Ürün Açıklaması

Digital output module XI/ON, 120/230VAC, 2DO, 0.5A
The XI/ON standard I/O system offers the right I/O solution for every application due to its great modularity and large variety of functions. Pluggable modules, hot-swapping of modules, wiring on the basic module screw or tension spring, modules´ mechanical coding. The standard gateways support the CANopen bus systems, PROFIBUS-DP deviceNet and Ethernet.

Function	XI/ON I/O modules
Function	XN Slice module
Short Description	2 Digital output, 120/230 V AC/0.5 A
For use with	XN-S3T-SBC XN-S3S-SBC XN-S4T-SBCS XN-S4S-SBCS
Standards
Potential isolation	EN 61000-6-2 EN 61000-6-4 EN 61131-2
Ambient temperature >Ambient temperature, operation	Yes, through optocoupler
Ambient temperature >Storage, transport [ϑ]	0 - +55 °C
Relative humidity >Relative humidity	-25 - +85 °C
Ambient conditions, mechanical >Degree of Protection	5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C)
Ambient conditions, mechanical >Harmful gases	IP20
Vibration resistance, operating conditions	SO2: 10 (rel. humidity < 75%, no condensation) H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm
Mechanical shock resistance	according to IEC/EN 60068-2-6
Continuous shock resistance (IEC/EN 60068-2-29)	according to IEC 60068-2-27 g
Drop and topple	According to IEC 60068-2-29
Electromagnetic compatibility (EMC) >ESD [Air/contact discharge]	According to IEC 60068-2-31, free fall according to IEC 60068-2-32
Electromagnetic compatibility (EMC) >Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ]	EN 61000-4-2 kV
Electromagnetic compatibility (EMC) >Burst	EN 61100-4-2 V/m
Electromagnetic compatibility (EMC) >Surge	EN 61100-4-4
Electromagnetic compatibility (EMC) >Radiated RFI	EN 61100-4-5
Electromagnetic compatibility (EMC) >Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)]	EN 61100-4-6 V
Electromagnetic compatibility (EMC) >Voltage fluctuations/voltage dips	EN 55016-2-3 dB
Electromagnetic compatibility (EMC) >Type test	EN 61131-2
Approvals	to EN 61131-2
Other technical data (sheet catalogue)	CE, cULus
Channels	Technical Data
Rated voltage through supply terminal [UL ]
Rated current consumption from module bus [IMB ]	2 Number
Connectable sensors	120/230 V AC (45 - 65 Hz)
Diagnostics	≦ 35 mA
Channels	Resistive loads Inductive loads Lamp loads
Rated voltage through supply terminal [UL ]	No
Rated current consumption from module bus [IMB ]
Channels	2 Number
Rated voltage through supply terminal [UL ]	120/230 V AC (45 - 65 Hz)
Rated current consumption from module bus [IMB ]	≦ 35 mA
Power loss [P]
Output voltage >High level [UH⁄UA ]	2 Number
Output current >High level (rated value) [IH ]	120/230 V AC (45 - 65 Hz)
Output current >High level (permissible range) [IH ]	≦ 35 mA
Output current >Low signal [IA ]	Normally 1 W
Back-up fuse	> UL - 2 V DC (zero-point switching triac)
Surge current [IS ]	0.5 A
Module total current	0.02 - 0.5 A
Delay on signal change and resistive load >from Low to High level	< 1.5 mA
Delay on signal change and resistive load >From High to Low signal	500 mA FF
Load resistance range	8 (1 period at 60 Hz) A
Utilization factor [%]	1 A
Can be connected	T/2 +1 ms µs
Diagnostics	T/2 +1 ms µs
Base modules >with C connection	at 120 V AC 240 Ω - 6 kΩ at 230 V AC 460 Ω - 11.5 kΩ
Channels	100 (observe derating) g
Rated voltage through supply terminal [UL ]	Resistive loads Inductive loads Lamp loads
Rated current consumption from module bus [IMB ]	No
Input voltage >High level [UeH]	2-wire/3-wire XN-S3x-SBC 4-wire XN-S4x-SBCS
Base modules >with C connection
Rated voltage through supply terminal [UL ]	2 Number
Rated current consumption from module bus [IMB ]	120/230 V AC (45 - 65 Hz)
Power loss [P]	≦ 35 mA
Can be connected	> UL (-2 V) V
Utilization factor [g]	2-wire/3-wire XN-S3x-SBC 4-wire XN-S4x-SBCS
Base modules >with C connection
Rated voltage through supply terminal [UL ]	120/230 V AC (45 - 65 Hz)
Rated current consumption from module bus [IMB ]	≦ 35 mA
Power loss [P]	Normally 1 W
Channels	Resistive loads Inductive loads Lamp loads
Rated voltage through supply terminal [UL ]	100 %
Rated current consumption from module bus [IMB ]	2-wire/3-wire XN-S3x-SBC 4-wire XN-S4x-SBCS
Input voltage >High level [UeH]
Output current >High level (permissible range) [IH ]	120/230 V AC (45 - 65 Hz)
Output current >High level (rated value) [IH ]	≦ 35 mA
Rated voltage through supply terminal [UL ]	1 W
Rated current consumption from module bus [IMB ]
Power loss [P]	2 Number
Note for table header	120/230 V AC (45 - 65 Hz)
Rated operational current for specified heat dissipation [In]	≦ 35 mA
Heat dissipation per pole, current-dependent [Pvid]
Equipment heat dissipation, current-dependent [Pvid]	> UL (-2 V) V
Static heat dissipation, non-current-dependent [Pvs]
Heat dissipation capacity [Pdiss]	0.02 - 0.5 A
Operating ambient temperature min.	0.5 A
Operating ambient temperature max.
