Ürün Açıklaması

Illuminated selector switch actuator, maintained, 45°, 18 × 18 mm, 2 positions, With thumb-grip, green, with VS anti-rotation tab, with filament bulb, 24 V
Illuminated selector switch actuator, Product range: RMQ16, Single unit, Design: With thumb-grip, maintained, with VS anti-rotation tab, with filament bulb, 24 V, 2 positions, Colour Thumb-grip: green, Degree of Protection: IP65, Connection to SmartWire-DT: no, Front dimensions: 18 × 18 mm, Degree of Protection: IP65

Product range	RMQ16
Basic function	Illuminated selector switch actuator
Single unit/Complete unit	Single unit
Design	With thumb-grip
Description	maintained
Thumb-grip	45°
Degree of Protection	with VS anti-rotation tab with filament bulb, 24 V
Connection to SmartWire-DT	2 positions
Front dimensions	green
Standards
Lifespan, mechanical [Operations]	IP65
Operating frequency [Operations/h]	no
Operating torque	18 × 18 mm
Degree of protection, IEC/EN 60529	IEC/EN 60947
Climatic proofing	> 3 x 106
Ambient temperature >Open	≦ 1800
Ambient temperature >Enclosed	≦ 0.2 Nm
Mounting position	IP65
Mechanical shock resistance	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Terminal capacities	-25 - +60 °C
Blade terminal	- 25 - 40 °C
Fast-on connectors	As required
Rated impulse withstand voltage [Uimp]	> 40 according to IEC 60068-2-27 Shock duration 11 ms Sinusoidal g
Rated insulation voltage [Ui ]	0.5 - 1.0 mm2
Overvoltage category/pollution degree	2.8 x 0.8 mm to DIN 46244
Rated operational voltage [Ue]	2.8 x 0.8 mm to DIN 46247 and IEC 60760
Control circuit reliability >at 24 V DC/5 mA [HF ]	800 V AC
Control circuit reliability >at 5 V DC/1 mA [HF ]	250 V
Use of insulated ferrule ISH 2,8	III/3
Rated operational current for specified heat dissipation [In]	24 V AC
Heat dissipation per pole, current-dependent [Pvid]	< 10-7 (i.e. 1 failure to 107 operations) Fault probability
Equipment heat dissipation, current-dependent [Pvid]	< 5 x 10-6 (1 failure in 5 x 106 operations) Fault probability
Static heat dissipation, non-current-dependent [Pvs]	>24 V AC/DC recommended >50 V AC or 120 V DC is mandatory, even on unused blade terminals
Heat dissipation capacity [Pdiss]	0 A
Operating ambient temperature min.	0 W
Operating ambient temperature max.	0 W
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	1 W
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	0 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	-25 °C
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	+60 °C
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Please enquire
10.4 Clearances and creepage distances	Does not apply, since the entire switchgear needs to be evaluated.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	Is the panel builder´s responsibility.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Is the panel builder´s responsibility.
Number of switch positions	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Type of control element	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Suitable for illumination	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Colour control element	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Colour indicator light cap	2
Construction type lens	Toggle
Hole diameter	Yes
Width opening	Black
Height opening	Green
Switching function latching	Square
Spring-return	16 mm
With front ring	0 mm
Material front ring	0 mm
Colour front ring	Yes
Degree of protection (IP), front side	No
Degree of protection (NEMA)	Yes
Product Standards	Plastic
UL File No.	Black
UL Category Control No.	IP65
CSA File No.	1
CSA Class No.	IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CE marking
North America Certification	E29184
Degree of Protection	NKCR