SKU: Wago-787-870
UPS şarj cihazı ve kontrolörü; 24 VDC giriş gerilimi; 24 VDC çıkış gerilimi; 10 A çıkış akımı; LineMonitor; iletişim yeteneği; 2,50 mm²
Nominal input voltage Ui nom | DC 24 V |
Input voltage range | DC 22 … 29 V |
Nominal mains frequency range | 0 Hz |
Input current Ii | ≤ 0,1 A (no load); ≤ 0,8 A (charging); ≤ 10,8 A |
Inrush current | ≤ 4 A (no load) |
Nominal output voltage Uo nom | DC 24 V |
Output voltage range | Ui - 1 VDC (at nominal operation); 20 … 25.5 VDC (at buffer operation) |
Nominal output current Io nom | 10 A |
Akım sınırlaması | tip. 11 - 14 A |
Buffer time | 10 s … 10 min (or continously; adjustable) |
Switch-on threshold (adjustable) | DC 20 … 25,5 V |
Charging current | ≤ 0,6 A |
End-of-charge voltage | DC 26 … 29,5 V (temperature-controlled; optional fixed setting) |
Recommended battery module | 787-871, 787-872, 787-873, 787-876, 787-1671 |
Göstergeler | 1 x LED DC OK (green) 1 x LED warning (yellow) 1 x LED error (red) LCD 3 x signal output (24 VDC, max. 25 mA) 1 x potential-free relay contact (max. 30 VDC, 1 A) 1 x RS-232 interface Battery Control (C+, C-) |
Çalışma göstergesi | LED yeşil (Vo) LED yellow (warning) LED red (error) |
İletişim | RS-232 serial interface |
Uzaktan giriş | tampon işlemini kapatmak için |
Power loss Pv | ≤ 15 W (no load); ≤ 20 W (nominal load) |
Efficiency | 95 % |
Dahili sigorta | 15 AT |
Insulation voltage (connectors-housing) | DC 0,5 kV |
Koruma sınıfı | III |
Koruma sınıfı | IP20 (per EN 60529) |
Ters gerilim koruması | evet |
Feedback voltage | ≤ DC 35 V |
Paralel çalışma | Yes, a maximum three battery modules for buffer time extension (temperature measurement evaluation is only possible via one battery module) |
Series connection | hayır |
MTBF | > 500000 saat |
Connection type (1) | Input/Output |
Bağlantı teknolojisi | CAGE CLAMP® |
WAGO terminal | WAGO 231 Series |
Tek damarlı boylar | 0,08 … 2,5 mm² / 28 … 12 AWG |
İnce bükümlü kablolar | 0,08 … 2,5 mm² / 28 … 12 AWG |
Sıyırma uzunluğu | 8 … 9 mm / 0.31 … 0.35 inch |
Connection type (2) | Signaling |
Bağlantı tipi 2 | CAGE CLAMP® |
WAGO terminal 2 | WAGO 733 Series |
tek damarlı, bağlanabilir | 0,08 … 0,5 mm² / 28 … 20 AWG |
ince bükümlü, bağlanabilir | 0,08 … 0,5 mm² / 28 … 20 AWG |
Sıyırma uzunluğu | 5 … 6 mm / 0.2 … 0.24 inch |
Max. line length | 3 m (Input, Output, Battery Control) |
Width | 40 mm / 1.575 inch |
Height | 163 mm / 6.417 inch |
Length from upper-edge of DIN-35 rail | 163 mm / 6.417 inch |
Note on dimensions | Height iincluding pluggable connector |
Montaj tipi | DIN-35 rail (EN 60715) in 2 positions |
Ağırlık | 800 |
Surrounding air (operating) temperature | -10 … 60 °C |
Surrounding air (storage) temperature | -25 … 85 °C |
Relative humidity | 5 … 96 % (no condensation permissible) |
Kirlilik derecesi | 2 |
Uygunluk işareti | CE |
Standartlar/spesifikasyonlar | EN 60950, UL 60950, UL508, EN 61000-6-2, EN 61000-6-3 |
Product Group | 6 (Interface Electronics) |
SAP´den ambalaj tipi | BOX |
Country of origin | DE |
GTIN | 4045454909857 |
Customs Tariff No. | 85044055900 |