Ürün Açıklaması

Power supply module XI/ON, 24 V DC
Power supply module, Function: XN Slice module, For use with: XN-P3T-SBB, XN-P3S-SBB, XN-P4T-SBBC, XN-P4S-SBBC, Standards: EN 61000-6-2, EN 61000-6-4, EN 61131-2, Degree of Protection: IP20

Function	XI/ON power supply modules
Function	XN Slice module
Short Description	Field power supply module with 24 V DC nominal voltage
For use with	XN-P3T-SBB XN-P3S-SBB XN-P4T-SBBC XN-P4S-SBBC
Standards
Potential isolation	EN 61000-6-2 EN 61000-6-4 EN 61131-2
Ambient temperature	Yes, through optocoupler
Storage [ϑ]	0 - +55 °C
Relative humidity	-25 - +85 °C
Harmful gases	5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C)
Vibration resistance, operating conditions	SO2: 10 (rel. humidity < 75%, no condensation) H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm
Mechanical shock resistance	according to IEC/EN 60068-2-6
Continuous shock resistance (IEC/EN 60068-2-29)	according to IEC 60068-2-27 g
Drop and topple	According to IEC 60068-2-29
Degree of Protection	According to IEC 60068-2-31, free fall according to IEC 60068-2-32
Electromagnetic compatibility (EMC) >ESD [Air/contact discharge]	IP20
Electromagnetic compatibility (EMC) >Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ]	EN 61000-4-2 kV
Electromagnetic compatibility (EMC) >Burst	EN 61100-4-2 V/m
Electromagnetic compatibility (EMC) >Surge	EN 61100-4-4
Electromagnetic compatibility (EMC) >Radiated RFI	EN 61100-4-5
Electromagnetic compatibility (EMC) >Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)]	EN 61100-4-6 V
Electromagnetic compatibility (EMC) >Voltage fluctuations/voltage dips	EN 55016-2-3 dB
Electromagnetic compatibility (EMC) >Type test	EN 61131-2
Approvals	to EN 61131-2
Other technical data (sheet catalogue)	CE, cULus
Field voltage [UL ]	Technical Data
Admissible range
Rated current consumption from module bus [IMB ]	24 V DC
Rated insulation voltage [Ui]	18-30 V DC
Residual ripple	≦ 28 mA
Maximum operating current [IEI ]	500 V AC
Number of diagnostic bytes	According to EN 61131-2; ripple < 5 %
Base module without gateway power supply >without C connection	10 A
Base module without gateway power supply >with C connection	4
Power loss [P]	2-/3-wire XN-P3x-SBB
Rated operational current for specified heat dissipation [In]	4-wire XN-P4x-SBBC
Heat dissipation per pole, current-dependent [Pvid]	1.3 W
Equipment heat dissipation, current-dependent [Pvid]
Static heat dissipation, non-current-dependent [Pvs]	Permissible range for field voltage UL: As per EN 61131-2 (18 - 30 V DC)
Heat dissipation capacity [Pdiss]
Operating ambient temperature min.	0 A
Operating ambient temperature max.	0 W
Degree of Protection	0 W
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	1.3 W
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	0 W
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	0 °C
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	+55 °C
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	IP20
10.2 Strength of materials and parts >10.2.5 Lifting
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Meets the product standard´s requirements.
10.3 Degree of protection of ASSEMBLIES	Meets the product standard´s requirements.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	Is the panel builder´s responsibility.
10.13 Mechanical function	Is the panel builder´s responsibility.
Supply voltage AC 50 Hz	Is the panel builder´s responsibility.
Supply voltage AC 60 Hz	Is the panel builder´s responsibility.
Supply voltage DC	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Voltage type of supply voltage	Is the panel builder´s responsibility.
Number of HW-interfaces industrial Ethernet	Is the panel builder´s responsibility.
Number of interfaces PROFINET	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Number of HW-interfaces RS-232
Number of HW-interfaces RS-422
Number of HW-interfaces RS-485	0 - 0 V
Number of HW-interfaces serial TTY	0 - 0 V
Number of HW-interfaces parallel	18 - 30 V
Number of HW-interfaces Wireless	DC
Number of HW-interfaces USB	0
Number of HW-interfaces other	0
With optical interface	0
Supporting protocol for TCP/IP	0
Supporting protocol for PROFIBUS	0
Supporting protocol for CAN	0
Supporting protocol for INTERBUS	0
Supporting protocol for ASI	0
Supporting protocol for KNX	0
Supporting protocol for MODBUS	1
Supporting protocol for Data-Highway	No
Supporting protocol for DeviceNet	No
Supporting protocol for SUCONET	No
Supporting protocol for LON	No
Supporting protocol for PROFINET IO	No
Supporting protocol for PROFINET CBA	No
Supporting protocol for SERCOS	No
Supporting protocol for Foundation Fieldbus	No
Supporting protocol for EtherNet/IP	No
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	No
Radio standard Bluetooth	No
Radio standard WLAN 802.11	No
Radio standard GPRS	No
Radio standard GSM	No
Radio standard UMTS	No
System accessory	No
Degree of protection (IP)	No
Type of electric connection	Yes
With potential separation	No
With power supply module	No
Suitable as segment module	No
Remote module	No
Fieldbus connection over separate bus coupler possible	No
Bus diagnosis possible	Yes
Rail mounting possible	IP20
Wall mounting/direct mounting	Screw-/spring clamp connection
Front build in possible	Yes
Rack-assembly possible	No
Suitable for safety functions	Yes
Category according to EN 954-1	No
SIL according to IEC 61508	Yes
Performance level acc. EN ISO 13849-1	Yes
Appendant operation agent (Ex ia)	Yes
Appendant operation agent (Ex ib)	No
Explosion safety category for gas	No
Explosion safety category for dust	No
Width	No
Height
Depth	None
Product Standards	None
UL File No.	No
UL Category Control No.	No
CSA File No.	None
CSA Class No.	None
North America Certification	12.6 mm
Specially designed for North America	74.1 mm
Current Limiting Circuit-Breaker	55.4 mm
Degree of Protection	UL 508; CSA-C22.2 No. 142; IEC/EN 6113-2; CE marking
Link to sheet catalogue	E205091