Ürün Açıklaması

Soft starter, 160 A, 200 - 480 V AC, 24 V AC/DC, Frame size FS4, Ambient temperature Operation -40 - +40 °C
Soft starter, Description: With internal bypass contacts, Function: Soft starters for three-phase loads, Mains supply voltage (50/60 Hz): ULN= 200 - 480 V AC, Supply voltage: Us= 24 V AC/DC, Control voltage: UC= 24 V AC, 24 V DC, Assigned motor rating (Standard connection, In-Line) at 400 V, 50 Hz: P= 90 kW, at 460 V, 60 Hz: P= 125 HP, Rated operational current AC-53: Ie= 160 A, Rated operational voltage: Ue= 200 V, 230 V, 400 V, 480 V, Connection to SmartWire-DT: no, Frame size: FS4, Standards: IEC/EN 60947-4-2, UL 508, CSA22.2-14

Description	With internal bypass contacts
Function	Soft starters for three-phase loads
Mains supply voltage (50/60 Hz) [ULN]	200 - 480 V AC
Supply voltage [Us]	24 V AC/DC
Control voltage [UC]	24 V AC 24 V DC
at 400 V, 50 Hz [P]
at 460 V, 60 Hz [P]	90 kW
AC-53 [Ie]	125 HP
Rated operational voltage [Ue]
Connection to SmartWire-DT	160 A
Frame size	200 V 230 V 400 V 480 V
Standards	no
Approvals	FS4
Approvals
Climatic proofing	IEC/EN 60947-4-2 UL 508 CSA22.2-14
Ambient temperature >Operation [ϑ]	CE
Ambient temperature >Storage [ϑ]	UL CSA C-Tick UkrSEPRO
Altitude	Damp heat, constant, to IEC 60068-2-3 Damp heat, cyclic, to IEC 60068-2-10 Cold to EN 60068-2-1
Mounting position	-40 - +40 up to 60 at 2% derating per Kelvin temperature rise °C
Degree of protection >Degree of Protection	-40 - +60 °C
Degree of protection >Integrated	0 - 1000 m, above that 1 % derating per 100 m , up to 2000 m m
Protection against direct contact	Vertical
Overvoltage category/pollution degree	IP20 (terminals IP00)
Shock resistance	Protection type IP40 can be achieved on all sides with covers from the NZM range.
Vibration resistance to EN 60721-3-2	Finger- and back-of-hand proof
Radio interference level (IEC/EN 55011)	II/2
Static heat dissipation, non-current-dependent [Pvs]	8 g/11 ms
Weight	2M2
Rated operating voltage [Ue]	B
Supply frequency [fLN]	30 W
Rated operational current [Ie ] >AC-53 [Ie]	3.7 kg
Assigned motor rating (Standard connection, In-Line) >at 230 V, 50 Hz [P]
Assigned motor rating (Standard connection, In-Line) >at 400 V, 50 Hz [P]	200 - 480 V AC
Assigned motor rating (Standard connection, In-Line) >at 200 V, 60 Hz [P]	50/60 Hz
Assigned motor rating (Standard connection, In-Line) >at 230 V, 60 Hz [P]	160 A
Assigned motor rating (Standard connection, In-Line) >at 460 V, 60 Hz [P]	45 kW
Overload cycle to IEC/EN 60947-4-2 >AC-53a	90 kW
Overload cycle to IEC/EN 60947-4-2 >Internal bypass contacts	50 HP
Short-circuit rating >Type “1” coordination	60 HP
Short-circuit rating >Type „2“ coordination (additional with the fuses for coordination type „1“)	125 HP
Fuse base (number x part no.)	160 A: AC-53a: 3 - 5: 75 - 10
Cable lengths >Solid	✓
Cable lengths >Stranded	NZMN2-M200
Cable lengths >Solid or stranded	3 x 170M5008
Cable lengths >Copper band	3 x 170H3004
Cable lengths >Tightening torque
Cable lengths >Screwdriver (PZ: Pozidriv)	1 x (4 - 185) 2 x (4 - 70) mm2
Control cables >Solid	1 x (25 - 70) 2 x (6 - 25) mm2
Control cables >Flexible with ferrule	1 x (12 - 350 kcmil) 2 x (12 - 00) AWG
Control cables >Stranded	2 x 9 x 0.810 x 16 x 0.8 MM
Control cables >Solid or stranded	6 (≤ 10 mm²); 9 (> 10 mm²) Nm
Control cables >Tightening torque	PZ2; 1 x 6 mm mm
Control cables >Screwdriver	1 x (0.5 - 2.5) 2 x (0.5 - 1.0) mm2
Digital inputs >Control voltage >DC-operated	1 x (0.5 - 1.5) 2 x (0.5 - 0.75) mm2
Digital inputs >Current consumption 24 V >External 24 V	1 x (0.5 - 1.5) 2 x (0.5 - 1.0) mm2
Digital inputs >Pick-up voltage >DC-operated	1 x (21 - 14) 2 x (21 - 18) AWG
Digital inputs >Pick-up voltage >AC operated	0.4 Nm
