SKU: Eaton-032314
Connection, asi, of RMQ22, for surface mounting enclosure
Accessories for the control circuit devices program
| Product range | Accessories |
| Accessories | AS-Interface |
| Basic function accessories | AS-Interface connection |
| Fixing | Front fixing for RMQ-Titan |
| Connection to SmartWire-DT | External connections: 4 inputs/4 outputs For contact and lamp socket elements. RMQ-Titan surface mounting enclosures: M22-I3, M22-I4, M22-I6 |
| Standards | no |
| Radio interference suppression | EN 50081-1 EN 50082-1 |
| Limit value class | EN 55011, EN 55022 |
| Degree of Protection | A |
| Climatic proofing | IP20 |
| Ambient temperature >Open |
Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 |
| Mechanical shock resistance | -25 - +55 °C |
| Vibration to IEC 60068-2-27 (amplitude 1 mm) | > 30 Shock duration 11 ms g |
| Dimensions | 1055 Hz |
| Weight | 92 x 46 x 30 mm |
| Fixing | 0.1 kg |
| Mounting position | Front fixing for RMQ-Titan |
| Rated voltage to AS-Interface Specification | As required |
| Power supply | 26.5 - 31.6 V DC |
| Addressing | Completely from the AS-Interface cable |
| AS-Interface | Via connection to AS-Interface cable |
| Rated operational current at full load | Protected against polarity reversal |
| Rated operational current when idle (no I, O set) | 120 mA |
| Status LEDs | 30 mA |
| Voltage range | AS-Interface voltage: green LED |
| Rated current per input | 24 - 30 V DC |
| High signal level | 3.5 mA |
| Length of connecting cables | ≧ 15 V |
| Outputs, protected against short-circuit | 200 cm |
| Voltage range | 4 Number |
| Max. current carrying capacity >Σ 3 external outputs |
24 V DC (+10/-15%) V DC |
| Length of connecting cables | 60 |
| Profile | 200 cm |
| Specification | S-7.0 |
| Addresses | 2.0 |
| Rated operational current for specified heat dissipation [In] | 31 Number |
| Heat dissipation per pole, current-dependent [Pvid] | 0 A |
| Equipment heat dissipation, current-dependent [Pvid] | 0 W |
| Static heat dissipation, non-current-dependent [Pvs] | 0 W |
| Heat dissipation capacity [Pdiss] | 1.5 W |
| Operating ambient temperature min. | 0 W |
| Operating ambient temperature max. | -25 °C |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
+55 °C |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Please enquire |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.8 Connections for external conductors | Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
| 10.10 Temperature rise | Is the panel builder´s responsibility. |
| 10.11 Short-circuit rating | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Type of electrical accessory | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Type of mechanical accessory | Other |
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024