Degree of Protection	120/230 V AC (45 - 65 Hz)
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	≦ 35 mA
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	Normally 1 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	The supply terminal (UL) provides power for the module electronics and for the consumers at the outputs. The total current required for each module consists of the sum of all partial currents. Part of the XI/ON module’s electronics is supplied with module bus voltage (5 V DC), the other part through the supply terminal (UL). To increase the maximum output current to up to 1 A, two outputs can be connected in parallel.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	The rated current from supply terminal data apply at zero load current. Applies for resistive load: RLO < 1kΩ
10.2 Strength of materials and parts >10.2.5 Lifting
10.2 Strength of materials and parts >10.2.6 Mechanical impact	0 A
10.2 Strength of materials and parts >10.2.7 Inscriptions	0 W
10.3 Degree of protection of ASSEMBLIES	0 W
10.4 Clearances and creepage distances	1 W
10.5 Protection against electric shock	0 W
10.6 Incorporation of switching devices and components	0 °C
10.7 Internal electrical circuits and connections	+55 °C
10.8 Connections for external conductors	IP20
10.9 Insulation properties >10.9.2 Power-frequency electric strength
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Meets the product standard´s requirements.
10.12 Electromagnetic compatibility	Meets the product standard´s requirements.
10.13 Mechanical function	Does not apply, since the entire switchgear needs to be evaluated.
Supply voltage AC 50 Hz	Does not apply, since the entire switchgear needs to be evaluated.
Supply voltage AC 60 Hz	Meets the product standard´s requirements.
Supply voltage DC	Meets the product standard´s requirements.
Voltage type of supply voltage	Meets the product standard´s requirements.
Number of digital inputs	Does not apply, since the entire switchgear needs to be evaluated.
Number of digital outputs	Does not apply, since the entire switchgear needs to be evaluated.
Digital inputs configurable	Is the panel builder´s responsibility.
Digital outputs configurable	Is the panel builder´s responsibility.
Input current at signal 1	Is the panel builder´s responsibility.
Permitted voltage at input	Is the panel builder´s responsibility.
Type of voltage (input voltage)	Is the panel builder´s responsibility.
Type of digital output	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Output current	Is the panel builder´s responsibility.
Permitted voltage at output	Is the panel builder´s responsibility.
Type of output voltage	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Short-circuit protection, outputs available
Number of HW-interfaces industrial Ethernet
Number of interfaces PROFINET	102 - 253 V
Number of HW-interfaces RS-232	102 - 253 V
Number of HW-interfaces RS-422	0 - 0 V
Number of HW-interfaces RS-485	AC
Number of HW-interfaces serial TTY	0
Number of HW-interfaces parallel	2
Number of HW-interfaces Wireless	No
Number of HW-interfaces USB	No
Number of HW-interfaces other	0 mA
With optical interface	0 - 0 V
Supporting protocol for TCP/IP	AC
Supporting protocol for PROFIBUS	Triac
Supporting protocol for CAN	0.5 A
Supporting protocol for INTERBUS	0 - 251 V
Supporting protocol for ASI	AC
Supporting protocol for KNX	No
Supporting protocol for MODBUS	0
Supporting protocol for Data-Highway	0
Supporting protocol for DeviceNet	0
Supporting protocol for SUCONET	0
Supporting protocol for LON	0
Supporting protocol for PROFINET IO	0
Supporting protocol for PROFINET CBA	0
Supporting protocol for SERCOS	0
Supporting protocol for Foundation Fieldbus	0
Supporting protocol for EtherNet/IP	1
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	Yes
Supporting protocol for PROFIsafe	Yes
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	No
Radio standard Bluetooth	No
Radio standard WLAN 802.11	No
Radio standard GPRS	No
Radio standard GSM	Yes
Radio standard UMTS	No
IO link master	No
System accessory	No
Degree of protection (IP)	No
Type of electric connection	No
Time delay at signal exchange	No
Fieldbus connection over separate bus coupler possible	No
Rail mounting possible	No
Wall mounting/direct mounting	No
Front build in possible	No
Rack-assembly possible	No
Suitable for safety functions	No
Category according to EN 954-1	Yes
SIL according to IEC 61508	No
Performance level acc. EN ISO 13849-1	No
Appendant operation agent (Ex ia)	No
Appendant operation agent (Ex ib)	No
Explosion safety category for gas	No
Explosion safety category for dust	No
Width	Yes
Height	IP20
Depth	Plug-in connection
Product Standards	0 - 11 ms
UL File No.	Yes
UL Category Control No.	Yes
CSA File No.	No
CSA Class No.	No
North America Certification	No
Specially designed for North America	No
Current Limiting Circuit-Breaker	None
Degree of Protection	None
Link to sheet catalogue	None