Digital inputs >Drop-out voltage [x Us ] >DC operated	0,6 x 3,5 mm
Digital inputs >Drop-out voltage [x Us ] >AC operated
Digital inputs >Pick-up time >DC operated	24 V DC +10 %/- 15 % V DC
Digital inputs >Pick-up time >AC operated	1.6 mA
Digital inputs >Drop-out time >DC operated	17.3 - 27 V DC
Regulator supply >Voltage [Us]	17.3 - 27 V AC
Regulator supply >Current consumption [Ie]	0 - 3 V DC
Regulator supply >Current consumption at peak performance (close bypass) at 24 V DC [IPeak]	0 - 3 V AC
Regulator supply >Notes	250 ms
Relay outputs >Number	250 ms
Relay outputs >Voltage range	350 ms
Relay outputs >AC-11 current range	24 V AC/DC +10 %/- 15 % V
Ramp times >Acceleration >Ramp time, max.	50 mA
Ramp times >Deceleration	0,6/50 A/ms
Start voltage (= turn-off voltage)	External supply voltage
Start pedestal	2 (TOR, Ready)
Fields of application >Fields of application	250 V AC
Fields of application >1-phase motors	1 A, AC-11 A
Fields of application >3-phase motors
Fast switching (semiconductor contactor)	30 s
Soft start function	0 - 30 s
Reversing starter	30100 %
Suppression of closing transients	30 - 100 %
Suppression of DC components for motors	Soft starting of three-phase asynchronous motors
Potential isolation between power and control sections	●
Rated operational current for specified heat dissipation [In]	✓
Heat dissipation per pole, current-dependent [Pvid]
Equipment heat dissipation, current-dependent [Pvid]	- (minimum ramp time 1s)
Static heat dissipation, non-current-dependent [Pvs]	✓
Heat dissipation capacity [Pdiss]	External solution required
Operating ambient temperature min.	✓
Operating ambient temperature max.	✓
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	✓
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	160 A
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0 W
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	30 W
10.2 Strength of materials and parts >10.2.5 Lifting	30 W
10.2 Strength of materials and parts >10.2.6 Mechanical impact	0 W
10.2 Strength of materials and parts >10.2.7 Inscriptions	-40 °C
10.3 Degree of protection of ASSEMBLIES	+40 °C
10.4 Clearances and creepage distances
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Meets the product standard´s requirements.
10.13 Mechanical function	Does not apply, since the entire switchgear needs to be evaluated.
Rated operation current Ie at 40 °C Tu	Does not apply, since the entire switchgear needs to be evaluated.
Rated operating voltage Ue	Is the panel builder´s responsibility.
Rated power three-phase motor, inline, at 230 V	Is the panel builder´s responsibility.
Rated power three-phase motor, inline, at 400 V	Is the panel builder´s responsibility.
Rated power three-phase motor, inside delta, at 230 V	Is the panel builder´s responsibility.
Rated power three-phase motor, inside delta, at 400 V	Is the panel builder´s responsibility.
Function	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Internal bypass	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
With display	Is the panel builder´s responsibility. The specifications for the switchgear must be observed.
Torque control	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Rated surrounding temperature without derating
Rated control supply voltage Us at AC 50HZ
Rated control supply voltage Us at AC 60HZ	160 A
Rated control supply voltage Us at DC	230 - 460 V
Voltage type for actuating	54 kW
Integrated motor overload protection	90 kW
Release class	0 kW
Degree of protection (IP)	0 kW
Degree of protection (NEMA)	Single direction
Product Standards	Yes
UL File No.	No
CSA File No.	No
CSA Class No.	40 °C
Suitable for	24 - 24 V
Max. Voltage Rating	24 - 24 V
Degree of Protection	24 - 24 V