SKU: Eaton-231270
ASI-Slave safety, 2I, 1Q, screw connection
Accessories for the control circuit devices program
| Product range | Accessories |
| Accessories | AS-Interface |
| Basic function accessories | Emergency switching off circuits |
| Approval | |
| Fixing | Front fixing for RMQ-Titan |
| Connection to SmartWire-DT | AS-Interface slave Adapter element for RMQ-Titan AS-Interface information: 1 dual-channel input, 1 output Module enclosure for snap fitting on the contact and LED elements: - Inputs for 2 contact elements: M22-K01 (break) – Output for 1 LED element: M22-LED-... Including AS-Interface connector as insulation piercing terminal |
| Connection of the AS interface line | no |
| Power supply | Yellow plug-in terminal as insulation piercing terminal |
| Fixing | Completely from the AS-Interface, cable 26.5 - 31.6 V DC |
| Addressing | Front fixing for RMQ-Titan |
| Max. total current | Via AS-Interface cable |
| Ambient temperature | 45 mA A |
| Mechanical shock resistance | -25 - +55 °C |
| Degree of Protection | 30 Shock duration 11 ms according to IEC 60068-2-27 g |
| Climatic proofing | IP20 |
| Mounting position | Damp heat, constant, to IEC 60068-2-78 Damp heat, cyclic, to IEC 60068-2-30 |
| Standards | As required |
| Inputs | EN 50178 EN 50295_x |
| Outputs | 2-channel input (22 V/5 mA) (moduled by code sequence) (2 break contact sets RMQ-Titan M22-K01) |
| Power AS-Interface cable | 1 output, typically 19 V/8 mA, short-circuit proof |
| Error AS-Interface, failure of AS-Interface master | Green LED on the back |
| Profile | Red LED on the back |
| Rated operational current for specified heat dissipation [In] | S-7.B.E |
| Heat dissipation per pole, current-dependent [Pvid] | 0 A |
| Equipment heat dissipation, current-dependent [Pvid] | 0 W |
| Static heat dissipation, non-current-dependent [Pvs] | 0 W |
| Heat dissipation capacity [Pdiss] | 1.5 W |
| Operating ambient temperature min. | 0 W |
| Operating ambient temperature max. | -25 °C |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
+70 °C |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.5 Protection against electric shock | Meets the product standard´s requirements. |
| 10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.7 Internal electrical circuits and connections | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.8 Connections for external conductors | Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
| 10.10 Temperature rise | Is the panel builder´s responsibility. |
| 10.11 Short-circuit rating | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| 10.13 Mechanical function | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
| Built-in diameter | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Number of appliances to build in | 0 mm |
| Product Standards | 0 |
| UL File No. | IEC/EN 60947-5; UL 508; CSA-C22.2 No. 14-05; CSA-C22.2 No. 94-91; CE marking |
| UL Category Control No. | E29184 |
| CSA File No. | NKCR |
| CSA Class No. | 012528 |
| North America Certification | 3211-03 |
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024