SKU: Eaton-172886
Power supply unit, 3-phase, 400-500VAC/24VDC, 40A
Power supply unit, Product range: Power supplies PSG, Subrange: power supply unit, Description: Power Boost via 1.5-fold rated operational current for 5 s, PELV (EN 60204), SELV (EN 60950), Width: 255 mm, Height: 121 mm, Depth: 117.3 mm, Three-phase, Input voltage range: 320 - 600 V AC, (450 - 800 V DC), Nominal input voltage: 3 x 400 - 500 V AC, Rated output voltage: 24 V DC (± 2%), Rated output current: 40 A, Setting range for the output voltage: 24 - 28 V DC, Rated output power: 960 W, Degree of Protection: IP20, Heat dissipation: 94 W
Product range | Power supplies PSG |
Subrange | power supply unit |
Description | Power Boost via 1.5-fold rated operational current for 5 s PELV (EN 60204), SELV (EN 60950) |
Phases | Three-phase |
Input voltage range | 320 - 600 V AC (450 - 800 V DC) |
Nominal input voltage | 3 x 400 - 500 V AC |
Rated output voltage | 24 V DC (± 2%) |
Rated output current | 40 A |
Setting range for the output voltage | 24 - 28 V DC |
Rated output power | 960 W |
Nominal input voltage | |
Input voltage range | 3 x 400 - 500 V AC |
Supply frequency >Rated value |
3 x 320 - 600 V AC 2 x 360 - 600 V AC 450 - 800 V DC V |
Supply frequency >Range |
50/60 Hz |
Nominal current [In ] | 47 - 63 Hz |
Inrush current limitation I²t (+25 °C) | < 1.7 bei 3 x 400 V AC < 1.4 bei 3 x 500 V AC A |
Mains buffering at nominal load >Mains failure bridging |
< 60 A with 3x 400 V AC & 3x 500 V AC A |
Run-up time after mains voltage applied | > 20 with 3x 400 V AC & 3x 500 V AC ms |
Internal input fuse (device protection, not accessible) | < 1500 ms |
Back-up fuse | T4 AH/500 V |
Tripping characteristic | 10, 16 A (recommended) |
Leakage Current | B |
Short-term interruption | < 3.5 mA at 500 V AC |
DC duty | 100% voltage dip, 1 cycle (20 ms at 50 Hz), automatic start |
Rated output power | L1 +, L2 –, L3 nc, PE ㊏ L1 +, L2 nc, L3 –, PE ㊏ |
Rated output voltage | |
Tolerance | 960 W |
Setting range for the output voltage | 24 V DC (± 2%) |
Nominal current | ±2 % |
Derating from Tamb > +50 °C | 24 - 28 V DC |
Capacitive load starting | 40 A |
Heat dissipation | Vertical: > 50°C (2.5 %/ °C) |
Efficiency | Max 10000 µF |
Residual ripple and switching peaks | 94 W |
Can be switched in parallel | > 92 with 3 x 400 V AC & 3 x 500 V AC % |
Housing | < 50 mVpp / < 150 mVpp |
Status indication | for redundancy, with O ring diode (PSG960R24RM) |
MTBF (mean time between failures) | |
Height | Aluminium |
Width | green LED for "DC OK" |
Depth | > 300,000 h |
Weight | 121 mm |
Terminations | 255 mm |
Stripping length | 117.3 mm |
Terminal capacity >flexible with ferrules/solid |
2.6 kg |
Tightening torque | Screw connection |
Ambient air temperature range >Operation |
7 mm |
Ambient air temperature range >Storage, transport [ϑ] >Storage [ϑ] |
Primary side: 0.82 - 8.4 mm² (18 - 8 AWG) Secondary side: 3.3 - 5.3 mm² (12 - 10 AWG) mm2 |
damp heat | Primary side: 0.9 Secondary side: 0.9 Nm |
Vibrations (IEC/EN 60068-2-6) | -25 - +65 °C |
Mechanical shock resistance (IEC 60068-2-27) | -25 - +85 °C |
Climatic class (IEC) | < 95 % relative humidity at +25 °C, no condensation |
Transient overvoltage protection | 10 - 500 Hz at 30 m/s² (3 G max ) for 60 min. in X-axis, Y-axis, Z-axis directions |
Current limitation at short-circuit | 30 g (300 m/s²) in all directions |
Overvoltage protection | 3K3 according to EN 60721 |
Insulation voltage >Input/Output |
|
Insulation voltage >Input/PE |
Varistor |
Insulation voltage >Output/PE |
IÜberstrom = 150 % der max. Ausgangsleistung |
Degree of Protection | Yes, against internal overvoltage |
Protection class | 4 kV AC |
Approvals | 2 kV AC |
