SKU: Eaton-174706
SmartWire-DT splitter IP67, from M12 plug to two M8 sockets, 4-Pole, pin 2
SmartWire-DT splitter with IP67 degree of protection, M12 plug into two 4 pole M8 sockets with I/O signal on pin 2
Product range | SmartWire-DT accessories |
Basic function | Splitter |
Basic function accessories | Splitter |
Function | For splitting an M12 I/O connection´s I/O signals |
Description | Splitter with IP67 degree of protection, M12 plug into two 4 pole M8 sockets with I/O signal on pin 2 |
Connection to SmartWire-DT | yes |
For use with | EU1E-SWD… EU2E-SWD… |
Dimensions (W x H x D) | 31 x 46 x 16 mm |
Mounting position | As required |
Power loss [P] | 0 W |
Note on heat dissipation | not relevant |
Protection type (IEC/EN 60529, EN50178, VBG 4) | IP67 |
Climatic proofing | Dry heat to IEC 60068-2-2 Damp heat as per EN 60068-2-3 |
Air pressure (operation) | 795 - 1080 hPa |
Ambient temperature >Operation [ϑ] |
-25 - +90 °C |
Ambient temperature >Storage / Transport [ϑ] |
-40 - +90 °C |
Ambient temperature >Relative humidity >Condensation |
permissible |
Connection 1 | M12 plug (A-keyed) |
Connection 2 | 2 * M8 sockets, 4-pin, I/O on connection pin 2 |
Static heat dissipation, non-current-dependent [Pvs] | 0 W |
Heat dissipation capacity [Pdiss] | 0 W |
Operating ambient temperature min. | -25 °C |
Operating ambient temperature max. | +90 °C |
Degree of Protection | IP67 |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated. |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated. |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
10.5 Protection against electric shock | Does not apply, since the entire switchgear needs to be evaluated. |
10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
10.7 Internal electrical circuits and connections | Is the panel builder´s responsibility. |
10.8 Connections for external conductors | Is the panel builder´s responsibility. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Is the panel builder´s responsibility. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Is the panel builder´s responsibility. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
10.10 Temperature rise | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
10.11 Short-circuit rating | Is the panel builder´s responsibility. |
10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
10.13 Mechanical function | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Type of electrical accessory | Plug |
Type of mechanical accessory | Other |
North America Certification | UL listed, CSA certified |
Specially designed for North America | No |