Ürün Açıklaması

Digital residual current circuit-breaker/miniature circuit-breaker, 25A, 30mA, miniature circuit-breaker trip curve: D, 1pole+N residual current circuit-breaker trip characteristic: F
High-quality voltage dependent residual current circuit-breaker/miniature circuit-breaker with overcurrent protection ; contact position display red-green; terminal rear plug protection; tri-stable slide catch—enables removal from an existing closure assembly; comprehensive accessory product range can be retrofitted; wide range of rated fault currents; rated operational currents up to 25 A; trip types B,C,D; rated switching capacity 10 kA; suitable for use in the free (on-site power and outdoor distribution board) to -25 °C;

Number of poles (total)	2
Number of protected poles	2
Rated voltage	240 V
Rated insulation voltage Ui	250 V
Rated impulse withstand voltage Uimp	4 kV
Rated current	10 A
Rated fault current	0.03 A
Leakage current type	A
Current limiting class	3
Rated short-circuit breaking capacity acc. EN 61009	10 kA
Rated short-circuit breaking capacity IEC 60947-2	0 kA
Rated short-circuit breaking capacity Icn acc. EN 61009-1	10 kA
Disconnection characteristic	Short-time delayed
Surge current capacity	3 kA
Voltage type	AC
Frequency	50 Hz
Release characteristic	C
Concurrently switching N-neutral	No
With interlocking device	No
Over voltage category	3
Pollution degree	2
Ambient temperature during operating	-25 - 40 °C
Width in number of modular spacings	2
Built-in depth	70 mm
Suitable for flush-mounted installation	No
Anti-nuisance tripping version	Yes
Degree of protection (IP)	IP20
Connectable conductor cross section solid-core	1 - 25 mm²
Connectable conductor cross section multi-wired	1 - 25 mm²