Three-phase control isolating safety transformer, 1.6 kVA, Rated input voltage 50 – 950 ± 5 % V, Rated output voltage 18.5 – 1000 V
Three-phase control transformer performed according to VDE 0550, VDE 0550 part1, IEC/EN 61558-2-2, VDE0570 part 2-2 as safety transformer VDE 0570 part 2-6 and as isolating transformer VDE 0570 part 2-4, UL 506, CSA 22.2 No.66, OVE. Rated input voltage selectable of 50-950V +-5%, rated output voltage can be selected from 18.5 - 1000 rated power 1.6 kVA (*/*) = wildcard for rated input voltage / rated output voltage
| Product range | Three-phase DTZ control transformers |
| Rated input voltage | 50 – 950 ± 5 % V |
| Rated output voltage | 18.5 – 1000 V |
| Rated power | 1.6 kVA |
| Short-time rating | 3.5 kVA |
| Cu factor | 4,40 kg |
| Notes |
When ordering, the type reference must include the following details: DTZ0,1(*/*)*1st wildcard ≙ Nominal input voltage 2nd wildcard ≙ Rated output voltage 3rd wildcard ≙ Configuration Ordering example
The correct type reference is DTZ0,1(200/18,5)DY(N)5 Additional tappings ￫ 931897 |
| Rated operational current for specified heat dissipation [In] | 0 A |
| Heat dissipation per pole, current-dependent [Pvid] | 0 W |
| Equipment heat dissipation, current-dependent [Pvid] | 0 W |
| Static heat dissipation, non-current-dependent [Pvs] | 115 W |
| Heat dissipation capacity [Pdiss] | 0 W |
| Operating ambient temperature min. | -25 °C |
| Operating ambient temperature max. | +40 °C |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
| 10.3 Degree of protection of ASSEMBLIES | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
| 10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.7 Internal electrical circuits and connections | Is the panel builder´s responsibility. |
| 10.8 Connections for external conductors | Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
| 10.10 Temperature rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| 10.11 Short-circuit rating | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| 10.13 Mechanical function | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Built as safety transformer | Yes |
| Built as isolating transformer | Yes |
| Built as energy saving transformer | No |
| Primary voltage 1 | 50 - 950 V |
| Primary voltage 2 | 50 - 950 V |
| Primary voltage 3 | 50 - 950 V |
| Primary voltage 4 | 50 - 950 V |
| Primary voltage 5 | 50 - 950 V |
| Primary voltage 6 | 50 - 950 V |
| Primary voltage 7 | 0 - 0 V |
| Primary voltage 8 | 0 - 0 V |
| Primary voltage 9 | 0 - 0 V |
| Primary voltage 10 | 0 - 0 V |
| Secondary voltage 1 | 18.5 - 1000 V |
| Secondary voltage 2 | 18.5 - 1000 V |
| Secondary voltage 3 | 18.5 - 1000 V |
| Secondary voltage 4 | 18.5 - 1000 V |
| Secondary voltage 5 | 18.5 - 1000 V |
| Secondary voltage 6 | 18.5 - 1000 V |
| Secondary voltage 7 | 0 - 0 V |
| Secondary voltage 8 | 0 - 0 V |
| Secondary voltage 9 | 0 - 0 V |
| Secondary voltage 10 | 0 - 0 V |
| Wiring system | Other |
| Rated power | 1600 VA |
| Type of insulation material acc. IEC 85 | B |
| Short-circuit-proof | No |
| Relative short circuit voltage | 3 % |
| Conductor material | Copper |
| Width | 230 mm |
| Height | 269 mm |
| Depth | 114 mm |
| Degree of protection (IP) | IP00 |
| Degree of protection (NEMA) | Other |
| Product Standards | UL 506; UL5085-1; UL 5085-2; CSA-C22.2 No. 66; CSA-C22.2 No. 66.1-06; CSA-C22.2 No. 66.2-06; IEC/EN 61558-2-2; CE marking |
| UL File No. | E167225 |
| UL Category Control No. | XPTQ2, XPTQ8 |
| CSA File No. | UL report applies to both US and Canada |
| CSA Class No. | – |
| North America Certification | UL recognized, certified by UL for use in Canada |
| Specially designed for North America | No |
| Suitable for | Branch circuits |
| Max. Voltage Rating | 600 V AC |
| Degree of Protection | IEC: IP00, UL/CSA Type: - |
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024