Ürün Açıklaması

User interface with PLC as an SWD coordinator,24VDC,10.1-inch PCT display,1024x600 pixels,2xEthernet, 1xRS232,1xRS485,1xCAN,1xSWD,1xProfibus,1xSD slot
SWD multi-touch display with PLC, XV-303, Product range: XV300 10.1", Subrange: SmartWire-DT touch display with integrated controller (HMI PLC), Function: SmartWire-DT coordinator, Description: XV300 multi touch display with PLC function for flush mounting plates, Control panel with PLC as a SmartWire-DT coordinator with PROFIBUS and 2nd Ethernet port, Common features of the model series: Ethernet interface, CAN, USB device, USB Host, RS232, RS485, Slot for SD card, Operating System Windows Embedded Compact 7 pro, Integrated Runtime visualization software license, Display - Type: Color display, TFT, anti-glare, Touch-technology: Capacitive multi-touch technology (PCT), Number of colours: 16777216 (Color depth 24 bit), Resolution: WSVGA, 1024 x 600 Pixel, Portrait format: yes, Screen diagonal: 10.1, widescreen Inch, Plastic enclosure and glass panel in plastic frame, Operating system: Windows Embedded Compact 7 Pro, PLC-licence: PLC licence inclusive, License certificates for onboard interfaces: Not required, built-in interfaces: 2 x Ethernet 10/100 Mbps, 1 x RS232, 1 x RS485, 1 x USB host 2.0, 1 x USB device, 1 x CANopen®/easyNet, 1 x PROFIBUS/MPI, 1 x SmartWire-DT, Front type: Anti-glare tempered glass in plastic bezel, Utilization: Flush mounting, Slots: for SD card: 1, Memory card automation: Optionally with SD card -> article no. 181638, Pluggable communication cards (optional): no, Touch sensor: Multi-touch touch panel, Heat dissipation: 18 W, Connection to SmartWire-DT: yes, Degree of protection (IEC/EN 60529, EN50178, VBG 4): IP65 (in the front as per EN 60529-1), IP20 (on rear as per EN 60529-1), NEMA 4X, NEMA12 (as per NEMA 250-2003)

Product range	XV300 10.1"
Product range	XV-303
Subrange	SmartWire-DT touch display with integrated controller (HMI PLC)
Function	SmartWire-DT coordinator
Description	XV300 multi touch display with PLC function for flush mounting plates
Description	Control panel with PLC as a SmartWire-DT coordinator with PROFIBUS and 2nd Ethernet port
Common features of the model series	Ethernet interface CAN USB device USB Host RS232 RS485 Slot for SD card Operating System Windows Embedded Compact 7 pro Integrated Runtime visualization software license
Display - Type	Color display, TFT, anti-glare
Touch-technology	Capacitive multi-touch technology (PCT)
Number of colours	16777216 (Color depth 24 bit)
Resolution	WSVGA 1024 x 600 Pixel
Portrait format	yes
Screen diagonal	10.1 widescreen Inch
Model	Plastic enclosure and glass panel in plastic frame
Operating system	Windows Embedded Compact 7 Pro
PLC-licence	PLC licence inclusive
License certificates for onboard interfaces	Not required
built-in interfaces	2 x Ethernet 10/100 Mbps 1 x RS232 1 x RS485 1 x USB host 2.0 1 x USB device 1 x CANopen®/easyNet 1 x PROFIBUS/MPI 1 x SmartWire-DT
Front type	Anti-glare tempered glass in plastic bezel
Utilization	Flush mounting
Slots	for SD card: 1
Memory card automation	Optionally with SD card -> article no. 181638
Pluggable communication cards (optional)	no
Touch sensor	Multi-touch touch panel
Heat dissipation	18 W
Connection to SmartWire-DT	yes
Display - Type	Color display, TFT, anti-glare
Screen diagonal	10.1 widescreen Inch
Resolution	WSVGA 1024 x 600 Pixel
Visible screen area	222.72 x 125.28 mm
Format	16:9
Number of colours	16777216 (Color depth 24 bit)
Contrast ratio (Normally)	Normally 500:1
Brightness	Normally 400 cd/m2
Back-lighting	LED dimmable via software
