SKU: Eaton-169855
Soft starter, 135 A, 200 - 600 V AC, Us= 24 V DC, Frame size R
Soft starter, Description: With internal bypass contacts, Function: Soft starters for three-phase loads, Mains supply voltage (50/60 Hz): ULN= 200 - 600 V AC, Supply voltage: Us= 24 V DC, Control voltage: UC= 24 V DC, Assigned motor rating (Standard connection, In-Line) at 400 V, 50 Hz: P= 75 kW, at 460 V, 60 Hz: P= 100 HP, Rated operational current AC-53: Ie= 135 A, Startup class: CLASS 10 (star-delta replacement), CLASS 20 (heavy starting duty 3 x Ie for 45 s), CLASS 30 (6 x Ie for 30 s), Rated operational voltage: Ue= 200 V, 230 V, 400 V, 480 V, 600 V, Connection to SmartWire-DT: no, Frame size: R, Standards: IEC/EN 60947-4-2, UL 508, CSA22.2-14-1995, GB14048
Description | With internal bypass contacts |
Function | Soft starters for three-phase loads |
Mains supply voltage (50/60 Hz) [ULN] | 200 - 600 V AC |
Supply voltage [Us] | 24 V DC |
Control voltage [UC] | 24 V DC |
at 400 V, 50 Hz [P] | |
at 460 V, 60 Hz [P] | 75 kW |
AC-53 [Ie] | 100 HP |
Startup class | |
Rated operational voltage [Ue] | 135 A |
Connection to SmartWire-DT | CLASS 10 (star-delta replacement) CLASS 20 (heavy starting duty 3 x Ie for 45 s) CLASS 30 (6 x Ie for 30 s) |
Frame size | 200 V 230 V 400 V 480 V 600 V |
Standards | no |
Approvals | R |
Approvals | |
Climatic proofing | IEC/EN 60947-4-2 UL 508 CSA22.2-14-1995 GB14048 |
Ambient temperature >Operation [ϑ] |
CE |
Ambient temperature >Storage [ϑ] |
UL CSA C-Tick CCC |
Altitude | Damp heat, constant, to IEC 60068-2-3 Damp heat, cyclic, to IEC 60068-2-10 |
Mounting position | -30 - +50 °C |
Degree of protection >Degree of Protection |
-50 - +70 °C |
Degree of protection >Integrated |
0 - 2000 m, above that each 100 m 0.5% Derating m |
Protection against direct contact | As required |
Overvoltage category/pollution degree | IP20 (terminals IP00) |
Shock resistance | Protection type IP40 can be achieved on all sides with covers SS-IP20-N. |
Radio interference level (IEC/EN 55011) | Finger- and back-of-hand proof |
Static heat dissipation, non-current-dependent [Pvs] | II/3 |
Weight | 15 g |
Rated operating voltage [Ue] | A |
Supply frequency [fLN] | 55 W |
Rated operational current [Ie
] >AC-53 [Ie] |
4.8 kg |
Assigned motor rating (Standard connection, In-Line) >at 230 V, 50 Hz [P] |
|
Assigned motor rating (Standard connection, In-Line) >at 400 V, 50 Hz [P] |
200 - 600 V AC |
Assigned motor rating (Standard connection, In-Line) >at 500 V, 50 Hz [P] |
50/60 Hz |
Assigned motor rating (Standard connection, In-Line) >at 200 V, 60 Hz [P] |
135 A |
Assigned motor rating (Standard connection, In-Line) >at 230 V, 60 Hz [P] |
37 kW |
Assigned motor rating (Standard connection, In-Line) >at 460 V, 60 Hz [P] |
75 kW |
Assigned motor rating (Standard connection, In-Line) >at 600 V, 60 Hz [P] |
90 kW |
Overload cycle to IEC/EN 60947-4-2 >AC-53a |
40 HP |
Overload cycle to IEC/EN 60947-4-2 >Internal bypass contacts |
50 HP |
Short-circuit rating >Type “1” coordination |
100 HP |
Cable lengths >Solid |
125 HP |
Cable lengths >Flexible with ferrule |
135 A: AC-53a: 4.0 - 32: 99 - 3 |
Cable lengths >Stranded |
✓ |
Cable lengths >Solid or stranded |
NZMN2-S160 |
Cable lengths >Tightening torque |
|
Cable lengths >Screwdriver (PZ: Pozidriv) |
1 x (2.5 - 35) mm2 |
Control cables >Solid |
1 x (2.5 - 35) mm2 |
Control cables >Flexible with ferrule |
1 x (2.5 - 95) mm2 |
Control cables >Stranded |
1 x (14 - 4/0) AWG |
Control cables >Solid or stranded |
11.3 Nm |
Control cables >Tightening torque |
4 mm Innensechskant mm |
Control cables >Screwdriver |
1 x (2.5 - 4) 2 x (1.0 - 2.5) mm2 |
Digital inputs >Control voltage >DC-operated |
1 x (2.5 - 4) 2 x (1.0 - 2.5) mm2 |
Digital inputs >Current consumption 24 V >External 24 V |
1 x (2.5 - 4) 2 x (1.0 - 2.5) mm2 |
Digital inputs >Current consumption 24 V >External 24 V (no-load) |
50 x (12 - 14) 2 x (12 - 14) AWG |
Digital inputs >Pick-up voltage >DC-operated |
0.4 Nm |
Digital inputs >Drop-out voltage [x Us ] >DC operated >Drop-out voltage, DC-operated, max. |
0,6 x 3,5 mm |
Digital inputs >Pick-up time >DC operated |
|
Digital inputs >Drop-out time >DC operated |
24 V DC +10 %/- 10 % V DC |
Regulator supply >Voltage [Us] |
150 mA |
Regulator supply >Current consumption [Ie] |
100 mA |
Regulator supply >Current consumption at peak performance (close bypass) at 24 V DC [IPeak] |
21.6 - 26.4 V DC |
Regulator supply >Notes |
3 V DC |
Relay outputs >Number |
100 ms |
Relay outputs >of which programmable |
