Basic function |
DOL starters (complete devices) |
Basic device |
MSC |
Notes |
|
Connection technique |
Also suitable for motors with efficiency class IE3. IE3-ready devices are identified by the logo on their packaging. |
Connection to SmartWire-DT |
Screw terminals |
Motor rating [P] >AC-3 >380 V 400 V 415 V [P] |
no |
Motor rating [P] >AC-3 >500 V [P] |
|
Rated operational current >AC-3 >380 V 400 V 415 V [Ie] |
11 kW |
Rated operational current >AC-3 >500 V [Ie
] |
15 kW |
Setting range of overload releases [Ir] |
21.7 A |
Coordination |
23.4 A |
Contact sequence |
|
Actuating voltage |
8 - 32 A |
Motor-protective circuit-breakers |
Type of coordination “1” Type of coordination “2” |
Contactor
|
|
DOL starter wiring set
Mechanical connection element and electrical electric contact module |
24 V DC |
Standards |
DC |
Altitude |
PKE32/XTU-32 Type |
Ambient temperature |
DILM25-10(...) Part no. |
Rated impulse withstand voltage [Uimp] |
PKZM0-XDM32ME Type |
Overvoltage category/pollution degree |
|
Rated operational voltage [Ue] |
IEC/EN 60947-4-1, VDE 0660 |
AC-4 cycle operation >Minimum current flow times |
Max. 2000 m |
AC-4 cycle operation >Minimum cut-out periods |
-25 - +55 |
AC-4 cycle operation >Note |
|
Motor protective circuit breaker PKZM0, PKE |
6000 V AC |
Operating ambient temperature min. |
III/3 |
Operating ambient temperature max. |
230 - 415 V |
Kind of motor starter |
500 (Class 5) 700 (Class 10) 900 (Class 15) 1000 (Class 20) ms |
With short-circuit release |
500 ms |
Rated control supply voltage Us at AC 50HZ |
In AC-4 cycle operation, going below the minimum current flow time can cause overheating of the load (motor). For all combinations with an SWD activation, you need not adhere to the minimum current flow times and minimum cut-out periods. ms |
Rated control supply voltage Us at AC 60HZ |
|
Rated control supply voltage Us at DC |
PKZM0 motor-protective circuit-breakers, see motor-protective circuit-breakers/PKZM0 product group DILM contactors, see contactor product group DILET timing relay, ETR, see contactors, electronic timing relays product group |
Voltage type for actuating |
-25 °C |
Rated operation power at AC-3, 230 V, 3-phase |
+55 °C |
Rated operation power at AC-3, 400 V |
|
Rated power, 460 V, 60 Hz, 3-phase |
|
Rated power, 575 V, 60 Hz, 3-phase |
Direct starter |
Rated operation current Ie |
Yes |
Rated operation current at AC-3, 400 V |
0 - 0 V |
Overload release current setting |
0 - 0 V |
Rated conditional short-circuit current, type 1, 480 Y/277 V |
24 - 24 V |
Rated conditional short-circuit current, type 1, 600 Y/347 V |
DC |
Rated conditional short-circuit current, type 2, 230 V |
5.5 kW |
Rated conditional short-circuit current, type 2, 400 V |
12.5 kW |
Number of auxiliary contacts as normally open contact |
0 kW |
Number of auxiliary contacts as normally closed contact |
0 kW |
Ambient temperature, upper operating limit |
21.7 A |
Temperature compensated overload protection |
25 A |
Release class |
8 - 32 A |
Type of electrical connection of main circuit |
0 A |
Type of electrical connection for auxiliary- and control current circuit |
0 A |
Rail mounting possible |
100000 A |
With transformer |
100000 A |
Number of command positions |
1 |
Suitable for emergency stop |
0 |
Coordination class according to IEC 60947-4-3 |
60 °C |
Number of indicator lights |
Yes |
External reset possible |
Adjustable |
With fuse |
Screw connection |
Degree of protection (IP) |
Screw connection |
Degree of protection (NEMA) |
Yes |
Supporting protocol for TCP/IP |
No |
Supporting protocol for PROFIBUS |
|
Supporting protocol for CAN |
No |
Supporting protocol for INTERBUS |
|
Supporting protocol for ASI |
|
Supporting protocol for MODBUS |
No |
Supporting protocol for Data-Highway |
No |
Supporting protocol for DeviceNet |
IP20 |
Supporting protocol for SUCONET |
Other |
Supporting protocol for LON |
No |
Supporting protocol for PROFINET IO |
No |
Supporting protocol for PROFINET CBA |
No |
Supporting protocol for SERCOS |
No |
Supporting protocol for Foundation Fieldbus |
No |
Supporting protocol for EtherNet/IP |
No |
Supporting protocol for AS-Interface Safety at Work |
No |
Supporting protocol for DeviceNet Safety |
No |
Supporting protocol for INTERBUS-Safety |
No |
Supporting protocol for PROFIsafe |
No |
Supporting protocol for SafetyBUS p |
No |
Supporting protocol for other bus systems |
No |
Width |
No |
Height |
No |
Depth |
No |
North America Certification |
No |