Ürün Açıklaması

IKA standard distribution board, IP65 without clamps
IKA distribution board for damp locations RAL7035, without neutral and protective conductor terminal, foamed-in-place gasket, applied using CNC, for IP65 degree of protection as per IEC/EN 62208, 36 space units, 3-row, approved for building service distribution boards in accordance with IEC/EN 61439-3 VDE 0660-600-3, integrated module compensation system designed to accommodate various device widths, metric knockouts with centering point, enclosure made of ABS and door made of polycarbonates, for installing switching and protective devices, in accordance with dimension standard DIN 43 880 with an installation depth of 70 mm or 85 mm, AC 1000 V, DC 1500 V, RoHs-compliant, consisting of a plastic base with a withdrawable DIN-rail made of galvanized sheet steel, DIN-rail adjustable in height in 2 positions, direct mounting wall mounting holes, knockout for metric cable entries on top and bottom, side knockouts for connection element for connecting two or more enclosures next to each other, top with 46-mm device opening, transparent door, flush with front, can be fitted on the right or left, door handing can be easily changed on-site without having to remove the enclosure top., enclosure top with sealable quick-release fasteners, door lockable with accessories LOCK-KIT-IKA, door can be sealed, including inscription labels.

Basic function	Basic device
Product function	Installation distribution boards
Product range	IKA standard DBO
Design	Surface mounted
Installation site	Indoor
Type of installation	Surface mounting
Door/Flap	Transparent
Degree of Protection	IP65
Colour	Grey
Module rack	Rail-frame
Shroud for protection against accidental contact	Plastic
Rows [Count]	3
Module units per row	12
Description	IP65 Protection Class II Plastic enclosure gray (RAL 7035)
Cable entries	Metric cable entries on top and bottom, side, back plate
PE and N terminals design	Without
Equipment supplied	Basic device Device support rails Locking screws can be sealed Sealing caps Current circuit designation
Standards	EN 62208, IEC/EN 60670-24
RoHS (in accordance with Directive 2002/95/EC of the European Parliament and Council)	conform
Ambient temperature	-25 - +40 °C
Degree of Protection	IP65
Protection class	II (totally insulated)
Rated operational voltage [Ue]	415 V AC
Rated frequency [f]	50 Hz
Material	ABS (plastic)
Colour	Gray (RAL 7035)
Mechanical >Impact resistance	IK08
Heat dissipation, at an ambient temperature of 35°C, delta T: 20 degrees in top of the enclosure, calculated as per IEC 60890 >Individual enclosure for wall mounting [PV]	37 W
Heat dissipation, at an ambient temperature of 35°C, delta T: 35 degrees in top of the enclosure, calculated as per IEC 60890 >Individual enclosure for wall mounting [PV]	75 W
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	650 °C; meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Not relevant to indoor installations.
10.2 Strength of materials and parts >10.2.5 Lifting	Does not apply to enclosures without lifting aids.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	IK08
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	IP65
10.4 Clearances and creepage distances	Is the panel builder´s responsibility.
10.5 Protection against electric shock	Protection class 2, therefore not applicable.
10.6 Incorporation of switching devices and components	Is the panel builder´s responsibility.
10.7 Internal electrical circuits and connections	Is the panel builder´s responsibility.
10.8 Connections for external conductors	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Ui = 1000 V AC
10.9 Insulation properties >10.9.3 Impulse withstand voltage	3.3 kV
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Meets the product standard´s requirements.
Mounting method	Surface mounted (plaster)
Number of rows	3
Width in number of modular spacings	12
Type of cover	Door
Cover model	With notch
Transparent cover/door	Yes
Material housing	Plastic
Height	586 mm
Width	310 mm
Depth	145 mm
Built-in depth	70 mm
Internal depth	60 mm
DIN-rail	Yes
With mounting plate	No
Extension possible	Yes
EMC-version	No
Colour	Grey
RAL-number	7035
Degree of protection (IP)	IP65
With lock	No
Type of closure	Other