COMPACT birleştirme konnektörü

COMPACT birleştirme konnektörü; tek damarlı iletkenler için; maks. 2,5 mm²; 4 iletkenli; saydam gövde; kırmızı kapak; Ortam sıcaklığı: maks. 60 °C (T60); 2,50 mm²; şeffaf
Advantages:

  • Convenient wiring via extremely compact design
  • Push-in termination of up to eight solid conductors
  • Cross section range: 0.5 … 2.5 mm² (18 … 14 AWG)
  • Any combination of conductor sizes is possible
  • PUSH WIRE® connection terminates solid (“s”) copper conductors

Note:
Terminating Aluminum Conductors
WAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste is used for termination.

“Alu-Plus” Contact Paste Advantages:
  • Automatically destroys the oxide film during clamping.
  • Prevents fresh oxidation at the clamping point.
  • Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
  • Provides long-term protection against corrosion.


Using terminal blocks with PUSH WIRE® Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with “Alu-Plus” Contact Paste.

It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.

Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors:
2.5 mm² (14 AWG) = 16 A
4 mm² (12 AWG) = 22 A
Güvenlik bilgisi 1:
Topraklı elektrik hatlarında

Ürün Açıklaması

COMPACT birleştirme konnektörü; tek damarlı iletkenler için; maks. 2,5 mm²; 4 iletkenli; saydam gövde; kırmızı kapak; Ortam sıcaklığı: maks. 60 °C (T60); 2,50 mm²; şeffaf
Advantages:
  • Convenient wiring via extremely compact design
  • Push-in termination of up to eight solid conductors
  • Cross section range: 0.5 … 2.5 mm² (18 … 14 AWG)
  • Any combination of conductor sizes is possible
  • PUSH WIRE® connection terminates solid (“s”) copper conductors

Note:
Terminating Aluminum Conductors
WAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste is used for termination.

“Alu-Plus” Contact Paste Advantages:
  • Automatically destroys the oxide film during clamping.
  • Prevents fresh oxidation at the clamping point.
  • Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
  • Provides long-term protection against corrosion.


Using terminal blocks with PUSH WIRE® Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with “Alu-Plus” Contact Paste.

It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.

Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors:
2.5 mm² (14 AWG) = 16 A
4 mm² (12 AWG) = 22 A
Güvenlik bilgisi 1:
Topraklı elektrik hatlarında
Anma gerilimi (II / 2) 450V
Şok gerilimi(2) 4kV
Nominal akım 24A
Legend (ratings) (II / 2) ≙ Overvoltage category II / Pollution degree 2
Bağlantı teknolojisi PUSH WIRE®
Actuation type Push-in
Connectable conductor materials Copper
Aluminum
Tek damarlı boylar 0,5 … 2,5 mm² / 20 … 14 AWG
Sıyırma uzunluğu 11 mm / 0.43 inch
Toplam bağlantı noktası sayısı 4
Toplam potansiyel sayısı 1
Kablolama tipi Yandan girişli kablolama
Width 18 mm / 0.709 inch
Height 5,8 mm / 0.228 inch
Depth 16,7 mm / 0.657 inch
Renk şeffaf
Cover color red
UL 94´e göre tutuşabilirlik değeri V2
Yangın yükü 0,025MJ
Ağırlık 1,3
Surrounding air (operating) temperature 60 °C
Continuous operating temperature 105 °C
T-Marking per EN 60998 T60
Product Group 7 (Push Wire Conn.)
SAP´den ambalaj tipi BOX
Country of origin DE
GTIN 4050821027867
Customs Tariff No. 85369010000