Ürün Açıklaması

Illuminated element, LED, white, front mount, 12 V
LED element, Rated operational current: Ie= - 15 mA, Connection to SmartWire-DT: no
Basic function LED elements
Rated operational current, max. [units: mA] [Ie ] 15 mA
Lifespan to EN 60064 at ta = +25 °C [tmean (AC)] 100000 h
Connection to SmartWire-DT no
Approval 116Z024
Ambient temperature
>Open
-25 - +70 °C
Terminal capacities
>Stranded
0.5 - 2.5 mm2
Overvoltage category/pollution degree III/3
Rated operational current for specified heat dissipation [In]

Indoor and protected outdoor installation

Heat dissipation per pole, current-dependent [Pvid] 0 A
Equipment heat dissipation, current-dependent [Pvid] 0 W
Static heat dissipation, non-current-dependent [Pvs] 0 W
Heat dissipation capacity [Pdiss] 0.45 W
Operating ambient temperature min. 0 W
Operating ambient temperature max. -25 °C
10.2 Strength of materials and parts
>10.2.2 Corrosion resistance
+70 °C
10.2 Strength of materials and parts
>10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.4 Resistance to ultra-violet (UV) radiation
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.5 Lifting
Meets the product standard´s requirements.
10.2 Strength of materials and parts
>10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts
>10.2.7 Inscriptions
Does not apply, since the entire switchgear needs to be evaluated.
10.3 Degree of protection of ASSEMBLIES Meets the product standard´s requirements.
10.4 Clearances and creepage distances Does not apply, since the entire switchgear needs to be evaluated.
10.5 Protection against electric shock Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.2 Power-frequency electric strength
Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.3 Impulse withstand voltage
Is the panel builder´s responsibility.
10.9 Insulation properties
>10.9.4 Testing of enclosures made of insulating material
Is the panel builder´s responsibility.
10.10 Temperature rise Is the panel builder´s responsibility.
10.11 Short-circuit rating The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.12 Electromagnetic compatibility Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
10.13 Mechanical function Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Transformer integrated The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
With integrated voltage decreasing resistor No
With light source No
With integrated diode Yes
Lamp holder Yes
Rated voltage Ue at AC 50 Hz None
Rated voltage Ue at AC 60 Hz 12 - 12 V
Rated voltage Ue at DC 12 - 12 V
Voltage type for actuating 12 - 12 V
Lamp type AC/DC
Connection type auxiliary circuit LED
Colour lamp Screw connection
Type of fastening White