SKU: Eaton-177365
Variable speed starter, Rated operational voltage 400 V AC, 3-phase, Ie 1.3 A, 0.37 kW, 0.5 HP
Variable speed starters, Part group reference (e.g. DIL): DE1, Rated operational voltage: Ue = 400 V AC, 3-phase, 480 V AC, 3-phase, Output voltage with Ve: U2 = 400 V AC, 3-phase, 480 V AC, 3-phase, Mains voltage (50/60Hz): ULN = 380 (-10%) - 480 (+10%) V, Rated operational current At 150% overload: Ie = 1.3 A, Note: Rated operational current at an operating frequency of 16 kHz and an ambient air temperature of +50 °C, Note: Overload cycle for 60 s every 600 s, Assigned motor rating Note: for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm-1 at 50 Hz or 1800 min-1 at 60 Hz, Overload cycle for 60 s every 600 s, at 400 V, 50 Hz, Assigned motor rating 150 % Overload: P = 0.37 kW, 150 % Overload: IM = 1.1 A, Assigned motor rating Note: at 440 - 480 V, 60 Hz, Assigned motor rating 150 % Overload: P = 0.5 HP, Assigned motor rating 150 % Overload: IM = 1.1 A, Degree of Protection: IP20/NEMA 0, Interface/field bus (built-in): OP-Bus (RS485)/Modbus RTU, Frame size: FS1, Standards: Specification for general requirements: IEC/EN 61800-2, EMC requirements: IEC/EN 61800-3, Safety requirements: IEC/EN 61800-5-1
Product range | Variable speed starter |
Part group reference (e.g. DIL) | DE1 |
Rated operational voltage [Ue] | 400 V AC, 3-phase 480 V AC, 3-phase |
Output voltage with Ve [U2] | 400 V AC, 3-phase 480 V AC, 3-phase |
Mains voltage (50/60Hz) [ULN] | 380 (-10%) - 480 (+10%) V |
At 150% overload [Ie] | |
Note | 1.3 A |
Note | Rated operational current at an operating frequency of 16 kHz and an ambient air temperature of +50 °C |
Note | |
Note | for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm-1 at 50 Hz or 1800 min-1 at 60 Hz |
150 % Overload [P] | Overload cycle for 60 s every 600 s |
150 % Overload [IM] | at 400 V, 50 Hz |
Note | 0.37 kW |
150 % Overload [P] | 1.1 A |
150 % Overload [IM] | at 440 - 480 V, 60 Hz |
Degree of Protection | 0.5 HP |
Interface/field bus (built-in) | 1.1 A |
Parameterization | IP20/NEMA0 |
Frame size | OP-Bus (RS485)/Modbus RTU |
Connection to SmartWire-DT | Keypad Fieldbus drivesConnect drivesConnect mobile (App) |
Standards | FS1 |
Certifications | yes in conjunction with DX-NET-SWD3 SmartWire DT module |
Production quality | |
Climatic proofing [ρw] | Specification for general requirements: IEC/EN 61800-2 EMC requirements: IEC/EN 61800-3 Safety requirements: IEC/EN 61800-5-1 |
Ambient temperature >Operating ambient temperature min. |
CE, UL, cUL, RCM |
Ambient temperature >Operating ambient temperature max. |
RoHS, ISO 9001 |
Ambient temperature | < 95%, average relative humidity (RH), non-condensing, non-corrosive % |
Ambient temperature >Storage [ϑ] |
-10 °C |
Radio interference level >Radio interference class (EMC) |
+60 °C |
Radio interference level >Environment (EMC) |
operation (150 % overload); max. +60 °C |
Radio interference level >maximum motor cable length [I] |
-40 - +70 °C |
Mechanical shock resistance | C2, C3, depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary. |
Vibration | 1st and 2nd environments as per EN 61800-3 |
Altitude | C2 ≤ 10 m C3 ≤ 25 m m |
Degree of Protection | 15 (11 m/s, EN 60068-2-27) g |
Protection against direct contact | EN 61800-5-1 |
Supply >Rated operational voltage [Ue] |
0 - 1000 m above sea level Above 1000 m: 1% derating for every 100 m max. 2000 m m |
Supply >Mains voltage (50/60Hz) [ULN] |
IP20/NEMA0 |
Supply >Input current (150% overload) [ILN] |
BGV A3 (VBG4, finger- and back-of-hand proof) |
Supply >Supply frequency [fLN] |
|
Supply >Frequency range [fLN] |
400 V AC, 3-phase 480 V AC, 3-phase |
