SKU: Wago-753-1630
SMI Master; 230 VAC; açık gri
The 753-1630 SMI Master Module is a standard interface to SMI-compliant electrical drives.
The SMI master operates up to 16 SMI drives. Several SMI masters may be operated within a node.
The module supports the SMI specification (Rev 1.0) functionality.
Communication between applications and SMI drives is performed via special IEC function blocks. These function blocks support both single and group addressing, as well as status monitoring.
The SMI function blocks can be used with the 750 Series Programmable Fieldbus Controllers.
Alternatively, an “Easy Mode” allows functions to be easily controlled without any complicated PLC programming.
The SMI configurator is suitable for addressing, configuring and commissioning SMI drives.
Additional Functions: The programmed commands can be overwritten by an external sensor or switch via additional digital input.
The drive can be switched off by a relay via additional digital output to save energy. The drive is automatically switched on again by the output before the next drive command.
What is SMI:
SMI stands for Standard Motor Interface, a standard interface for electrical drives. SMI was developed to connect drives with integrated electronic circuitry for applications in shutters and sunshade systems.
SMI is a protected word/image mark of the SMI Standard Motor Interface e.V. VR995 District Court Constance.
The 753-1630 SMI Master Module is a standard interface to SMI-compliant electrical drives.
The SMI master operates up to 16 SMI drives. Several SMI masters may be operated within a node.
The module supports the SMI specification (Rev 1.0) functionality.
Communication between applications and SMI drives is performed via special IEC function blocks. These function blocks support both single and group addressing, as well as status monitoring.
The SMI function blocks can be used with the 750 Series Programmable Fieldbus Controllers.
Alternatively, an “Easy Mode” allows functions to be easily controlled without any complicated PLC programming.
The SMI configurator is suitable for addressing, configuring and commissioning SMI drives.
Additional Functions: The programmed commands can be overwritten by an external sensor or switch via additional digital input.
The drive can be switched off by a relay via additional digital output to save energy. The drive is automatically switched on again by the output before the next drive command.
What is SMI:
SMI stands for Standard Motor Interface, a standard interface for electrical drives. SMI was developed to connect drives with integrated electronic circuitry for applications in shutters and sunshade systems.
SMI is a protected word/image mark of the SMI Standard Motor Interface e.V. VR995 District Court Constance.
| Gerätespezifikation | SMI-Master-Interface gemäß Spezifikationen „Datenformat und Rahmenprotokoll SMI“ Rev. 2.3.2 und „SMI-Hardware-Spezifikation“ Rev. 2.0 |
| Number of digital inputs | 1 |
| Number of digital outputs | 1 |
| Number of SMI channels | 1 (1 … 16 SMI slaves per channel) |
| Giriş karakteristikleri | Type 1 |
| Giriş gerilimi (maks.) | 31.2 VDC |
| Output current per channel | 0,5A |
| Bit genişliği | 12-byte data |
| Devreye alma | Via WAGO SMI Configurator and IEC libraries |
| System supply voltage | DC 5 V; via data contacts |
| Current consumption, system supply (5 V) | 42mA |
| Field supply voltage | DC 24 V (-25 … +30 %); über Leistungskontakte (Einspeisung über Messerkontakt; Weiterleitung über Federkontakt) |
| Current consumption, field supply (module with no external load) | 11,8mA |
| İzolasyon | 3 kVAC RMS, 4 kV surge (system/SMI); 1.5 kVAC RMS, 2.5 kV surge (system/field) |
| Number of incoming power jumper contacts | 2 |
| Number of outgoing power jumper contacts | 2 |
| Connection technology: In-/Outputs | 8 x CAGE CLAMP® |
| Connection type (1) | Inputs/Outputs |
| Tek damarlı boylar | 0,08 … 2,5 mm² / 28 … 14 AWG |
| İnce bükümlü kablolar | 0,08 … 2,5 mm² / 28 … 14 AWG |
| Sıyırma uzunluğu | 8 … 9 mm / 0.31 … 0.35 inch |
| Anschlussanforderung zulässige Leitungslänge | 350m |
| Connection requirement (permissible cable type) | 2-line, unshielded |
| Width | 12 mm / 0.472 inch |
| Height | 69,8 mm / 2.748 inch |
| DIN rayın üst kenarından yükseklik | 62,6 mm / 2.465 inch |
| Depth | 100 mm / 3.937 inch |
| Montaj tipi | DIN 35 ray |
| Tak-çıkar konnektör | yes |
| Renk | açık gri |
| Gövde malzemesi | Polycarbonate, polyamide 6.6 |
| Yangın yükü | 0,957MJ |
| Ağırlık | 71,2 |
| Uygunluk işareti | CE |
| Surrounding air (operating) temperature | 0 … 55 °C |
| Surrounding air (storage) temperature | -40 … 85 °C |
| Koruma sınıfı | IP20 |
| Kirlilik derecesi (5) | 2 per IEC 61131-2 |
| Çalışma yüksekliği | 0 … 2000 m |
| Montaj pozisyonu | horizontal (standing/lying) or vertical |
| Nısbi nem (yoğuşmasız) | 95% |
| Titreşime dayanıklı | acc. to IEC 60068-2-6 |
| Darbe direnci | 15g per IEC 60068-2-27 |
| Kirletici maddelere maruziyet | Per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H2S contaminant concentration at a relative humidity |
10ppm |
| Permissible SO2 contaminant concentration at a relative humidity |
25ppm |
| SAP´den ambalaj tipi | BOX |
| Country of origin | DE |
| GTIN | 4055143592277 |
| Customs Tariff No. | 85389099990 |
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024