SKU: Eaton-10094
Contactor relay, 24 V 50 Hz, N/O = Normally open: 4 N/O, Screw terminals, AC operation
Contactor relay, Product range: DILER Mini-contactors, Application: Contactor relays, Description: with interlocked opposing contacts, Connection technique: Screw terminals, Rated operational current Conventional free air thermal current, 1 pole Open at 50 °C: Ith =Ie= 10 A, Rated operational current AC-15 220 V 230 V 240 V: Ie= 6 A, 380 V 400 V 415 V: Ie= 3 A, Contacts N/O = Normally open: 4 N/O, Code number and version of combination Distinctive number: 40 E, For use with: …DILE, Actuating voltage: 24 V 50 Hz, Voltage AC/DC: AC operation, Degree of Protection: IP20, Instructions: Contact numbers to EN 50011, Coil terminal markings to EN 50005, Standards: IEC/EN 60947, EN 60947-5-1, VDE 0660, UL, CSA
| Product range | DILER Mini-contactors |
| Application | Contactor relays |
| Description | with interlocked opposing contacts |
| Connection technique | Screw terminals |
| Conventional free air thermal current, 1 pole >Open >at 50 °C [Ith =Ie] |
|
| AC-15 >220 V 230 V 240 V [Ie] |
10 A |
| AC-15 >380 V 400 V 415 V [Ie] |
6 A |
| N/O = Normally open | 3 A |
| Contact sequence | |
| Distinctive number | 4 N/O |
| For use with | |
| Actuating voltage | |
| Voltage AC/DC | 40 E |
| Instructions | …DILE |
| Standards | 24 V 50 Hz |
| Lifespan, mechanical >AC operated [Operations] |
AC operation |
| Maximum operating frequency [Operations/h] | Contact numbers to EN 50011 Coil terminal markings to EN 50005 |
| Climatic proofing | |
| Ambient temperature >Open |
IEC/EN 60947, EN 60947-5-1, VDE 0660, UL, CSA |
| Ambient temperature >Enclosed |
10 x 106 |
| Mounting position >Mounting position |
9000 |
| Mounting position >Mounting position |
Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 |
| Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Basic unit with auxiliary contact module >N/O contact |
-25 - +50 °C |
| Mechanical shock resistance (IEC/EN 60068-2-27) >Half-sinusoidal shock, 10 ms >Basic unit with auxiliary contact module >N/C contact |
- 25 - 40 °C |
| Degree of Protection | As required, except vertical with terminals A1/A2 at the bottom |
| Protection against direct contact when actuated from front (EN 50274) | |
| Altitude | 10 g |
| Weight >AC operated |
8 g |
| Terminal capacities >Screw terminals >Solid |
IP20 |
| Terminal capacities >Screw terminals >Flexible with ferrule |
Finger and back-of-hand proof |
| Terminal capacities >Screw terminals >Solid or stranded |
Max. 2000 m |
| Terminal capacities >Screw terminals >Stripping length |
0.17 kg |
| Terminal capacities >Screw terminals >Terminal screw |
1 x (0.75 - 2.5) 2 x (0.75 - 2.5) mm2 |
| Terminal capacities >Screw terminals >Pozidriv screwdriver |
1 x (0.75 - 1.5) 2 x (0.75 - 1.5) mm2 |
| Terminal capacities >Screw terminals >Standard screwdriver |
18 - 14 1 x (18 - 14) 2 x (18 - 14) AWG |
| Terminal capacities >Screw terminals >Max. tightening torque |
8 mm |
| Interlocked opposing contacts to ZH 1/457, including auxiliary contact module | M3.5 |
| Rated impulse withstand voltage [Uimp] | 2 Size |
| Overvoltage category/pollution degree | 0.8 x 5.5 1 x 6 mm |
| Rated insulation voltage [Ui] | 1.2 Nm |
| Rated operational voltage [Ue] | |
| Safe isolation to EN 61140 >between coil and auxiliary contacts |
Yes |
| Safe isolation to EN 61140 >between the auxiliary contacts |
6000 V AC |
| Rated operational current >Conventional free air thermal current, 1 pole >Open >at 50 °C [Ith =Ie] |
III/3 |
| Rated operational current >AC-15 >220 V 230 V 240 V [Ie] |
690 V AC |
| Rated operational current >AC-15 >380 V 400 V 415 V [Ie] |
600 V AC |
| Rated operational current >AC-15 >500 V [Ie] |
300 V AC |
| Rated operational current >DC current >Notes |
300 V AC |
| Rated operational current >DC current >DC L/R ≦ 15 ms >Contacts in series: >1 [24 V] |
10 A |
| Rated operational current >DC current >DC L/R ≦ 15 ms >Contacts in series: >2 [60 V] |
6 A |
| Rated operational current >DC current >DC L/R ≦ 15 ms >Contacts in series: >3 [110 V] |
3 A |
| Rated operational current >DC current >DC L/R ≦ 15 ms >Contacts in series: >3 [220 V] |
1.5 A |
| Rated operational current >Control circuit reliability [Failure rate] |
Switch-on and switch-off conditions based on DC-13, time constant as specified. |
| Short-circuit rating without welding >Maximum overcurrent protective device >220 V 230 V 240 V |
2.5 A |
| Short-circuit rating without welding >Maximum overcurrent protective device >380 V 400 V 415 V |
