SKU: Eaton-191090
SWD module for 3-way hydraulic valve IP65
SmartWire-DT devices in protection category IP65 for connection of a hydraulic three-way switch valve. Primary valve connection as per DIN EN 175301-803, connection to second valve coil with M12 connector (A-coded, 4-pin). Automatic address setting, digital outputs 24 V DC 1.6/1.3 A (60/70 °C) and short-circuit protection
| Product range | SmartWire-DT slave |
| Basic function | Digital modules |
| Function | For connecting digital 3-way switching valves |
| Short Description | with supply |
| Connection to SmartWire-DT | yes |
| Standards | IEC/EN 61131-2 EN 50178_x |
| Approvals >Approvals |
UL |
| Dimensions (W x H x D) | 44.7 x 77.4 x 51.9 mm |
| Weight | 0.09 kg |
| Mounting | Can be screwed onto valve connector in conformity with DIN EN 175301-803 |
| Mounting position | As required |
| Power supply >Power loss [P] |
2.5 W |
| Air pressure (operation) | 795 - 1080 hPa |
| Ambient temperature >Operation [ϑ] |
-25 - +70 (observe derating) °C |
| Ambient temperature >Storage / Transport [ϑ] |
-40 - +85 °C |
| Relative humidity >Condensation |
permissible |
| Relative humidity >Relative humidity, non-condensing (IEC/EN 60068-2-30) |
5 - 95 % |
| Protection type (IEC/EN 60529, EN50178, VBG 4) | IP65 |
| Vibrations (IEC/EN 61131-2:2008) >Constant amplitude 3,5 mm |
5 - 8.4 Hz |
| Vibrations (IEC/EN 61131-2:2008) >Constant acceleration 1 g |
8.4 - 150 Hz |
| Mechanical shock resistance (IEC/EN 60068-2-27) semi-sinusoidal 30 g/11 ms | 9 Impacts |
| Drop to IEC/EN 60068-2-31 [Drop height] | 50 mm |
| Free fall, packaged (IEC/EN 60068-2-32) | 0.3 m |
| Overvoltage category | II |
| Pollution degree | 3 |
| Electrostatic discharge (IEC/EN 61131-2:2008) >Air discharge (Level 3) |
8 kV |
| Electrostatic discharge (IEC/EN 61131-2:2008) >Contact discharge (Level 2) |
4 kV |
| Electromagnetic fields (IEC/EN 61131-2:2008) >80 - 1000 MHz |
10 V/m |
| Electromagnetic fields (IEC/EN 61131-2:2008) >1.4 - 2 GHz |
3 V/m |
| Electromagnetic fields (IEC/EN 61131-2:2008) >2 - 2.7 GHz |
1 V/m |
| Radio interference suppression (SmartWire-DT) | EN 55011 Class A |
| Burst (IEC/EN 61131-2:2008, Level 3) >Supply cable |
2 kV |
| Burst (IEC/EN 61131-2:2008, Level 3) >SmartWire-DT cables |
1 kV |
| Surge (IEC/EN 61131-2:2008, Level 1) >Surge power cables |
1 kV |
| Radiated RFI (IEC/EN 61131-2:2008, Level 3) | 10 V |
| Station type | SmartWire-DT slave |
| Setting the baud rate | automatic |
| Baud rate (data transfer speed) | maximum125/250/500/1000/2000 kbps |
| Status SmartWire-DT | Green LED |
| SWD-IN | M12 plug (A-keyed), 5 pole |
| SWD-OUT | M12 plug (A-keyed), 5 pole |
| Current consumption (24V, without sensor and without I/O supply) >Current consumption (24 V SWD supply) |
50 mA |
| Sensor supply >Overload and short-circuit proof |
yes, with diagnostics |
| Terminal for I/O sensor >Connection type |
DIN-A valve connector, M12 socket (A-keyed), 4 pole |
| Quantity | 2 |
| Output current | 1.6 (at 60°C), 1.3 (at 70°C) A |
| Overload proof | yes, with diagnostics |
| Maximum switching frequency | 1 Hz |
| Status display outputs | yellow LED |
| Rated operational voltage [UAux] | 24 V DC (-15/+20%) V |
| Permissible range | 20.4 - 28.8 V DC |
| Siemens MPI, (optional) | yes |
| Short-circuit rating | Not relevant |
| Potential isolation | Galvanically isolated from the SmartWire-DT network |
| Outputs to SmartWire-DT | Yes |
| Rated operational current for specified heat dissipation [In] | 1.6 A |
| Equipment heat dissipation, current-dependent [Pvid] | 1 W |
| Static heat dissipation, non-current-dependent [Pvs] | 1.5 W |
| Operating ambient temperature min. | -25 °C |
| Operating ambient temperature max. | +70 °C |
| Degree of Protection | IP65 |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
| 10.2 Strength of materials and parts >10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated. |
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
| 10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
| 10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
| 10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
| 10.7 Internal electrical circuits and connections | Is the panel builder´s responsibility. |
| 10.8 Connections for external conductors | Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Is the panel builder´s responsibility. |
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
| 10.10 Temperature rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| 10.11 Short-circuit rating | Is the panel builder´s responsibility. |
| 10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
| 10.13 Mechanical function | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| UL File No. | E205091 |
| North America Certification | UL listed |
| Specially designed for North America | No |
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024