SKU: Eaton-140066
Analog output module XI/ON, 24 V DC, 2AO (0-10V, +-10V)
The XI/ON standard I/O system offers the right I/O solution for every application due to its great modularity and large variety of functions. Pluggable modules, hot-swapping of modules, wiring on the basic module screw or tension spring, modules´ mechanical coding. The standard gateways support the CANopen bus systems, PROFIBUS-DP deviceNet and Ethernet.
Function | XI/ON I/O modules |
Function | XN Slice module |
Short Description | 2 Analog outputs -10/0 to +10 V DC |
For use with | XN-S3T-SBB XN-S3S-SBB |
Standards | |
Potential isolation | EN 61000-6-2 EN 61000-6-4 EN 61131-2 |
Ambient temperature >Ambient temperature, operation |
Yes, through optocoupler |
Ambient temperature >Storage, transport [ϑ] |
0 - +55 °C |
Relative humidity >Relative humidity |
-25 - +85 °C |
Ambient conditions, mechanical >Degree of Protection |
5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C) |
Ambient conditions, mechanical >Harmful gases |
IP20 |
Vibration resistance, operating conditions | SO2: 10 (rel. humidity < 75%, no condensation) H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm |
Mechanical shock resistance | according to IEC/EN 60068-2-6 |
Continuous shock resistance (IEC/EN 60068-2-29) | according to IEC 60068-2-27 g |
Drop and topple | According to IEC 60068-2-29 |
Electromagnetic compatibility (EMC) >ESD [Air/contact discharge] |
According to IEC 60068-2-31, free fall according to IEC 60068-2-32 |
Electromagnetic compatibility (EMC) >Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ] |
EN 61000-4-2 kV |
Electromagnetic compatibility (EMC) >Burst |
EN 61100-4-2 V/m |
Electromagnetic compatibility (EMC) >Surge |
EN 61100-4-4 |
Electromagnetic compatibility (EMC) >Radiated RFI |
EN 61100-4-5 |
Electromagnetic compatibility (EMC) >Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)] |
EN 61100-4-6 V |
Electromagnetic compatibility (EMC) >Voltage fluctuations/voltage dips |
EN 55016-2-3 dB |
Electromagnetic compatibility (EMC) >Type test |
EN 61131-2 |
Approvals | to EN 61131-2 |
Other technical data (sheet catalogue) | CE, cULus |
Measured variables | Technical Data |
Channels | |
Rated voltage through supply terminal [UL ] | Voltage |
Rated current consumption from supply terminal [IL ] | 2 Number |
Rated current consumption from module bus [IMB ] | 24 V DC |
Heat dissipation | 50 mA |
Offset error | ≦ 43 mA |
Linearity | normally 1 W |
Basic error limit at 23 °C | 0.1 % |
Repetition accuracy (deviation) | 0.1 % |
Temperature coefficient | 0.2 % |
Measured value representation | 0.05 % |
Measured variables | 300 ppm/°C of full scale |
Channels | 16-bit signed integer 12-bit signed integer left-justified 12-bit full range left-justified |
Rated voltage through supply terminal [UL ] | |
Rated current consumption from supply terminal [IL ] | Voltage |
Rated current consumption from module bus [IMB ] | 2 Number |
Heat dissipation | 24 V DC |
Output voltage | 50 mA |
Load resistance >Resistive load |
≦ 43 mA |
Load resistance >Capacitive load |
normally 1 W |
Short-circuit current | -10/0…+10 V DC |
Transfer frequency | > 1000 Ω |
Offset error | >1 µF |
Linearity | 40 mA |
Basic error limit at 23 °C | 100 Hz |
Repetition accuracy (deviation) | 0.1 % |
Output ripple | 0.1 % |
Temperature coefficient | 0.2 % |
Settling time >Resistive load |
0.05 % |
Settling time >Inductive load |
0.02 % |
Settling time >Capacitive load |
300 ppm/°C of full scale |
Interference voltage suppression | 0.1 ms |
Measured value representation | 0.5 ms |
Channels | 0.5 ms |
Rated voltage through supply terminal [UL ] | Common-mode > 90 dB Differential-mode > 70 dB Crosstalk between the channels > -50 dB |
Rated current consumption from the supply terminal (at load current = 0 mA) [IL ] | 16-bit signed integer 12-bit signed integer left-justified 12-bit full range left-justified |
Rated current consumption from module bus [IMB ] | |
Power loss [P] | 2 Number |
Resistive load | 24 V DC |
Channels | 50 mA |
Rated voltage through supply terminal [UL ] | ≦ 43 mA |
Rated current consumption from supply terminal [IL ] | Normally 1 W |
Rated current consumption from module bus [IMB ] | > 1000 Ω |
Heat dissipation | |
Rated voltage through supply terminal [UL ] | 2 Number |
Rated current consumption from supply terminal [IL ] | 24 V DC |
Rated current consumption from module bus [IMB ] | 50 mA |
Power loss [P] | ≦ 43 mA |
Rated voltage through supply terminal [UL ] | normally 1 W |
Rated current consumption from supply terminal [IL ] | |
Rated current consumption from module bus [IMB ] | 24 V DC |
Power loss [P] | 50 mA |
Channels | ≦ 43 mA |
Rated voltage through supply terminal [UL ] | Normally 1 W |
Rated current consumption from supply terminal [IL ] | |
Rated current consumption from module bus [IMB ] | 24 V DC |
Heat dissipation | 50 mA |
Temperature coefficient | ≦ 43 mA |
Number of parameter bits | 1 W |
Rated voltage through supply terminal [UL ] | |
Rated current consumption from supply terminal [IL ] | 2 Number |
Rated current consumption from module bus [IMB ] | 24 V DC |
Power loss [P] | 50 mA |
Number of parameter bytes | ≦ 43 mA |
Rated operational current for specified heat dissipation [In] | normally 1 W |
