP65, Connection to SmartWire-DT: no, Front dimensions: 18 x 18
Product range | RMQ16 |
Basic function | Illuminated pushbutton actuators |
Single unit/Complete unit | Single unit |
Design | Flat |
Description | maintained |
Degree of Protection | without light elements With base, W2x4,6d; max. 30 V, 1 W |
Connection to SmartWire-DT | IP65 |
Front dimensions | no |
Standards | 18 x 18 |
Lifespan, mechanical [Operations] | IEC/EN 60947 |
Operating frequency [Operations/h] | > 3 x 106 |
Actuating force | ≦ 1800 |
Degree of protection, IEC/EN 60529 | ≦ 4 n |
Climatic proofing | IP65 |
Ambient temperature >Open |
Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 |
Ambient temperature >Enclosed |
-25 - +60 °C |
Mounting position | - 25 - 40 °C |
Mechanical shock resistance | As required |
Terminal capacities | > 40 according to IEC 60068-2-27 Shock duration 11 ms Sinusoidal g |
Blade terminal | 0.5 - 1.0 mm2 |
Fast-on connectors | 2.8 x 0.8 mm to DIN 46244 |
Rated impulse withstand voltage [Uimp] | 2.8 x 0.8 mm to DIN 46247 and IEC 60760 |
Rated insulation voltage [Ui ] | 800 V AC |
Overvoltage category/pollution degree | 250 V |
Rated operational voltage [Ue] | III/3 |
Control circuit reliability >at 24 V DC/5 mA [HF ] |
24 V AC |
Control circuit reliability >at 5 V DC/1 mA [HF ] |
< 10-7, < 1 faults in 107 switch operations Fault probability |
Use of insulated ferrule ISH 2,8 | < 5 x 10-6, < 1 failure in 5 x 106 operations Fault probability |
Rated operational current for specified heat dissipation [In] | >24 V AC/DC recommended >50 V AC or 120 V DC is mandatory, even on unused blade terminals |
Heat dissipation per pole, current-dependent [Pvid] | 0 A |
Equipment heat dissipation, current-dependent [Pvid] | 0 W |
Static heat dissipation, non-current-dependent [Pvs] | 0 W |
Heat dissipation capacity [Pdiss] | 0 W |
Operating ambient temperature min. | 0 W |
Operating ambient temperature max. | -25 °C |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
+60 °C |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.5 Lifting |
Please enquire |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated. |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
Does not apply, since the entire switchgear needs to be evaluated. |
10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
10.4 Clearances and creepage distances | Does not apply, since the entire switchgear needs to be evaluated. |
10.5 Protection against electric shock | Meets the product standard´s requirements. |
10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
10.8 Connections for external conductors | Is the panel builder´s responsibility. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Is the panel builder´s responsibility. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Is the panel builder´s responsibility. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
10.10 Temperature rise | Is the panel builder´s responsibility. |
10.11 Short-circuit rating | Not applicable. |
10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
10.13 Mechanical function | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Colour button | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Number of command positions | Without button plate |
Construction type lens | 1 |
Hole diameter | Square |
Width opening | 16 mm |
Height opening | 0 mm |
Type of button | 0 mm |
Suitable for illumination | Flat |
With protective cover | Yes |
Labelled | No |
Switching function latching | No |
Spring-return | No |
With front ring | Yes |
Material front ring | Yes |
Colour front ring | Plastic |
Degree of protection (IP), front side | Black |
Degree of protection (NEMA), front side | IP65 |
Product Standards | 1 |
UL File No. | IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CE marking |
UL Category Control No. | E29184 |
CSA File No. | NKCR |
CSA Class No. | 46552 |
North America Certification | 3211-03 |
Degree of Protection | UL listed, CSA certified |