Ürün Açıklaması

Insulated enclosure, smooth sides, HxWxD=250x375x150mm, NA type
Individual basic enclosure, UL approved, material characteristic polycarbonate, impact-resistant, degree of protection IP65, optional lockable with DVZ...-CI, patented cover fasteners with integrated overpressure compensation, smooth sides, without knockouts, fixing straps for wall fixing, sealable cover fasteners, RAL 7035, grey (base), transparent smoky, (cover), mounting depth with mounting plate=125mm, cover type: transparent smoky, base type: smooth

Product range	xEnergy Safety Ci
Basic function	Basic enclosures
Product function	Individual enclosure for North America Individual enclosures with covers
Single unit/Complete unit	Stand-alone device
Standards	UL508A
Degree of Protection	IP65
Description	Smooth side plates, without knockouts Sealable cover fasteners Include fixing straps for wall mounting
Colour	RAL 7035, light gray (base) Transparent, smoky gray (cover)
Width
Height	375 mm
Depth	250 mm
Mounting depth:	150 mm
Type cover	125 mm
Model base	Transparent
Standards	RAL 7035, smooth sides
Climatic proofing
Ambient temperature	UL508A
Degree of Protection	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Operating and ambient conditions to VDE 0660 Part 500 >Surface finish	-40 - +80 °C
Surface treatment	IP65
Surface finish	RAL 7035 (base)
Electrical >Track resistance
Electrical >Surface resistance to IEC 60093	Resistant to corrosion
Electrical >Dielectric strength to IEC 60243-1	RAL 7035 (base)
Mechanical >Impact resistance
Atmospheric >Saline spray	KB160, KC175 (base, to IEC 60112) KB100, KC200 (cover, to IEC 60112)
Atmospheric >UV resistance	1 Ω x 1013
Atmospheric >Water consumption to DIN EN ISO 62	30 kV/mm
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890 >Individual enclosure for wall mounting [PV]	please require
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890 >Starting enclosure for wall mounting [PV]	IEC 60068-2-11
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890 >Middle enclosure for wall mounting [PV]	Beneath protective shield
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890 >Individual enclosure for wall mounting [PV]	0.29 %
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890 >Starting enclosure for wall mounting [PV]
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890 >Middle enclosure for wall mounting [PV]	20 W
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	19 W
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	18 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	41 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	39 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	37 W
10.2 Strength of materials and parts >10.2.5 Lifting
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Lower part: 960 °C / cover: 850 °C; meets the product standard´s requirements.
10.5 Protection against electric shock	Not relevant to indoor installations.
10.6 Incorporation of switching devices and components	10 kg per enclosure with support frame and lifting aid met; assembled and secured as per the latest applicable instruction leaflet.
10.7 Internal electrical circuits and connections	IK10
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	IP65
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Protection class 2, therefore not applicable.
10.10 Temperature rise	Is the panel builder´s responsibility.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Ui = 1000 V AC
Mounting method	8 kV
Type of cover	Meets the product standard´s requirements.
Cover model	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Type of door	Is the panel builder´s responsibility.
Transparent cover/door	Is the panel builder´s responsibility.
With lock	Meets the product standard´s requirements.
Nominal current (In)
Height
Width	Surface mounted (plaster)
Depth	Optional
Built-in depth	Closed
Internal depth	None
Plate thickness cabinet	Yes
Plate thickness door/cover	No
Colour	1600 A
RAL-number	250 mm
Number of modules	375 mm
Number of rows	150 mm
Width in number of modular spacings	125 mm
Number of openings for flange plates	125 mm
Extension possible	9 mm
Number of conduit inlets	6 mm
Material housing	Grey
Surface protection	7035
With mounting plate	1
Suitable for outdoor use	0
Suitable for lightning protection	15
Degree of protection (IP)	0
Degree of protection (NEMA)	No
Protection class	0
Impact strength	Plastic
Circuit integrity	Other
Product Standards	No
UL File No.	Yes
UL Category Control No.	Yes
North America Certification	IP65
Specially designed for North America	4X
Suitable for	II
Degree of Protection	IK10