Ürün Açıklaması

Palm switch, 2 N/C, emergency switching off, surface mounting
Foot and palm switch, Complete unit, Function: maintained, Description: Pull to release, Emergency stop pushbutton tamper-proof to ISO 13850/EN 418, Contacts N/C = Normally closed: 2 NC, Contacts Notes = safety function, by positive opening to IEC/EN 60947-5-1, Colour Button: Red, Colour enclosure top: Yellow, Colour Enclosure base: Black, Connection to SmartWire-DT: no, Standards: IEC/EN 60947-5-5, VDE 0660, Degree of protection, IEC/EN 60529: IP66, IP67, IP69K, Mounting position: As required

Product range	Foot and palm switches
Basic function	Complete devices
Single unit/Complete unit	Complete unit
Function	maintained
Description	Pull to release Emergency stop pushbutton tamper-proof to ISO 13850/EN 418
N/C = Normally closed	2 NC
Notes	= safety function, by positive opening to IEC/EN 60947-5-1
Button	Red
enclosure top
Enclosure base	Yellow
Approval
Connection to SmartWire-DT	Black
Standards
Lifespan, mechanical [Operations]
Operating frequency [Operations/h]	no
Actuating force	IEC/EN 60947-5-5, VDE 0660
Degree of protection, IEC/EN 60529	> 0.1 x 106
Climatic proofing	≦ 600
Ambient temperature >Open	40 - 60 N
Mounting position	IP66, IP67, IP69
Mechanical shock resistance	Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30
Rated operational current for specified heat dissipation [In]	-25 - +55 °C
Heat dissipation per pole, current-dependent [Pvid]	As required
Equipment heat dissipation, current-dependent [Pvid]	> 15 Shock duration 11 ms Sinusoidal according to IEC 60068-2-27 g
Static heat dissipation, non-current-dependent [Pvs]	6 A
Heat dissipation capacity [Pdiss]	0.11 W
Operating ambient temperature min.	0 W
Operating ambient temperature max.	0 W
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	0 W
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	-25 °C
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	+55 °C
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Please enquire
10.3 Degree of protection of ASSEMBLIES	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Does not apply, since the entire switchgear needs to be evaluated.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	Is the panel builder´s responsibility.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Unlocking method	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Colour cap	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Number of contacts as normally open contact	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Number of contacts as normally closed contact	Pull-release
Switching function latching	Red
Spring-return	0
Hole diameter	2
Degree of protection (IP)	Yes
Degree of protection (NEMA)	No
Product Standards	0 mm
UL File No.	IP67/IP69K
UL Category Control No.	4X
CSA File No.	IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CSA-C22.2 No. 94-91; CE marking
CSA Class No.	E29184
North America Certification	NKCR
Degree of Protection	012528