Service life of back-lighting	Normally 50000 h
Technology	Projected Capacitive Touch (PCT)
Touch sensor	Multi-touch touch panel
Processor	ARM Cortex-A9 800 MHz
Internal memory	DRAM: 512 MB RAM Flash: 1GB SLC NVRAM: 128kB Retain
External memory	SD card, Type: SDSC, SDHC
Cooling	Fanless CPU and system cooling, natural convection-based passive cooling
Back-up of real-time clock >Battery (service life)	non-replaceable, BR2330 soldered in
Back-up of real-time clock >Backup (time at zero voltage)	Normally 10 years
Visualisation software	GALILEO XSOFT-CODESYS
PLC-Programming software	XSOFT-CODESYS-2 XSOFT-CODESYS-3
Target and web visualization	Yes
PLC-licence	PLC licence inclusive
Operating system	Windows Embedded Compact 7 Pro
built-in interfaces	2 x Ethernet 10/100 Mbps 1 x RS232 1 x RS485 1 x USB host 2.0 1 x USB device 1 x CANopen®/easyNet 1 x PROFIBUS/MPI 1 x SmartWire-DT
USB Host	USB 2.0, not galvanically isolated
USB device	USB 2.0, not galvanically isolated
RS-232	Not galvanically isolated, 9-pin D-sub plug, UNC
RS-485	Not galvanically isolated, 9-pin D-sub plug, UNC
CAN	Not galvanically isolated, 9-pin D-sub plug, UNC
Profibus	PROFIBUS-DP, not galvanically isolated, 9 pole SUB-D socket, UNC
Slots	for SD card: 1
SmartWire-DT master	Yes
Ethernet	10/100 Mbps
MPI	Yes
Nominal voltage	24 V DC SELV (safety extra low voltage)
permissible voltage	Effective: 19.2-30.0 V DC (rated operating voltage -20%/+25%) Absolute with ripple: 18,0-31,2 V DC Battery powered: 18,0-31,2 V DC (rated operating voltage -25%/+30%) 35 V DC for a duration of < 100 ms
Voltage dips	≤ 10 ms from rated voltage (24 V DC) 5 ms from undervoltage (19.2 V DC) ms
Power consumption [Pmax.]	18 W
Power consumption	Normally 18 W
Heat dissipation	18 W
Note on heat dissipation	Heat dissipation with power consumption for 24 V 12 W for basic device + 2.5 W for USB module
Siemens MPI, (optional)	yes
Type of fuse	Yes (fuse not accessible)
Potential isolation	no
Housing material	Insulated material black
Front type	Anti-glare tempered glass in plastic bezel
Dimensions (W x H x D)	269 x 174 x 58 mm
flush mounted	Clearance: W x H x D ≥ 30 mm (1.18") Inclination from vertical: ±45° (if using natural convection)
Weight	1.13 kg
Degree of protection (IEC/EN 60529, EN50178, VBG 4)	IP65 (in the front as per EN 60529-1), IP20 (on rear as per EN 60529-1) NEMA 4X NEMA12 (as per NEMA 250-2003)
Approvals >Approvals	cUL 61010-2-201
Approvals >shipping classification	DNV GL
Approvals
Applied standards and directives >EMC	2004/108/EEC
Applied standards and directives >Emitted interference	IEC/EN 61000-6-4
Applied standards and directives >Interference immunity	IEC/EN 61000-6-2
Applied standards and directives >Product standards	EN50178/IEC/EN 61131-2
Mechanical shock resistance	15g / 11ms g
Vibration	5...9 Hz +- 3.5 mm 9...60 Hz +- 0.15 mm 60…150 Hz ± 2 g
Free fall, packaged	IEC/EN 60068-2-31 m
RoHS	conform
Climatic environmental conditions >Climatic proofing	Cold to EN 60068-2-1 Dry heat to IEC 60068-2-2 Damp heat as per EN 60068-2-3
Climatic environmental conditions >Air pressure (operation)	795 - 1080 hPa
Temperature >Storage / Transport [ϑ]	-20 - +60 °C
Temperature >Operating ambient temperature min.	0 °C
Temperature >Operating ambient temperature max.	+50 °C
Relative humidity >Condensation	Non-condensing
Relative humidity >Relative humidity	10 - 95%, non-condensing
Rated operational voltage [UAux]	24 V DC (-15/+20%) V
Residual ripple on the input voltage	≦ 5 %
Protection against polarity reversal	Yes
Max. current [Imax]	3 A
Note	If contactors with a total power consumption > 3 A are connected, a power feeder module EU5C-SWD-PF1/2 has to be used.