Supply >Mains switch-on frequency |
380 (-10%) - 480 (+10%) V |
Power section >Overload current (150% overload) [IL] |
1.7 A |
Power section >max. starting current (High Overload) [IH] |
50/60 Hz |
Power section >Note about max. starting current |
45–66 (± 0%) Hz |
Power section >Output voltage with Ve [U2] |
Maximum of one time every 30 seconds |
Power section >Output Frequency [f2] |
1.95 A |
Power section >Switching frequency [fPWM] |
200 % |
Power section >Operation Mode |
for 1.875 seconds every 600 seconds |
Power section >Frequency resolution (setpoint value) [Δf] |
400 V AC, 3-phase 480 V AC, 3-phase |
Power section >Rated operational current >At 150% overload [Ie] |
0 - 50/60 (max. 300) Hz |
Power section >Note |
16 adjustable 4 - 32 (audible) kHz |
Power section >Maximum leakage current to ground (PE) without motor [IPE] |
U/f control Speed control with slip compensation |
Power section >Frame size |
0.025 Hz |
Motor feeder >Note |
1.3 A |
Motor feeder >Note |
Rated operational current at an operating frequency of 16 kHz and an ambient air temperature of +50 °C |
Motor feeder >Note |
< 3.5 AC, < 10 DC mA |
Motor feeder >150 % Overload [P] |
FS1 |
Motor feeder >Note |
for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm-1 at 50 Hz or 1800 min-1 at 60 Hz |
Motor feeder >150 % Overload [P] |
Overload cycle for 60 s every 600 s |
Motor feeder >Apparent power >Apparent power at rated operation 400 V [S] |
at 400 V, 50 Hz |
Motor feeder >Apparent power >Apparent power at rated operation 480 V [S] |
0.37 kW |
Motor feeder >Braking function >Standard braking torque |
at 440 - 480 V, 60 Hz |
Motor feeder >Braking function >DC braking torque |
0.5 HP |
Reference voltage [Us] | 0.9 kVA |
Analog inputs | 1.08 kVA |
Digital inputs | max. 30 % MN |
Relay outputs | adjustable to 100 % |
Interface/field bus (built-in) | |
Power Wiring >Safety device (fuse or miniature circuit-breaker) >IEC (Type B, gG), 150 % |
10 V DC (max. 0.2 mA) V |
Power Wiring >Safety device (fuse or miniature circuit-breaker) >UL (Class CC or J) |
1, parameterizable, 0 - 10 V DC, 0/4 - 20 mA |
Power Wiring >Mains contactor >150 % overload (CT/IH, at 50 °C) |
4, parameterizable, 10 - 30 V DC |
Power Wiring >Main choke >150 % overload (CT/IH, at 50 °C) |
1, N/O contact, 6 A (250 V, AC-1) / 5 A (30 V, DC-1) |
Power Wiring >Radio interference suppression filter (external, 150 %) |
OP-Bus (RS485)/Modbus RTU |
Power Wiring >Radio interference suppression filter, low leakage currents (external, 150 %) |
|
Power Wiring >Note regarding radio interference suppression filter |
FAZ-B6/3 |
Motor feeder >motor choke >150 % overload (CT/IH, at 50 °C) |
6 A |
Rated operational current for specified heat dissipation [In] | DILM7-… |
Heat dissipation per pole, current-dependent [Pvid] | DX-LN3-004 |
Equipment heat dissipation, current-dependent [Pvid] | DX-EMC34-008 |
Static heat dissipation, non-current-dependent [Pvs] | DX-EMC34-008-L |
Heat dissipation capacity [Pdiss] | Optional external radio interference suppression filter for longer motor cable lengths and for use in different EMC environments |
Operating ambient temperature min. | DX-LM3-008 |
Operating ambient temperature max. | |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
1.3 A |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
0 W |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
18 W |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
0 W |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
0 W |
10.2 Strength of materials and parts >10.2.5 Lifting |
-10 °C |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
+60 °C |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