Heat dissipation per pole, current-dependent [Pvid] | |
Equipment heat dissipation, current-dependent [Pvid] | 300 ppm/°C of full scale |
Static heat dissipation, non-current-dependent [Pvs] | 6 (3 per channel) |
Heat dissipation capacity [Pdiss] | |
Operating ambient temperature min. | 24 V DC |
Operating ambient temperature max. | 50 mA |
Degree of Protection | ≦ 43 mA |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
Normally 1 W |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
6 (3 per channel) |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
|
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
0 A |
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
0 W |
10.2 Strength of materials and parts >10.2.5 Lifting |
0 W |
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
1 W |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
0 W |
10.3 Degree of protection of ASSEMBLIES | 0 °C |
10.4 Clearances and creepage distances | +55 °C |
10.5 Protection against electric shock | IP20 |
10.6 Incorporation of switching devices and components | |
10.7 Internal electrical circuits and connections | Meets the product standard´s requirements. |
10.8 Connections for external conductors | Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
10.10 Temperature rise | Does not apply, since the entire switchgear needs to be evaluated. |
10.11 Short-circuit rating | Does not apply, since the entire switchgear needs to be evaluated. |
10.12 Electromagnetic compatibility | Meets the product standard´s requirements. |
10.13 Mechanical function | Meets the product standard´s requirements. |
Supply voltage AC 50 Hz | Meets the product standard´s requirements. |
Supply voltage AC 60 Hz | Does not apply, since the entire switchgear needs to be evaluated. |
Supply voltage DC | Does not apply, since the entire switchgear needs to be evaluated. |
Voltage type of supply voltage | Is the panel builder´s responsibility. |
Input, current | Is the panel builder´s responsibility. |
Input, voltage | Is the panel builder´s responsibility. |
Input, resistor | Is the panel builder´s responsibility. |
Input, resistance thermometer | Is the panel builder´s responsibility. |
Input, thermocouple | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
Input signal, configurable | Is the panel builder´s responsibility. |
Resolution of the analogue inputs | Is the panel builder´s responsibility. |
Output, current | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Output, voltage | |
Output signal configurable | |
Resolution of the analogue outputs | 0 - 0 V |
Number of analogue inputs | 0 - 0 V |
Number of analogue outputs | 20.4 - 28.8 V |
Analogue inputs configurable | DC |
Analogue outputs configurable | No |
Number of HW-interfaces industrial Ethernet | No |
Number of interfaces PROFINET | No |
Number of HW-interfaces RS-232 | No |
Number of HW-interfaces RS-422 | No |
Number of HW-interfaces RS-485 | No |
Number of HW-interfaces serial TTY | 0 Bit |
Number of HW-interfaces parallel | No |
Number of HW-interfaces Wireless | Yes |
Number of HW-interfaces USB | Yes |
Number of HW-interfaces other | 16 Bit |
Supporting protocol for TCP/IP | 0 |
Supporting protocol for PROFIBUS | 2 |
Supporting protocol for CAN | Yes |
Supporting protocol for INTERBUS | Yes |
Supporting protocol for ASI | 0 |
Supporting protocol for KNX | 0 |
Supporting protocol for MODBUS | 0 |
Supporting protocol for Data-Highway | 0 |
Supporting protocol for DeviceNet | 0 |
Supporting protocol for SUCONET | 0 |
Supporting protocol for LON | 0 |
Supporting protocol for PROFINET IO | 0 |
Supporting protocol for PROFINET CBA | 0 |
Supporting protocol for SERCOS | 1 |
Supporting protocol for Foundation Fieldbus | No |
Supporting protocol for EtherNet/IP | No |
Supporting protocol for AS-Interface Safety at Work | No |
Supporting protocol for DeviceNet Safety | No |
Supporting protocol for INTERBUS-Safety | No |
Supporting protocol for PROFIsafe | No |
Supporting protocol for SafetyBUS p | No |
Supporting protocol for other bus systems | No |
Radio standard Bluetooth | No |
Radio standard WLAN 802.11 | No |
Radio standard GPRS | No |
Radio standard GSM | No |
Radio standard UMTS | No |
IO link master | No |
System accessory | No |
Degree of protection (IP) | No |
Degree of protection (NEMA) | No |
Type of electric connection | No |
Fieldbus connection over separate bus coupler possible | No |
Rail mounting possible | No |
Wall mounting/direct mounting | No |
Front build in possible | No |
Rack-assembly possible | No |
Suitable for safety functions | No |
Category according to EN 954-1 | No |
SIL according to IEC 61508 | No |
Performance level acc. EN ISO 13849-1 | No |
Appendant operation agent (Ex ia) | No |
Appendant operation agent (Ex ib) | Yes |
Explosion safety category for gas | IP20 |
Explosion safety category for dust | |
Width | Screw-/spring clamp connection |
Height | Yes |
Depth | Yes |
Product Standards | No |
UL File No. | No |
UL Category Control No. | No |
CSA File No. | No |
CSA Class No. | |
North America Certification | None |
Specially designed for North America | None |
Current Limiting Circuit-Breaker | No |
Degree of Protection | No |
Link to sheet catalogue | None |