Short-circuit rating	no, external fuse FAZ Z3
Potential isolation	No
Rated operating voltage of 24-V-DC slaves	typ. UAux - 0.2 V
Supply voltage [UPow]	24 DC -15 % + 20 % V
Input voltage ripple	≦ 5 %
Siemens MPI, (optional)	yes
Rated current [I]	0.7 A
Overload proof	yes
Inrush current and duration	12.5 A/6 ms A
Heat dissipation at 24 V DC	1.0 W
Potential isolation between UPow and 15 V SmartWire-DT supply voltage	No
Bridging voltage dips	10 ms
Repetition rate	1 s
Status indication	yes LED
Rated operating voltage [Ue]	14.5 ± 3 % V
max. current [Imax]	0.7 A
Note	If SmartWire-DT modules with a total power consumption > 0.7 A are connected, a power feeder module EU5C-SWD-PF2 has to be used.
Short-circuit rating	Yes
Connection type	Push in terminals
Solid	0.2 - 1.5 mm2
Flexible with ferrule	0.25 - 1.5 mm2
UL/CSA solid or stranded	24 - 16 AWG
Station type	SmartWire-DT master
Number of SmartWire-DT slaves	99
Baud Rates	125 250 kBd
Address allocation	automatic
Status indication	SmartWire-DT master LED: red/green Configurations LED: red/green LED
Connections	Plug, 8-pole
Plug connectors	Blade terminal SWD4-8MF2
Rated operational current for specified heat dissipation [In]	0 A
Heat dissipation per pole, current-dependent [Pvid]	0 W
Equipment heat dissipation, current-dependent [Pvid]	0 W
Static heat dissipation, non-current-dependent [Pvs]	18 W
Heat dissipation capacity [Pdiss]	0 W
Operating ambient temperature min.	0 °C
Operating ambient temperature max.	+50 °C
Degree of Protection	IP65 (in the front as per EN 60529-1), IP20 (on rear as per EN 60529-1) NEMA 4X
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Please enquire
10.2 Strength of materials and parts >10.2.5 Lifting	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Is the panel builder´s responsibility.
10.8 Connections for external conductors	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Supply voltage AC 50 Hz	0 - 0 V
Supply voltage AC 60 Hz	0 - 0 V
Supply voltage DC	19.2 - 30 V
Voltage type of supply voltage	DC
Number of HW-interfaces industrial Ethernet	2
Number of interfaces PROFINET	0
Number of HW-interfaces RS-232	1
Number of HW-interfaces RS-422	0
Number of HW-interfaces RS-485	1
Number of HW-interfaces serial TTY	0
Number of HW-interfaces USB	2
Number of HW-interfaces parallel	0
Number of HW-interfaces Wireless	0
Number of HW-interfaces other	3
With SW interfaces	Yes
Supporting protocol for TCP/IP	Yes
Supporting protocol for PROFIBUS	Yes
Supporting protocol for CAN	Yes
Supporting protocol for INTERBUS	No
Supporting protocol for ASI	No
Supporting protocol for KNX	No
Supporting protocol for MODBUS	Yes
Supporting protocol for Data-Highway	No
Supporting protocol for DeviceNet	No
Supporting protocol for SUCONET	No
Supporting protocol for LON	No
Supporting protocol for PROFINET IO	No
Supporting protocol for PROFINET CBA	No
Supporting protocol for SERCOS	No
Supporting protocol for Foundation Fieldbus	No
Supporting protocol for EtherNet/IP	Yes
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	Yes
Radio standard Bluetooth	No
Radio standard WLAN 802.11	No
Radio standard GPRS	No
Radio standard GSM	No
Radio standard UMTS	No
IO link master	No
Type of display	TFT
With colour display	Yes
Number of colours of the display	16777216
Number of grey-scales/blue-scales of display	0
Screen diagonal	10.1 inch
Number of pixels, horizontal	1024
Number of pixels, vertical	600
Useful project memory/user memory	512000 kByte
With numeric keyboard	No
With alpha numeric keyboard	No
Number of function buttons, programmable	0
Number of buttons with LED	0
Number of system buttons	1
Touch technology	Capacitive multitouch
With message indication	Yes
With message system (incl. buffer and confirmation)	Yes
Process value representation (output) possible	Yes
Process default value (input) possible	Yes
With recipes	Yes
Number of password levels	200
With printer output	Yes
Number of online languages	100
Additional software components, loadable	Yes
Degree of protection (IP), front side	IP65
Degree of protection (NEMA), front side	12
Operation temperature	0 - 50 °C
Rail mounting possible	No
Wall mounting/direct mounting	No
Suitable for safety functions	No
Width of the front	269 mm
Height of the front	174 mm
Built-in depth	50.1 mm
Product Standards	UL 61010-2-201; IEC/EN 61131-2; CE
UL File No.	E205091
North America Certification	UL listed, certified by UL for use in Canada
Specially designed for North America	No
Current Limiting Circuit-Breaker	No
Degree of Protection	IEC: IP65, NA: NEMA4X, NEMA12