Operation (with 150 % overload) |
10.3 Degree of protection of ASSEMBLIES | |
10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
10.5 Protection against electric shock | Meets the product standard´s requirements. |
10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
10.8 Connections for external conductors | Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
10.10 Temperature rise | Does not apply, since the entire switchgear needs to be evaluated. |
10.11 Short-circuit rating | Meets the product standard´s requirements. |
10.12 Electromagnetic compatibility | Does not apply, since the entire switchgear needs to be evaluated. |
10.13 Mechanical function | Does not apply, since the entire switchgear needs to be evaluated. |
Mains voltage | Is the panel builder´s responsibility. |
Mains frequency | Is the panel builder´s responsibility. |
Number of phases input | Is the panel builder´s responsibility. |
Number of phases output | Is the panel builder´s responsibility. |
Max. output frequency | Is the panel builder´s responsibility. |
Max. output voltage | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
Nominal output current I2N | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Max. output at quadratic load at rated output voltage | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Max. output at linear load at rated output voltage | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Relative symmetric net frequency tolerance | |
Relative symmetric net voltage tolerance | |
Number of analogue outputs | 342 - 528 V |
Number of analogue inputs | 50/60 Hz |
Number of digital outputs | 3 |
Number of digital inputs | 3 |
With control unit | 300 Hz |
Application in industrial area permitted | 500 V |
Application in domestic- and commercial area permitted | 1.3 A |
Supporting protocol for TCP/IP | 0.5 kW |
Supporting protocol for PROFIBUS | 0.5 kW |
Supporting protocol for CAN | 10 % |
Supporting protocol for INTERBUS | 10 % |
Supporting protocol for ASI | 0 |
Supporting protocol for KNX | 1 |
Supporting protocol for MODBUS | 0 |
Supporting protocol for Data-Highway | 4 |
Supporting protocol for DeviceNet | No |
Supporting protocol for SUCONET | Yes |
Supporting protocol for LON | No |
Supporting protocol for PROFINET IO | No |
Supporting protocol for PROFINET CBA | No |
Supporting protocol for SERCOS | No |
Supporting protocol for Foundation Fieldbus | No |
Supporting protocol for EtherNet/IP | No |
Supporting protocol for AS-Interface Safety at Work | No |
Supporting protocol for DeviceNet Safety | Yes |
Supporting protocol for INTERBUS-Safety | No |
Supporting protocol for PROFIsafe | No |
Supporting protocol for SafetyBUS p | No |
Supporting protocol for BACnet | No |
Supporting protocol for other bus systems | No |
Number of HW-interfaces industrial Ethernet | No |
Number of interfaces PROFINET | No |
Number of HW-interfaces RS-232 | No |
Number of HW-interfaces RS-422 | Yes |
Number of HW-interfaces RS-485 | No |
Number of HW-interfaces serial TTY | No |
Number of HW-interfaces USB | No |
Number of HW-interfaces parallel | No |
Number of HW-interfaces other | No |
With optical interface | No |
With PC connection | Yes |
Integrated breaking resistance | 0 |
4-quadrant operation possible | 0 |
Type of converter | 0 |
Degree of protection (IP) | 0 |
Degree of protection (NEMA) | 1 |
Height | 0 |
Width | 0 |
Depth | 0 |
Product Standards | 0 |
UL File No. | No |
UL Category Control No. | Yes |
CSA File No. | No |
North America Certification | No |
Specially designed for North America | U converter |
Suitable for | IP20 |
Max. Voltage Rating | Other |
Degree of Protection | 230 mm |