Kontrolör BACnet MS/TP; açık gri
The BACnet MS/TP Controller (750-829) connects the WAGO‐I/O-SYSTEM with the BACnet protocol. The 750-829 Controller supports the B‐BC BACnet device profile per DIN EN ISO 16484‐5. It communicates with other BACnet devices via BACnet MS/TP.
The controller provides the three following functionalities:
The IEC 61131-3 programmable controller is multitasking-capable and features a battery-backed RTC.
The ETHERNET service interfaces can be used for IEC downloads, for example. Furthermore, two ETHERNET interfaces and an integrated switch allow the ETHERNET fieldbus to be wired in a line topology. This eliminates additional network devices, such as switches or hubs. Both interfaces support Auto-Negotiation and Auto-MDI(X).
An integrated Webserver provides configuration options to the user, while displaying controller´s status information. The Webserver cannot be used via BACnet MS/TP.
For initial start-up, access to the Web-based Management (WBM) via standard Web browser is required to set the baud rate and activate the MS/TP fieldbus. Further configuration and commissioning is performed via a Windows software WAGO BACnet Configurator (V1.8 or higher) and requires an additional BACnet router within the network.
The Protocol Implementation Statement (PICS) contains all supported objects, services and properties. The controller supports a maximum of 250 BACnet objects.
A slide switch enables the switching on of a terminating resistor together with the BIAS network on the RS-485 interface.
The WAGO BACnet Configurator can be downloaded for free at www.wago.com.
The BACnet MS/TP Controller (750-829) connects the WAGO‐I/O-SYSTEM with the BACnet protocol. The 750-829 Controller supports the B‐BC BACnet device profile per DIN EN ISO 16484‐5. It communicates with other BACnet devices via BACnet MS/TP.
The controller provides the three following functionalities:
The IEC 61131-3 programmable controller is multitasking-capable and features a battery-backed RTC.
The ETHERNET service interfaces can be used for IEC downloads, for example. Furthermore, two ETHERNET interfaces and an integrated switch allow the ETHERNET fieldbus to be wired in a line topology. This eliminates additional network devices, such as switches or hubs. Both interfaces support Auto-Negotiation and Auto-MDI(X).
An integrated Webserver provides configuration options to the user, while displaying controller´s status information. The Webserver cannot be used via BACnet MS/TP.
For initial start-up, access to the Web-based Management (WBM) via standard Web browser is required to set the baud rate and activate the MS/TP fieldbus. Further configuration and commissioning is performed via a Windows software WAGO BACnet Configurator (V1.8 or higher) and requires an additional BACnet router within the network.
The Protocol Implementation Statement (PICS) contains all supported objects, services and properties. The controller supports a maximum of 250 BACnet objects.
A slide switch enables the switching on of a terminating resistor together with the BIAS network on the RS-485 interface.
The WAGO BACnet Configurator can be downloaded for free at www.wago.com.
| İletişim | BACnet MS/TP Modbus TCP Ethernet |
| Protokoller | HTTP BootP DHCP DNS SNTP FTP SNMP SMTP |
| Visualization | Web-Visu |
| CPU | 32 bits |
| Programming languages per IEC 61131-3 | Instruction List (IL) Ladder Diagram (LD) Function Block Diagram (FBD), Continuous Function Chart (CFC) Structured Text (ST) Sequential Function Chart (SFC) |
| Programlama | WAGO-I/O-PRO V2.3 |
| Configuration options | WAGO-I/O-CHECK BACnet Configurator Web-based management |
| Maks. ağ uzunluğu | IEEE 802.3 standardına göre |
