SKU: Eaton-Y7-300468
electronic residual current circuit-breaker/miniature circuit-breaker, 25A, 10mA, miniature circuit-breaker trip curve: C, 2pole, residual current circuit-breaker trip characteristic: F
voltage dependent residual current circuit-breaker/miniature circuit-breaker with overcurrent protection ; contact position display red-green; terminal rear plug protection; tri-stable slide catch—enables removal from an existing closure assembly; comprehensive accessory product range can be retrofitted; wide range of rated fault currents; rated operational currents up to 25 A; trip types B,C,D; rated switching capacity 10 kA; suitable for use in the free (on-site power and outdoor distribution board) to -25 °C;
Number of poles (total) | 2 |
Number of protected poles | 2 |
Rated voltage | 240 V |
Rated insulation voltage Ui | 250 V |
Rated impulse withstand voltage Uimp | 4 kV |
Rated current | 25 A |
Rated fault current | 0.01 A |
Leakage current type | A |
Current limiting class | 3 |
Rated short-circuit breaking capacity acc. EN 61009 | 10 kA |
Rated short-circuit breaking capacity IEC 60947-2 | 0 kA |
Rated short-circuit breaking capacity Icn acc. EN 61009-1 | 10 kA |
Disconnection characteristic | Short-time delayed |
Surge current capacity | 3 kA |
Voltage type | AC |
Frequency | 50 Hz |
Release characteristic | C |
Concurrently switching N-neutral | No |
With interlocking device | No |
Over voltage category | 3 |
Pollution degree | 2 |
Ambient temperature during operating | -25 - 40 °C |
Width in number of modular spacings | 2 |
Built-in depth | 75 mm |
Suitable for flush-mounted installation | No |
Anti-nuisance tripping version | Yes |
Degree of protection (IP) | IP20 |
Connectable conductor cross section solid-core | 1 - 25 mm² |
Connectable conductor cross section multi-wired | 1 - 25 mm² |