Number of locations |
for conventional wiring With moulded cover fixing screws |
Cable entry knockouts |
|
Colour |
8 Qty. |
Single unit/Complete unit |
4 (Bottom) 7 (Side) Quantity x M20 |
Degree of Protection |
Enclosure base RAL 9005, black |
Connection to SmartWire-DT |
Single unit |
Notes |
IP65 |
Static heat dissipation, non-current-dependent [Pvs] |
no |
Operating ambient temperature min. |
Unused locations must be closed off with blanking plates. Each used mounting location must be fitted with a label mount. |
Operating ambient temperature max. |
0 W |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
-25 °C |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
+60 °C |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Please enquire |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
Does not apply, since the entire switchgear needs to be evaluated. |
10.3 Degree of protection of ASSEMBLIES |
Does not apply, since the entire switchgear needs to be evaluated. |
10.4 Clearances and creepage distances |
Meets the product standard´s requirements. |
10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated. |
10.6 Incorporation of switching devices and components |
Meets the product standard´s requirements. |
10.7 Internal electrical circuits and connections |
Does not apply, since the entire switchgear needs to be evaluated. |
10.8 Connections for external conductors |
Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Is the panel builder´s responsibility. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Is the panel builder´s responsibility. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
10.10 Temperature rise |
Is the panel builder´s responsibility. |
10.11 Short-circuit rating |
Is the panel builder´s responsibility. |
10.12 Electromagnetic compatibility |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
10.13 Mechanical function |
Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Number of command positions |
Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Construction type housing |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Material housing |
8 |
Material quality housing |
Surface mounting housing |
Diameter openings |
Plastic |
Colour housing cover |
Other |
Degree of protection (IP) |
16 mm |
Degree of protection (NEMA) |
Grey |
Width |
IP65 |
Height |
1 |
Depth |
153 mm |
Product Standards |
75 mm |
UL File No. |
100 mm |
UL Category Control No. |
IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CE marking |
CSA File No. |
E29184 |
CSA Class No. |
NKCR |
North America Certification |
46552 |
Degree of Protection |
3211-03 |