Ürün Açıklaması

I/O expansion, For use with easyE4, 100 - 240 V AC, 110 - 220 V DC (cULus: 100-110 V DC), Inputs expansion (number) digital: 8, screw terminal
I/O expansion, Supply voltage: 100 - 240 V AC, 110 - 220 V DC. In cULus applications applies 100-110 VDC to all V DC Information. Can be used via easyConnect, Mounting position: Vertical or horizontal, Protection type (IEC/EN 60529, EN50178, VBG 4): IP20, Standards: EN 61000-6-2, EN 61000-6-3, IEC 60068-2-6, IEC 60068-2-27, IEC 60068-2-30, IEC 60664, IEC 61131-2, EN 61010, EN 50178, cULus per UL 61010, CSA C22.2 No.61010

Product range	Control relays easyE4
Subrange	easyE4 digital input/output enhancements
Basic function	easyE4 extensions
Description	Input/output extension for easyE4 control relay Expandable with the easyE4 series of digital input/output expansions with easy-E4-CONNECT1 connector (Item Y7-197225) Rated operating voltage 100 to 240 VAC or 100 to 240 VDC (cULus: 100 to 110 VDC) Digital inputs: 8 Digital outputs: 8 relays Screw terminals
Inputs expansion (number)
Display	digital: 8
Software
Supply voltage	with diagnostic LED
For use with	EASYSOFT-SWLIC/easySoft 7
Standards	100 - 240 V AC, 100 - 240 V DC (cULus: 100 - 110 V DC)
Approvals >Approvals	easyE4
Approvals >certificate
Approvals >shipping classification	EN 61000-6-2 EN 61000-6-3 IEC 60068-2-6 IEC 60068-2-27 IEC 60068-2-30 IEC 61131-2 EN 61010 EN 50178
Approvals	cULus
Dimensions (W x H x D)	CE
Weight	DNV GL
Mounting
Connection type	71.5 x 90 x 58 mm
Screw terminals >Solid	0.232 kg
Screw terminals >flexible	Top-hat rail IEC/EN 60715, 35 mm or screw fixing using fixing brackets ZB4-101-GF1 (accessories)
Screw terminals >Solid or flexible conductor, with ferrule	screw terminal
Screw terminals >Solid or stranded
Screw terminals >Standard screwdriver	0.2 - 4 mm2
Screw terminals >Tightening torque	0.2 - 2.5 mm2
Screw terminals >Stripping length	0,2 - 2,5 mm2
Operating ambient temperature	22 - 12 AWG
Condensation	0.8 x 3.5 mm
Storage [ϑ]	0.5 - 0.7 Nm
relative humidity	6.5 mm
Air pressure (operation)
Protection type (IEC/EN 60529, EN50178, VBG 4)	-25 to 55, cold as per IEC 60068-2-1, heat as per IEC 60068-2-2 °C
Vibrations	Take appropriate measures to prevent condensation
Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 15 g/11 ms	-40 - +70 °C
Drop to IEC/EN 60068-2-31 [Drop height]	in accordance with IEC 60068-2-30, IEC 60068-2-78 5 - 95 %
Free fall, packaged (IEC/EN 60068-2-32)	795 - 1080 hPa
Mounting position
Overvoltage category/pollution degree	IP20
Electrostatic discharge (ESD) >applied standard	In accordance with IEC 60068-2-6 constant amplitude 0.15 mm: 10 - 57 constant acceleration 2 g: 57 - 150 Hz
Electrostatic discharge (ESD) >Air discharge	18 Impacts
Electrostatic discharge (ESD) >Contact discharge	50 mm
Electromagnetic fields (RFI) to IEC EN 61000-4-3	0.3 m
Radio interference suppression	Vertical or horizontal
Burst
power pulses (Surge)	III/2
Immunity to line-conducted interference to (IEC/EN 61000-4-6)	according to IEC EN 61000-4-2
Clearance in air and creepage distances	8 kV
Insulation resistance	6 kV
Rated operational voltage [Ue]	0.8 - 1.0 GHz: 10 1.4 - 2 GHz: 3 2.0 - 2.7 GHz: 1 V/m
Permissible range [Ue]	EN 61000-6-3 Class B
Residual ripple	according to IEC/EN 61000-4-4 Supply cables: 2 Signal cables: 2 kV
Protection against polarity reversal	according to IEC/EN 61000-4-5 1 kV (supply cables, symmetrical) 2 kV (supply cables, asymmetrical)
Frequency	10 V
Voltage dips
Fuse	nach EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201
