Ürün Açıklaması

Güç kaynağı konnektörü; 2,50 mm²; gri

Note:
Terminating Aluminum Conductors
WAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste is used for termination.

“Alu-Plus” Contact Paste Advantages:

• Automatically destroys the oxide film during clamping.
• Prevents fresh oxidation at the clamping point.
• Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
• Provides long-term protection against corrosion.

Using terminal blocks with PUSH WIRE® Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with “Alu-Plus” Contact Paste.

It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.

Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors:
2.5 mm² (14 AWG) = 16 A
4 mm² (12 AWG) = 22 A
Güvenlik bilgisi 1:
Topraklı elektrik hatlarında

Anma gerilimi (II / 2)	400V
Şok gerilimi(2)	4kV
Nominal akım	24A
Legend (ratings)	(II / 2) ≙ Overvoltage category II / Pollution degree 2
Connection type (1)	Installation side:
Bağlantı teknolojisi	PUSH WIRE®
Actuation type	Push-in
Connectable conductor materials	Copper Aluminum
Tek damarlı boylar	1 … 2,5 mm² / 14 … 12 AWG
Sıyırma uzunluğu	9 … 11 mm / 0.35 … 0.43 inch
Connection type (2)	Lighting side:
Bağlantı tipi 2	CAGE CLAMP®
Number of connection points	1
tek damarlı, bağlanabilir	0,5 … 2,5 mm² / 20 … 16 AWG
ince bükümlü, bağlanabilir	0,5 … 2,5 mm² / 20 … 16 AWG
Toplam bağlantı noktası sayısı	2
Toplam potansiyel sayısı	1
Kablolama tipi	Yandan girişli kablolama
Width	8 mm / 0.315 inch
Height	15,5 mm / 0.61 inch
Depth	20,4 mm / 0.803 inch
Renk	gray
Yangın yükü	0,041MJ
Ağırlık	2,1
Continuous operating temperature	105 °C
SAP´den ambalaj tipi	BOX
Country of origin	CH
GTIN	4044918583817
Customs Tariff No.	85369010000