Ürün Açıklaması

Radio interference suppression filter, three-phase, low leakage current, ULN= max. 520 + 10% V, 100 A, For use with: DA1
Radio interference suppression filter, Description: three-phase, low leakage current, Mains voltage (50/60Hz): ULN= max. 520 + 10% V, Rated operational current: Ie= 100 A, For use with: DA1, Degree of Protection: IP20, Connection type: Screw terminal, PE stud, Weight: m 5,2 kg, Notes: Separate mounting, Standards: EN 50178, IEC 61800-3, EN 61800-3 incl. A11

Description	three-phase low leakage current
Mains voltage (50/60Hz) [ULN]	max. 520 + 10% V
Rated operational current [Ie]	100 A
For use with	DA1
Degree of Protection	IP20
Connection type	Screw terminal, PE stud
Weight [m]	5,2 kg
Notes	Separate mounting
Standards
Environmental conditions >Altitude	EN 50178, IEC 61800-3, EN 61800-3 incl. A11
Degree of Protection	Up to 2000 m a.s.l.; observe derating at higher altitudes m
Short Circuit Current Rating >High fault rating	IP20
Rated operational current for specified heat dissipation [In]
Heat dissipation per pole, current-dependent [Pvid]	100 kA
Equipment heat dissipation, current-dependent [Pvid]
Static heat dissipation, non-current-dependent [Pvs]	100 A
Heat dissipation capacity [Pdiss]	0 W
Operating ambient temperature min.	60 W
Operating ambient temperature max.	0 W
Degree of Protection	0 W
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	-25 °C
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	+50 °C
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	IP20
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Does not apply, since the entire switchgear needs to be evaluated.
10.5 Protection against electric shock	Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	Is the panel builder´s responsibility.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Is the panel builder´s responsibility.
Type of accessory	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Product Standards	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
UL File No.	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
North America Certification	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.