100 ms |
Relay outputs >Voltage range |
24 V DC +10 %/- 10 % V |
Relay outputs >AC-11 current range |
1000 mA |
Ramp times >Acceleration >Ramp time, max. |
10/150 A/ms |
Ramp times >Deceleration |
External supply voltage |
Start voltage (= turn-off voltage) >Start voltage, max. |
2 |
Start pedestal >Start voltage, max. |
2 |
Kickstart >Voltage >Kickstart voltage, max. |
120 V AC/DC V AC |
Kickstart >Duration >50 Hz >Kickstart Duration 50 Hz max. |
3 A, AC-11 A |
Kickstart >Duration >60 Hz >Kickstart Duration 60 Hz max. |
|
Fields of application >Fields of application |
180 s |
Fields of application >3-phase motors |
0 - 60 s |
Fast switching (semiconductor contactor) | 85 % |
Soft start function | 85 % |
Reversing starter | 100 % |
Suppression of closing transients | 2000 ms |
Current limitation | 2000 ms |
Overload monitoring | Soft starting of three-phase asynchronous motors |
Underload monitoring | ✓ |
Fault memory | |
Suppression of DC components for motors | - (minimum ramp time 1s) |
Potential isolation between power and control sections | ✓ |
Communication Interfaces | External solution required (reversing contactor) |
Rated operational current for specified heat dissipation [In] | ✓ |
Heat dissipation per pole, current-dependent [Pvid] | ✓ |
Equipment heat dissipation, current-dependent [Pvid] | ✓ |
Static heat dissipation, non-current-dependent [Pvs] | ✓ |
Heat dissipation capacity [Pdiss] | 10 Faults |
Operating ambient temperature min. | ✓ |
Operating ambient temperature max. | ✓ |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
Modbus RTU |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
|
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
135 A |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
0 W |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
55 W |
10.2 Strength of materials and parts >10.2.5 Lifting |
55 W |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
0 W |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
-30 °C |
10.3 Degree of protection of ASSEMBLIES | +50 °C |
10.4 Clearances and creepage distances | |
10.5 Protection against electric shock | Meets the product standard´s requirements. |
10.6 Incorporation of switching devices and components | Meets the product standard´s requirements. |
10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
10.8 Connections for external conductors | Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Does not apply, since the entire switchgear needs to be evaluated. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Does not apply, since the entire switchgear needs to be evaluated. |
10.10 Temperature rise | Meets the product standard´s requirements. |
10.11 Short-circuit rating | Does not apply, since the entire switchgear needs to be evaluated. |
10.12 Electromagnetic compatibility | Meets the product standard´s requirements. |
10.13 Mechanical function | Does not apply, since the entire switchgear needs to be evaluated. |
Rated operation current Ie at 40 °C Tu | Does not apply, since the entire switchgear needs to be evaluated. |
Rated operating voltage Ue | Is the panel builder´s responsibility. |
Rated power three-phase motor, inline, at 230 V | Is the panel builder´s responsibility. |
Rated power three-phase motor, inline, at 400 V | Is the panel builder´s responsibility. |
Rated power three-phase motor, inside delta, at 230 V | Is the panel builder´s responsibility. |
Rated power three-phase motor, inside delta, at 400 V | Is the panel builder´s responsibility. |
Function | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
Internal bypass | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
With display | Is the panel builder´s responsibility. The specifications for the switchgear must be observed. |
Torque control | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Rated surrounding temperature without derating | |
Rated control supply voltage Us at AC 50HZ | |
Rated control supply voltage Us at AC 60HZ | 135 A |
Rated control supply voltage Us at DC | 200 - 600 V |
Voltage type for actuating | 37 kW |
Integrated motor overload protection | 75 kW |
Release class | 75 kW |
Degree of protection (IP) | 132 kW |
Degree of protection (NEMA) | Single direction |
Product Standards | Yes |
UL File No. | No |
UL Category Control No. | No |
CSA File No. | 50 °C |
CSA Class No. | 0 - 0 V |
North America Certification | 0 - 0 V |
Suitable for | 24 - 24 V |
Max. Voltage Rating | DC |
Degree of Protection | Yes |