Buatlar için PUSH WIRE® konnektör

Buatlar için PUSH WIRE® konnektör; tek damarlı, bükümlü iletkenler için; maks. 2,5 mm²; 4 iletkenli; saydam gövde; turuncu kapak; maks. ortam çalışma sıcaklığı 60 °C; 2,50 mm²

Note:
Terminating Aluminum Conductors
WAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste is used for termination.

“Alu-Plus” Contact Paste Advantages:

  • Automatically destroys the oxide film during clamping.
  • Prevents fresh oxidation at the clamping point.
  • Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
  • Provides long-term protection against corrosion.


Using terminal blocks with PUSH WIRE® Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with “Alu-Plus” Contact Paste.

It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.

Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors:
2.5 mm² (14 AWG) = 16 A
4 mm² (12 AWG) = 22 A
Güvenlik bilgisi 1:
Topraklı elektrik hatlarında
Güvenlik bilgisi 2:
Özellikle aynı kesitli iletkenler kullanırken 0,75 mm²/AWG 18 de mümkündür.

Ürün Açıklaması

Buatlar için PUSH WIRE® konnektör; tek damarlı, bükümlü iletkenler için; maks. 2,5 mm²; 4 iletkenli; saydam gövde; turuncu kapak; maks. ortam çalışma sıcaklığı 60 °C; 2,50 mm²

Note:
Terminating Aluminum Conductors
WAGO spring clamp terminal blocks are suitable for solid aluminum conductors up to 4 mm²/12 AWG if WAGO “Alu-Plus” Contact Paste is used for termination.

“Alu-Plus” Contact Paste Advantages:
  • Automatically destroys the oxide film during clamping.
  • Prevents fresh oxidation at the clamping point.
  • Prevents electrolytic corrosion between aluminum and copper conductors (in the same terminal block).
  • Provides long-term protection against corrosion.


Using terminal blocks with PUSH WIRE® Spring Pressure Connection Technology, aluminum conductors must first be cleaned with a blade and then immediately be inserted into the clamping units filled with “Alu-Plus” Contact Paste.

It is also possible to apply WAGO “Alu-Plus” additionally on the whole surface of the aluminum conductor before termination.

Please note that the nominal currents must be adapted to the reduced conductivity of the aluminum conductors:
2.5 mm² (14 AWG) = 16 A
4 mm² (12 AWG) = 22 A
Güvenlik bilgisi 1:
Topraklı elektrik hatlarında
Güvenlik bilgisi 2:
Özellikle aynı kesitli iletkenler kullanırken 0,75 mm²/AWG 18 de mümkündür.
Anma gerilimi (II / 2) 400V
Şok gerilimi(2) 4kV
Nominal akım 24A
Legend (ratings) (II / 2) ≙ Overvoltage category II / Pollution degree 2
Bağlantı teknolojisi PUSH WIRE®
Actuation type Push-in
Connectable conductor materials Copper
Aluminum
Tek damarlı boylar 0,75 … 2,5 mm² / 18 … 12 AWG
bükümlü, bağlanabilir 1,5 … 2,5 mm² / 16 … 12 AWG
Sıyırma uzunluğu 12 mm / 0.47 inch
Toplam bağlantı noktası sayısı 4
Toplam potansiyel sayısı 1
Kablolama tipi Yandan girişli kablolama
Width 13 mm / 0.512 inch
Height 13,1 mm / 0.516 inch
Depth 19,5 mm / 0.768 inch
Renk turuncu
Cover color orange
UL 94´e göre tutuşabilirlik değeri V2
Yangın yükü 0,056MJ
Ağırlık 2,5
Surrounding air (operating) temperature 60 °C
Product Group 7 (Push Wire Conn.)
SAP´den ambalaj tipi BOX
Country of origin CN
GTIN 4044918397629
Customs Tariff No. 85369010000