Ürün Açıklaması

ECO Compact distribution board, flush mounting, 3-rows, 12 MU, IP40
ECO Compact distribution board, flush mounting, white RAL9003, IP40 degree of protection to IEC/EN 62208, 12 module units, 3-rows, protection class 2, totally insulated, approved for building service distribution boards in accordance with IEC/EN 61439-3 VDE 0660-600-3, enclosure completely made of ABS, for installing switching and protective devices, in accordance with dimension standard DIN 43 880, with an installation depth of 70 mm, AC 400 V, roHs-compliant, consisting of a plastic base with a top hat DIN-rail made of galvanized sheet steel, finger-proof IP2X neutral and protective conductor terminals, knockout cable entries on top and bottom, top with 46-mm device opening, transparent hinged flap flush with the front and featuring open-position latching, operator only with screw closures, top with sealable bottom, including inscription labels.

Basic function	Basic device
Product function	Installation distribution boards
Product range	ECO DBO
Design	Flush mounted
Installation site	Indoor
Type of installation	Flush mounting
Door/Flap	Transparent
Degree of Protection	IP40
Colour	White
Module rack	Single-rail
Shroud for protection against accidental contact	Plastic
Rows [Count]	3
Module units per row	12
Description	IP40 Protection Class II Plastic housing white (RAL 9003)
Cable entries	Cable entry ribs on top and bottom
PE and N terminals design	Screw terminals
PE and N terminals [Number x cross-sectional area]	PE: 3 x (12 x 10) N: 3 x (12 x 10) mm2
Equipment supplied	Basic device Device support rails Neutral-/protective conductor terminal
Standards	EN 62208_x
RoHS (in accordance with Directive 2002/95/EC of the European Parliament and Council)	conform
Ambient temperature	-20 - +70 °C
Degree of Protection	IP40
Protection class	II (totally insulated)
Rated operational voltage [Ue]	400 V AC
Rated frequency [f]	50 Hz
Material	ABS (plastic)
Colour	white (RAL 9003)
Mechanical >Impact resistance	IK05
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	850 °C; meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Not relevant to indoor installations.
10.2 Strength of materials and parts >10.2.5 Lifting	Does not apply to enclosures without lifting aids.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	IK05
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	IP40
10.4 Clearances and creepage distances	Is the panel builder´s responsibility.
10.5 Protection against electric shock	Protection class 2, therefore not applicable.
10.6 Incorporation of switching devices and components	Is the panel builder´s responsibility.
10.7 Internal electrical circuits and connections	Is the panel builder´s responsibility.
10.8 Connections for external conductors	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Ui = 400 V AC
10.9 Insulation properties >10.9.3 Impulse withstand voltage	3.75 kV
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Meets the product standard´s requirements.
Mounting method	Flush mounted (plaster)
Number of rows	3
Width in number of modular spacings	12
Type of cover	Door
Cover model	Closed
Transparent cover/door	Yes
Material housing	Plastic
Height	550 mm
Width	303 mm
Depth	98 mm
Built-in depth	70 mm
Internal depth	90 mm
DIN-rail	Yes
With mounting plate	No
Extension possible	No
EMC-version	No
Colour	White
RAL-number	9003
Degree of protection (IP)	IP40
With lock	No
Type of closure	Other