SKU: Eaton-174615
EMC filter for frequency converter, 3-phase 520 V, 400 A
Description | three-phase low leakage current |
Mains voltage (50/60Hz) [ULN] | max. 520 + 10% V |
Rated operational current [Ie] | 400 A |
For use with | DA1 |
Degree of Protection | IP00 |
Connection type | Flat copper bar, PE stud |
Weight [m] | 12,9 kg |
Notes | Separate mounting |
Standards | |
Environmental conditions >Altitude |
EN 50178, IEC 61800-3, EN 61800-3 incl. A11 |
Degree of Protection | Up to 2000 m a.s.l.; observe derating at higher altitudes m |
Static heat dissipation, non-current-dependent [Pvs] | IP00 |
Operating ambient temperature min. | |
Operating ambient temperature max. | 0 W |
Degree of Protection | -25 °C |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
+50 °C |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
IP20 |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
|
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.5 Lifting |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
Meets the product standard´s requirements. |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
Meets the product standard´s requirements. |
10.3 Degree of protection of ASSEMBLIES | Does not apply, since the entire switchgear needs to be evaluated. |
10.4 Clearances and creepage distances | Does not apply, since the entire switchgear needs to be evaluated. |
10.5 Protection against electric shock | Meets the product standard´s requirements. |
10.6 Incorporation of switching devices and components | Does not apply, since the entire switchgear needs to be evaluated. |
10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
10.8 Connections for external conductors | Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Is the panel builder´s responsibility. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Is the panel builder´s responsibility. |
10.10 Temperature rise | Is the panel builder´s responsibility. |
10.11 Short-circuit rating | Is the panel builder´s responsibility. |
10.12 Electromagnetic compatibility | Is the panel builder´s responsibility. |
10.13 Mechanical function | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
Product Standards | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
UL File No. | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
North America Certification | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |