Ürün Açıklaması

Variable speed starter, Rated operational voltage 400 V AC, 3-phase, Ie 16 A, 7.5 kW, 10 HP, Radio interference suppression filter
Variable speed starters, Part group reference (e.g. DIL): DE1, Rated operational voltage: Ue = 400 V AC, 3-phase, 480 V AC, 3-phase, Output voltage with Ve: U2 = 400 V AC, 3-phase, 480 V AC, 3-phase, Mains voltage (50/60Hz): ULN = 380 (-10%) - 480 (+10%) V, Rated operational current At 150% overload: Ie = 16 A, Note: Rated operational current at an operating frequency of 16 kHz and an ambient air temperature of +50 °C, Note: Overload cycle for 60 s every 600 s, Assigned motor rating Note: for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm-1 at 50 Hz or 1800 min-1 at 60 Hz, Overload cycle for 60 s every 600 s, at 400 V, 50 Hz, Assigned motor rating 150 % Overload: P = 7.5 kW, 150 % Overload: IM = 15.2 A, Assigned motor rating Note: at 440 - 480 V, 60 Hz, Assigned motor rating 150 % Overload: P = 10 HP, Assigned motor rating 150 % Overload: IM = 14 A, Degree of Protection: IP20/NEMA 0, Interface/field bus (built-in): OP-Bus (RS485)/Modbus RTU, Fitted with: Radio interference suppression filter, Frame size: FS2, Standards: Specification for general requirements: IEC/EN 61800-2, EMC requirements: IEC/EN 61800-3, Safety requirements: IEC/EN 61800-5-1

Product range	Variable speed starter
Part group reference (e.g. DIL)	DE1
Rated operational voltage [Ue]	400 V AC, 3-phase 480 V AC, 3-phase
Output voltage with Ve [U2]	400 V AC, 3-phase 480 V AC, 3-phase
Mains voltage (50/60Hz) [ULN]	380 (-10%) - 480 (+10%) V
At 150% overload [Ie]
Note	16 A
Note	Rated operational current at an operating frequency of 16 kHz and an ambient air temperature of +50 °C
Note
Note	for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm-1 at 50 Hz or 1800 min-1 at 60 Hz
150 % Overload [P]	Overload cycle for 60 s every 600 s
150 % Overload [IM]	at 400 V, 50 Hz
Note	7.5 kW
150 % Overload [P]	15.2 A
150 % Overload [IM]	at 440 - 480 V, 60 Hz
Degree of Protection	10 HP
Interface/field bus (built-in)	14 A
Fitted with	IP20/NEMA0
Parameterization	OP-Bus (RS485)/Modbus RTU
Frame size	Radio interference suppression filter
Connection to SmartWire-DT	Keypad Fieldbus drivesConnect drivesConnect mobile (App)
Standards	FS2
Certifications	yes in conjunction with DX-NET-SWD3 SmartWire DT module
Production quality
Climatic proofing [ρw]	Specification for general requirements: IEC/EN 61800-2 EMC requirements: IEC/EN 61800-3 Safety requirements: IEC/EN 61800-5-1
Ambient temperature >Operating ambient temperature min.	CE, UL, cUL, RCM
Ambient temperature >Operating ambient temperature max.	RoHS, ISO 9001
Ambient temperature	< 95%, average relative humidity (RH), non-condensing, non-corrosive %
Ambient temperature	-10 °C
Ambient temperature >Storage [ϑ]	+60 °C
Radio interference level >Radio interference class (EMC)	Derating between 50 °C and 60 °C: None if fPWM ≦ 14 kHz up to a max. of 50 °C None if fPWM ≦ 16 kHz up to a max. of 46 °C None if Ie ≦ 14.9 A and fPWM ≦ 10 kHz None if Ie ≦ 10.6 A and fPWM ≦ 20 kHz
Radio interference level >Environment (EMC)	operation (150 % overload); max. +60 °C
Radio interference level >maximum motor cable length [I]	-40 - +70 °C
Mechanical shock resistance	C2, C3, depending on the motor cable length, the connected load, and ambient conditions. External radio interference suppression filters (optional) may be necessary.
Vibration	1st and 2nd environments as per EN 61800-3
Altitude	C2 ≤ 10 m C3 ≤ 25 m m
Degree of Protection	15 (11 m/s, EN 60068-2-27) g
Protection against direct contact	EN 61800-5-1
Supply >Rated operational voltage [Ue]	0 - 1000 m above sea level Above 1000 m: 1% derating for every 100 m max. 2000 m m
Supply >Mains voltage (50/60Hz) [ULN]	IP20/NEMA0
Supply >Input current (150% overload) [ILN]	BGV A3 (VBG4, finger- and back-of-hand proof)
Supply >Supply frequency [fLN]
Supply >Frequency range [fLN]	400 V AC, 3-phase 480 V AC, 3-phase
Supply >Mains switch-on frequency	380 (-10%) - 480 (+10%) V
Power section >Overload current (150% overload) [IL]	16.5 A
Power section >max. starting current (High Overload) [IH]	50/60 Hz
Power section >Note about max. starting current	45–66 (± 0%) Hz
Power section >Output voltage with Ve [U2]	Maximum of one time every 30 seconds
Power section >Output Frequency [f2]	24 A
Power section >Switching frequency [fPWM]	200 %
Power section >Operation Mode	for 1.875 seconds every 600 seconds
Power section >Frequency resolution (setpoint value) [Δf]	400 V AC, 3-phase 480 V AC, 3-phase
Power section >Rated operational current >At 150% overload [Ie]	0 - 50/60 (max. 300) Hz
Power section >Note	16 adjustable 4 - 32 (audible) kHz
Power section >Maximum leakage current to ground (PE) without motor [IPE]	U/f control Speed control with slip compensation
Power section >Fitted with	0.025 Hz
Power section >Frame size	16 A
Motor feeder >Note	Rated operational current at an operating frequency of 16 kHz and an ambient air temperature of +50 °C
Motor feeder >Note	< 3.5 AC, < 10 DC mA
Motor feeder >Note	Radio interference suppression filter
Motor feeder >150 % Overload [P]	FS2
Motor feeder >Note	for normal internally and externally ventilated 4 pole, three-phase asynchronous motors with 1500 rpm-1 at 50 Hz or 1800 min-1 at 60 Hz
Motor feeder >150 % Overload [P]	Overload cycle for 60 s every 600 s
Motor feeder >Apparent power >Apparent power at rated operation 400 V [S]	at 400 V, 50 Hz
Motor feeder >Apparent power >Apparent power at rated operation 480 V [S]	7.5 kW
Motor feeder >Braking function >Standard braking torque	at 440 - 480 V, 60 Hz
Motor feeder >Braking function >DC braking torque	10 HP
Reference voltage [Us]	11.09 kVA
Analog inputs	13.3 kVA
Digital inputs	max. 30 % MN
Relay outputs	adjustable to 100 %
Interface/field bus (built-in)
Power Wiring >Safety device (fuse or miniature circuit-breaker) >IEC (Type B, gG), 150 %	10 V DC (max. 0.2 mA) V
Power Wiring >Safety device (fuse or miniature circuit-breaker) >UL (Class CC or J)	1, parameterizable, 0 - 10 V DC, 0/4 - 20 mA
Power Wiring >Mains contactor >150 % overload (CT/IH, at 50 °C)	4, parameterizable, 10 - 30 V DC
Power Wiring >Main choke >150 % overload (CT/IH, at 50 °C)	1, N/O contact, 6 A (250 V, AC-1) / 5 A (30 V, DC-1)
Power Wiring >Radio interference suppression filter (external, 150 %)	OP-Bus (RS485)/Modbus RTU
Power Wiring >Radio interference suppression filter, low leakage currents (external, 150 %)
Power Wiring >Note regarding radio interference suppression filter	FAZ-B25/3
Motor feeder >motor choke >150 % overload (CT/IH, at 50 °C)	25 A
Rated operational current for specified heat dissipation [In]	DILM7-…
Heat dissipation per pole, current-dependent [Pvid]	DX-LN3-025
Equipment heat dissipation, current-dependent [Pvid]	DX-EMC34-030
Static heat dissipation, non-current-dependent [Pvs]	DX-EMC34-030-L
Heat dissipation capacity [Pdiss]	Optional external radio interference suppression filter for longer motor cable lengths and for use in different EMC environments
Operating ambient temperature min.	DX-LM3-016
Operating ambient temperature max.
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	16 A
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	0 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	240 W
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	0 W
10.2 Strength of materials and parts >10.2.5 Lifting	-10 °C
10.2 Strength of materials and parts >10.2.6 Mechanical impact	+60 °C
10.2 Strength of materials and parts >10.2.7 Inscriptions
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function	Is the panel builder´s responsibility.
Mains voltage	Is the panel builder´s responsibility.
Mains frequency	Is the panel builder´s responsibility.
Number of phases input	Is the panel builder´s responsibility.
Number of phases output	Is the panel builder´s responsibility.
Max. output frequency	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Max. output voltage	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Nominal output current I2N	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Max. output at quadratic load at rated output voltage	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Max. output at linear load at rated output voltage
Relative symmetric net frequency tolerance
Relative symmetric net voltage tolerance	342 - 528 V
Number of analogue outputs	50/60 Hz
Number of analogue inputs	3
Number of digital outputs	3
Number of digital inputs	300 Hz
With control unit	500 V
Application in industrial area permitted	7.5 A
Application in domestic- and commercial area permitted	10 kW
Supporting protocol for TCP/IP	10 kW
Supporting protocol for PROFIBUS	10 %
Supporting protocol for CAN	10 %
Supporting protocol for INTERBUS	0
Supporting protocol for ASI	1
Supporting protocol for KNX	0
Supporting protocol for MODBUS	4
Supporting protocol for Data-Highway	No
Supporting protocol for DeviceNet	Yes
Supporting protocol for SUCONET	Yes
Supporting protocol for LON	No
Supporting protocol for PROFINET IO	No
Supporting protocol for PROFINET CBA	No
Supporting protocol for SERCOS	No
Supporting protocol for Foundation Fieldbus	No
Supporting protocol for EtherNet/IP	No
Supporting protocol for AS-Interface Safety at Work	Yes
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for BACnet	No
Supporting protocol for other bus systems	No
Number of HW-interfaces industrial Ethernet	No
Number of interfaces PROFINET	No
Number of HW-interfaces RS-232	Yes
Number of HW-interfaces RS-422	No
Number of HW-interfaces RS-485	No
Number of HW-interfaces serial TTY	No
Number of HW-interfaces USB	No
Number of HW-interfaces parallel	No
Number of HW-interfaces other	No
With optical interface	Yes
With PC connection	0
Integrated breaking resistance	0
4-quadrant operation possible	0
Type of converter	0
Degree of protection (IP)	1
Degree of protection (NEMA)	0
Height	0
Width	0
Depth	0
Product Standards	No
UL File No.	Yes
UL Category Control No.	No
CSA File No.	No
North America Certification	U converter
Specially designed for North America	IP20
Suitable for	Other
Max. Voltage Rating	230 mm
Degree of Protection	90 mm