2.5 A |
| Short-circuit rating without welding >Short-circuit protection maximum fuse >500 V |
1.5 A |
| Short-circuit rating without welding >Short-circuit protection maximum fuse >500 V |
0.5 A |
| Current heat loss at Ith >AC operated |
<10-8, < one failure at 100 million operations (at Ue = 24 V DC, Umin = 17 V, Imin = 5.4 mA) λ |
| Voltage tolerance >AC operated >Single-voltage coil 50 Hz and dual-voltage coil 50 Hz, 60 Hz [Pick-up] |
4 PKZM0 |
| Voltage tolerance >AC operated >Dual-frequency coil 50/60 Hz [Pick-up] |
4 PKZM0 |
| Power consumption >AC operation >Single-voltage coil 50 Hz and dual-voltage coil 50 Hz, 60 Hz [Pick-up] |
6 A gG/gL |
| Power consumption >AC operation >Single-voltage coil 50 Hz and dual-voltage coil 50 Hz, 60 Hz [Sealing] |
10 A fast |
| Power consumption >AC operation >Single-voltage coil 50 Hz and dual-voltage coil 50 Hz, 60 Hz [Sealing] |
1.1 W |
| duty factor | |
| Changeover time at 100 % US (recommended value) >AC operated closing delay |
0.8 - 1.1 x Uc |
| Changeover time at 100 % US (recommended value) >AC operated N/O contact opening delay |
0.85 - 1.1 x Uc |
| Changeover time at 100 % US (recommended value) >AC operated With auxiliary contact module Max. closing delay |
25 VA |
| Auxiliary contacts >Pilot Duty >AC operated |
4.6 VA |
| Auxiliary contacts >Pilot Duty >DC operated |
1.3 W |
| Auxiliary contacts >General Use >AC |
100 % DF |
| Auxiliary contacts >General Use >AC |
14 - 21 ms |
| Auxiliary contacts >General Use >DC |
8 - 18 ms |
| Auxiliary contacts >General Use >DC |
45 ms |
| Rated operational current for specified heat dissipation [In] | |
| Heat dissipation per pole, current-dependent [Pvid] | A600 |
| Equipment heat dissipation, current-dependent [Pvid] | P300 |
| Static heat dissipation, non-current-dependent [Pvs] | 600 V |
| Heat dissipation capacity [Pdiss] | 10 A |
| Operating ambient temperature min. | 250 V |
| Operating ambient temperature max. | 0.5 A |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
|
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
6 A |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
0.4 W |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
0 W |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
1.8 W |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
0 W |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
-25 °C |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
+50 °C |
| 10.3 Degree of protection of ASSEMBLIES | |
| 10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
| 10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
| 10.8 Connections for external conductors | Meets the product standard´s requirements. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
| 10.10 Temperature rise | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.11 Short-circuit rating | Meets the product standard´s requirements. |
| 10.12 Electromagnetic compatibility | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.13 Mechanical function | Does not apply, since the entire switchgear needs to be evaluated. |
| Rated control supply voltage Us at AC 50HZ | Is the panel builder´s responsibility. |
| Rated control supply voltage Us at AC 60HZ | Is the panel builder´s responsibility. |
| Rated control supply voltage Us at DC | Is the panel builder´s responsibility. |
| Voltage type for actuating | Is the panel builder´s responsibility. |
| Rated operation current Ie, 400 V | Is the panel builder´s responsibility. |
| Connection type auxiliary circuit | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Mounting method | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Interface | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Number of auxiliary contacts as normally closed contact | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Number of auxiliary contacts as normally open contact | |
| Number of auxiliary contacts as normally closed contact, delayed switching | |
| Number of auxiliary contacts as normally open contact, leading | 24 - 24 V |
| With LED indication | 0 - 0 V |
| Number of auxiliary contacts as change-over contact | 0 - 0 V |
| Manual operation possible | AC |
| Product Standards | 3 A |
| UL File No. | Screw connection |
| UL Category Control No. | DIN-rail/screw |
| CSA File No. | No |
| CSA Class No. | 0 |
| North America Certification | 4 |
| Specially designed for North America | 0 |
| Accessories | 0 |
| Characteristic curve | No |
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024