Static heat dissipation, non-current-dependent [Pvs] | 1.5 kV AC |
Operating ambient temperature min. | IP20 |
Operating ambient temperature max. | Class I with PE connection |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
|
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
Electrical equipment of machines: IEC60204-1 (Overvoltage category III) Equipping power installations with electronic apparatus: EN 50178/IEC 62103 Safety extra-low voltage: PELV (EN 60204), SELV (EN 60950) Protection against electric shock: DIN 57100-410 CE: according to EMC Directive 2014/30/EU and Low Voltage Directive 2014/35/EU RoHS-compliant: RoHS Directive 2011/65/EU ITE: EN 55022, EN 61000-3-2, EN 61000-3-3, EN 55024 Industrial: EN 55011 Mains harmonics limitation: EN 601000-3-2 Electrical Safety (of IT equipment) : SIQ to EN60950-1, UL/c-UL recognized to UL 60950-1, CSA C22.2 No. 60950-1, CB scheme to IEC 60950-1 UL508 Class2: UL/c-UL recognized to UL1310 and CSA C22.2 No. 223 | Component power supply unit for general use: EN61204-3 |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
EAC |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
|
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
94 W |
10.2 Strength of materials and parts >10.2.5 Lifting |
-25 °C |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
+65 °C |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
|
10.3 Degree of protection of ASSEMBLIES | Meets the product standard´s requirements. |
10.4 Clearances and creepage distances | Meets the product standard´s requirements. |
10.5 Protection against electric shock | Meets the product standard´s requirements. |
10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
10.8 Connections for external conductors | Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
10.10 Temperature rise | Meets the product standard´s requirements. |
10.11 Short-circuit rating | Does not apply, since the entire switchgear needs to be evaluated. |
10.12 Electromagnetic compatibility | Does not apply, since the entire switchgear needs to be evaluated. |
10.13 Mechanical function | Is the panel builder´s responsibility. |
Voltage type of supply voltage | Is the panel builder´s responsibility. |
1st secondary output voltage | Is the panel builder´s responsibility. |
2nd secondary output voltage | Is the panel builder´s responsibility. |
3rd secondary output voltage | Is the panel builder´s responsibility. |
Max. output current 1 | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
Max. output current 2 | Is the panel builder´s responsibility. |
Max. output current 3 | Is the panel builder´s responsibility. |
Secondary voltage adjustable | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Nominal value output voltage 1 | |
Nominal value output voltage 2 | |
Nominal value output voltage 3 | AC |
Nominal value output current 1 | 24 - 28 V |
Nominal value output current 2 | 0 - 0 V |
Nominal value output current 3 | 0 - 0 V |
Short-circuit-proof | 40 A |
Rated supply voltage at AC 50 Hz | 0 A |
Rated supply voltage at AC 60 Hz | 0 A |
Rated supply voltage at DC | Yes |
Output voltage stabilized | 24 V |
Power consumption | 0 V |
Power output | 0 V |
Stabilized | 24 A |
Type of electric connection | 0 A |
Rail mounting possible | 0 A |
Wall mounting possible | Yes |
Modular version | 320 - 600 V |
Width in number of modular spacings | 320 - 600 V |
Built-in width | 0 - 0 V |
Built-in height | Yes |
Direct mounting possible | 680 VA |
Width | 960 W |
Height | Yes |
Depth | Screw connection |
Suitable for safety functions | Yes |
SIL according to IEC 61508 | No |
Performance level acc. EN ISO 13849-1 | Yes |
Degree of protection (IP) | 0 |
Degree of protection (NEMA) | 225 mm |