Power loss [P]	in accordance with EN 50178, EN 61010-2-201, UL61010-2-201, CSA-C22.2 NO. 61010-2-201
Number
Potential isolation	100 - 240V DC (-15/+10%) 100 - 240 DC (cULus: 100 -110 DC) (-15/+10%) V
Rated operational voltage [Ue]	85 - 264 V AC 85 - 264 V DC (cULus: 85 - 120 V DC)
Input voltage [Ue]	≦ 5 %
Rated frequency	yes
Input current at signal 1	50/60 (± 5%) Hz
Deceleration time	≤ 20 ms at 100V AC 10 ms at 100V DC ms
Cable length	≧ 1A (T) A
Number	Normally 11 W
Outputs in groups of
Parallel switching of outputs for increased output	8
Protection of an output relay	from power supply: no between inputs: no from the outputs: yes to the base unit: yes to the expansion units: yes
Potential isolation	100 - 240 V AC 100 - 240 V DC (cULus: 100 - 110 V DC) V
Contacts >Conventional thermal current (10 A UL)	Condition 0: 0 - 40V AC/DC Condition 1: 79–264 V AC/DC (cULus: 79–264 V AC/79–120 V DC) V
Contacts >Recommended for load: 12 V AC/DC	50/60 Hz
Contacts >Rated impulse withstand voltage Uimp of contact coil	I1 - I8: 8 x 0.25 (at 115V AC, 60 Hz) I1 - I8: 8 x 0.5 (at 230V AC, 50 Hz) I1 - I8: 8 x 0.25 (at 115V DC) I1 - I8: 8 x 0.5 (at 230V DC) mA
Contacts >Rated operational voltage [Ue]	type 39⁄32 (0 - > 1/1 -> 0, 50/60Hz) in AC type 0.5 (0 - > 1/1 -> 0) in DC ms
Rated insulation voltage [Ui]	40 (unshielded) m
Safe isolation according to EN 50178
Making capacity >AC–-15, 250 V AC, 3 A (600 ops./h) [Operations]	8
Making capacity >DC-13, L/R ≦ 150 ms, 24 V DC, 1 A (500 S/h) [Operations]	1
Breaking capacity >AC-15, 250 V AC, 3 A (600 Ops./h) [Operations]	Not permitted
Breaking capacity >DC-13, L/R ≦ 150 ms, 24 V DC, 1 A (500 S/h) [Operations]	B16 circuit breaker or 8 A (T) fuse
Filament bulb load >1000 W at 230/240 V AC [Operations]	Safe isolation according to EN 50178: 300 V AC Basic isolation: 600 V AC from power supply: yes From the inputs: yes between outputs: yes to expansion devices: yes
Filament bulb load >500 W at 115/120 V AC [Operations]	5 A
Fluorescent lamp load >Fluorescent lamp load 10 x 58 W at 230/240 V AC >With upstream electrical device [Operations]	> 500 mA
Fluorescent lamp load >Fluorescent lamp load 10 x 58 W at 230/240 V AC >Uncompensated [Operations]	6 kV
Fluorescent lamp load >Fluorescent lamp load 1 x 58 W at 230/240 V AC, conventional, compensated [Operations]	240 V AC
Switching frequency >Mechanical operations	240 V AC
Switching frequency >Switching frequency	300 between coil and contact 300 between two contacts V AC
Switching frequency >Resistive load/lamp load	300000
Switching frequency >Inductive load	200000
UL/CSA >Uninterrupted current at 240 V AC	300000
UL/CSA >Uninterrupted current at 24 V DC	200000
UL/CSA >AC >Control Circuit Rating Codes (utilization category)	25000
UL/CSA >AC >Max. rated operational voltage	25000
UL/CSA >AC >max. thermal continuous current cos ϕ = 1 at B 300	25000
UL/CSA >AC >max. make/break cos ϕ ≠ capacity 1 at B 300	25000
UL/CSA >DC >Control Circuit Rating Codes (utilization category)	25000
UL/CSA >DC >Max. rated operational voltage	10 x 106
UL/CSA >DC >Max. thermal uninterrupted current at R 300	10 Hz
UL/CSA >DC >Max. make/break capacity at R 300	2 Hz
Power loss [P]	0.5 Hz
Static heat dissipation, non-current-dependent [Pvs]	5 A
Operating ambient temperature min.	5 A
Operating ambient temperature max.	B 300 Light Pilot Duty
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	300 V AC
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	5 A
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	3600/360 VA
