SKU: Eaton-177069
Mini compact distribution board, 1-row 5 SU, IP20
Plastic mini compact distribution board, for installing switching and protective devices, in accordance with dimension standard DIN 43 880, with an installation depth of 70 mm and a current of up to 63 A, 400 V /50 Hz, IP20 degree of protection to IEC/EN 62208, approved for building service distribution boards in accordance with IEC/EN 61439-3 VDE 0660-600-3, for surface mounting, top with 46-mm device opening, sealable as standard, white base and cover with screw closure, knockout for metric cable entries on top, bottom, and back, protection Class II, 5 space units.
Basic function | Basic device |
Product function | Installation distribution boards |
Product range | MINI DBO |
Design | Surface mounted |
Installation site | Indoor |
Type of installation | Surface mounting |
Door/Flap | Without |
Degree of Protection | IP20 |
Colour | White |
Module rack | Single-rail |
Shroud for protection against accidental contact | Plastic |
Rows [Count] | 1 |
Module units per row | 5 |
Description | IP20 Protection Class II Plastic housing white (RAL 9003) |
Cable entries | Metric cable entries on top and bottom, side, back plate |
PE and N terminals design | Without |
Equipment supplied | Basic device |
Standards | IEC/EN 62208 |
RoHS (in accordance with Directive 2002/95/EC of the European Parliament and Council) | conform |
Ambient temperature | -5 - +40 °C |
Degree of Protection | IP20 |
Protection class | II (totally insulated) |
Rated operational voltage [Ue] | 400 V AC |
Rated frequency [f] | 50 Hz |
Material | ABS (plastic) |
Colour | white (RAL 9003) |
Mechanical >Impact resistance |
IK05 |
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890
>Individual enclosure for wall mounting [PV] |
11 W |
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890
>Individual enclosure for wall mounting [PV] |
13 W |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
650 °C; meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Not relevant to indoor installations. |
10.2 Strength of materials and parts >10.2.5 Lifting |
Does not apply to enclosures without lifting aids. |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
IK05 |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
10.3 Degree of protection of ASSEMBLIES | IP20 |
10.4 Clearances and creepage distances | Is the panel builder´s responsibility. |
10.5 Protection against electric shock | Protection class 2, therefore not applicable. |
10.6 Incorporation of switching devices and components | Is the panel builder´s responsibility. |
10.7 Internal electrical circuits and connections | Is the panel builder´s responsibility. |
10.8 Connections for external conductors | Is the panel builder´s responsibility. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Ui = 400 V AC |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
2.8 kV |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
10.10 Temperature rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
10.11 Short-circuit rating | Is the panel builder´s responsibility. |
10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
10.13 Mechanical function | Meets the product standard´s requirements. |
Mounting method | Surface mounted (plaster) |
Number of rows | 1 |
Width in number of modular spacings | 5 |
Type of cover | None |
Cover model | With notch |
Transparent cover/door | No |
Material housing | Plastic |
Height | 140 mm |
Width | 120 mm |
Depth | 66 mm |
Built-in depth | 70 mm |
Internal depth | 60 mm |
DIN-rail | Yes |
With mounting plate | No |
Extension possible | No |
EMC-version | Yes |
Colour | White |
RAL-number | 9003 |
Degree of protection (IP) | IP20 |
With lock | No |
Type of closure | Other |