| Baud rate | BACnet MS/TP: 38,4 kBd (9600, 19200, 38400*, 57600, 76800, 115200 baud (per BACnet standard); *Factory default setting) |
| Fieldbus segment length max. | BACnet MS/TP: 1200 m; Depends on baud rate/cable (per BACnet standard) 1200 m at ≤ 76800 baud; 1000 m at > 76800 baud; ETHERNET: 100 m |
| Transmission medium (communication/fieldbus) | ETHERNET: Twisted Pair S-UTP, STP 100 Ω Cat. 5e |
| Program memory | 1024 kByte |
| Data memory | 1024 kByte |
| Software non-volatile memory | 32kbyte |
| Memory for fieldbus input variables max. | 512Byte |
| Memory for fieldbus output variables max. | 512Byte |
| I/O modülü sayısı (düğüm başına) | 99 |
| Number of I/O modules without bus extension max. | 64 |
| Input and output process image (Fieldbus) max. | 1953.125 Byte/1953.125 Byte |
| Device-specific | BACnet device profile: B-BC (BACnet Building Controller); BACnet version: 1.7 |
| Powerfail RTC buffer | Min. six days |
| Indicators | LED (LINK/ACT) green: Network connection Port 1 … 2; LED (MS/BT, NS) red/green: Status of node/BACnet, network; LED (I/O, USR) red/green/orange: Internal data bus status, status programmable by user; LED (A, B) green: System power supply status, field supply |
| System supply voltage | DC 24 V(-25 … +30 %); via wiring level (CAGE CLAMP® connection) |
| Anma yükünde giriş akımı tip. (24 V) | 500mA |
| Nominal yükte güç kaynağı verimi (tip.) (24 V) | 90% |
| Current consumption, system supply (5 V) | 450mA |
| Total current for system supply | 1.700mA |
| Field supply voltage | DC 24 V (-25 … +30 %); via power jumper contacts |
| Current carrying capacity of the power jumper contacts | 10A |
| Number of outgoing power jumper contacts | 3 |
| İzolasyon | 500 V system/supply; BACnet MS/TP: 1500 V (per BACnet standard) |
| WSPCert sertifikası | in Vorbereitung |
| Connection technology: communication/fieldbus | BACnet MS/TP: 1 x 4-pole male connector; Modbus TCP/UDP: 2 x RJ-45 |
| Connection technology: system supply | 2 x CAGE CLAMP® |
| Connection technology: field supply | 6 x CAGE CLAMP® |
| Connection type (1) | System/field supply |
| Tek damarlı boylar | 0,08 … 2,5 mm² / 28 … 14 AWG |
| İnce bükümlü kablolar | 0,08 … 2,5 mm² / 28 … 14 AWG |
| Sıyırma uzunluğu | 8 … 9 mm / 0.31 … 0.35 inch |
| Connection type (2) | Kommunikation/Feldbus: BACnet MS/TP |
| tek damarlı, bağlanabilir | 0,2 … 2,5 mm² / 24 … 12 AWG |
| ince bükümlü, bağlanabilir | 0,2 … 2,5 mm² / 24 … 12 AWG |
| Sıyırma uzunluğu | 9 … 10 mm / 0.35 … 0.39 inch |
| Connection technology: Device configuration | 1 x 4-pole male connector |
| Width | 61,5 mm / 2.421 inch |
| Height | 71,9 mm / 2.831 inch |
| DIN rayın üst kenarından yükseklik | 64,7 mm / 2.547 inch |
| Depth | 100 mm / 3.937 inch |
| Ağırlık | 168,9 |
| Renk | açık gri |
| Gövde malzemesi | Polycarbonate, polyamide 6.6 |
| Uygunluk işareti | CE |
| Surrounding air (operating) temperature | 0 … 55 °C |
| Surrounding air (storage) temperature | -40 … 85 °C |
| Koruma sınıfı | IP20 |
| Kirlilik derecesi (5) | 2 per IEC 61131-2 |
| Çalışma yüksekliği | without temperature derating: 0 … 2000 m; with temperature derating: 2000 … 5000 m (0.5 K/100 m); max.: 5000 m |
| Nısbi nem (yoğuşmasız) | 95% |
| Montaj pozisyonu | herhangi |
| Montaj tipi | DIN 35 ray |
| Titreşime dayanıklı | acc. to IEC 60068-2-6 |
| Darbe direnci | 15g per IEC 60068-2-27 |
| EMV-Störfestigkeit | acc. to EN 61000-6-2 |
| EMU: |
acc. to EN 61000-6-3 |
| Kirletici maddelere maruziyet | Per IEC 60068-2-42 and IEC 60068-2-43 |
| Permissible H2S contaminant concentration at a relative humidity |
10ppm |
| Permissible SO2 contaminant concentration at a relative humidity |
25ppm |
| SAP´den ambalaj tipi | BOX |
| Country of origin | DE |
| GTIN | 4055143235310 |
| Customs Tariff No. | 85371091990 |
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024