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	R 300 Light Pilot Duty
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	300 V DC
10.2 Strength of materials and parts >10.2.5 Lifting	1 A
10.2 Strength of materials and parts >10.2.6 Mechanical impact	28/28 VA
10.2 Strength of materials and parts >10.2.7 Inscriptions
10.3 Degree of protection of ASSEMBLIES	11 W
10.4 Clearances and creepage distances
10.5 Protection against electric shock	11 W
10.6 Incorporation of switching devices and components	-25 °C
10.7 Internal electrical circuits and connections	+55 °C
10.8 Connections for external conductors
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Meets the product standard´s requirements.
10.12 Electromagnetic compatibility	Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function	Does not apply, since the entire switchgear needs to be evaluated.
Supply voltage AC 50 Hz	Meets the product standard´s requirements.
Supply voltage AC 60 Hz	Meets the product standard´s requirements.
Supply voltage DC	Meets the product standard´s requirements.
Voltage type of supply voltage	Does not apply, since the entire switchgear needs to be evaluated.
Switching current	Does not apply, since the entire switchgear needs to be evaluated.
Number of analogue inputs	Is the panel builder´s responsibility.
Number of analogue outputs	Is the panel builder´s responsibility.
Number of digital inputs	Is the panel builder´s responsibility.
Number of digital outputs	Is the panel builder´s responsibility.
With relay output	Is the panel builder´s responsibility.
Number of HW-interfaces industrial Ethernet	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Number of interfaces PROFINET	Is the panel builder´s responsibility.
Number of HW-interfaces RS-232	Is the panel builder´s responsibility.
Number of HW-interfaces RS-422	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Number of HW-interfaces RS-485
Number of HW-interfaces serial TTY
Number of HW-interfaces USB	85 - 264 V
Number of HW-interfaces parallel	85 - 264 V
Number of HW-interfaces Wireless	85 - 264 V
Number of HW-interfaces other	AC/DC
With optical interface	5 A
Supporting protocol for TCP/IP	0
Supporting protocol for PROFIBUS	0
Supporting protocol for CAN	8
Supporting protocol for INTERBUS	8
Supporting protocol for ASI	Yes
Supporting protocol for KNX	0
Supporting protocol for MODBUS	0
Supporting protocol for Data-Highway	0
Supporting protocol for DeviceNet	0
Supporting protocol for SUCONET	0
Supporting protocol for LON	0
Supporting protocol for PROFINET IO	0
Supporting protocol for PROFINET CBA	0
Supporting protocol for SERCOS	0
Supporting protocol for Foundation Fieldbus	2
Supporting protocol for EtherNet/IP	No
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	No
Radio standard Bluetooth	No
Radio standard WLAN 802.11	No
Radio standard GPRS	No
Radio standard GSM	No
Radio standard UMTS	No
IO link master	No
Redundancy	No
With display	No
Degree of protection (IP)	No
Basic device	No
Expandable	No
Expansion device	No
With timer	No
Rail mounting possible	No
Wall mounting/direct mounting	No
Front build in possible	No
Rack-assembly possible	No
Suitable for safety functions	No
Category according to EN 954-1	No
SIL according to IEC 61508	No
Performance level acc. EN ISO 13849-1	No
Appendant operation agent (Ex ia)	No
Appendant operation agent (Ex ib)	No
Explosion safety category for gas	No
Explosion safety category for dust	IP20
Width	No
Height	Yes
Depth	Yes
UL File No.	No
UL Category Control No.	Yes
North America Certification	Yes
Degree of Protection	No