SKU: Eaton-34121
Copper busbar, 12x5x1500mm, tinned
Flat copper bar for CI distribution system, tin-plated surface, 12x5 mm, supplied in lengths=1500mm, Ie=160A, CI distribution board up to 160A=1x 12x5
Product range | 60 mm system Compact system |
Accessories | Flat copper bars |
Single unit/Complete unit | Modular system |
Description | Flat copper busbars |
Surface finish | Tinned |
Rated operational current [Ie] | 160 A |
Length | 1500 mm |
For use with | SH0165/2 |
Cu factor | 0,80 kg |
Width | |
Height | 12 mm |
Interval between busbar centres | 5 mm |
Material | 60 mm |
Notes | Copper, tinned |
Standards | Calculating material allowance → General information chapter Selecting the busbar cross-section and the device to be used → Engineering chapter |
Interval between busbar centres | |
Interval between busbar centres | EN 13061 |
Rated uninterrupted current | 60 mm |
Rated uninterrupted current [Iu
] >Tu = 35 °C and Ts = 65 °C >with 12 x 5 mm bar [Iu] |
|
Rated uninterrupted current [Iu
] >Tu = 35 °C and Ts = 65 °C >with 20 x 5 mm busbar [Iu] |
60 mm |
Rated uninterrupted current [Iu
] >Tu = 35 °C and Ts = 65 °C >with 30 x 5 mm bar [Iu] |
With temperature deviations, DIN 43671 stipulates that a correction factor k2 must be taken into account |
Rated uninterrupted current [Iu
] >Tu = 35 °C and Ts = 65 °C >with 12 x 10 mm bar [Iu] |
200 A |
Rated uninterrupted current [Iu
] >Tu = 35 °C and Ts = 65 °C >with 20 x 10 mm busbar [Iu] |
320 A |
Rated uninterrupted current [Iu
] >Tu = 35 °C and Ts = 65 °C >with 30 x 10 mm busbar [Iu] |
450 A |
Rated operational current [Ie] | 360 A |
Material | 520 A |
Surface finish | 630 A |
Rated current In | |
Model | 160 A |
Length | |
Width | Copper, tinned |
Height | Tinned |
Flexible | |
Surface protection | For rated uninterrupted current lu of the contact the following applies: according to DIN 43671 correction factor k2 must be taken into account in case of different temperatures. |