Ürün Açıklaması

Analog input card XI/ON, 24 V DC, 1AI (0-10V, +-10V)
The XI/ON standard I/O system offers the right I/O solution for every application due to its great modularity and large variety of functions. Pluggable modules, hot-swapping of modules, wiring on the basic module screw or tension spring, modules´ mechanical coding. The standard gateways support the CANopen bus systems, PROFIBUS-DP deviceNet and Ethernet.

Function	XI/ON I/O modules
Function	XN Slice module
Short Description	1 Analog input -10/0 to +10 V DC
For use with	XN-S3T-SBB XN-S3S-SBB XN-S4T-SBBS XN-S4S-SBBS
Standards
Potential isolation	EN 61000-6-2 EN 61000-6-4 EN 61131-2
Ambient temperature >Ambient temperature, operation	Yes, through optocoupler
Ambient temperature >Storage, transport [ϑ]	0 - +55 °C
Relative humidity >Relative humidity	-25 - +85 °C
Ambient conditions, mechanical >Degree of Protection	5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C)
Ambient conditions, mechanical >Harmful gases	IP20
Vibration resistance, operating conditions	SO2: 10 (rel. humidity < 75%, no condensation) H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm
Mechanical shock resistance	according to IEC/EN 60068-2-6
Continuous shock resistance (IEC/EN 60068-2-29)	according to IEC 60068-2-27 g
Drop and topple	According to IEC 60068-2-29
Electromagnetic compatibility (EMC) >ESD [Air/contact discharge]	According to IEC 60068-2-31, free fall according to IEC 60068-2-32
Electromagnetic compatibility (EMC) >Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ]	EN 61000-4-2 kV
Electromagnetic compatibility (EMC) >Burst	EN 61100-4-2 V/m
Electromagnetic compatibility (EMC) >Surge	EN 61100-4-4
Electromagnetic compatibility (EMC) >Radiated RFI	EN 61100-4-5
Electromagnetic compatibility (EMC) >Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)]	EN 61100-4-6 V
Electromagnetic compatibility (EMC) >Voltage fluctuations/voltage dips	EN 55016-2-3 dB
Electromagnetic compatibility (EMC) >Type test	EN 61131-2
Approvals	to EN 61131-2
Other technical data (sheet catalogue)	CE, cULus
Measured variables	Technical Data
Channels
Rated voltage through supply terminal [UL ]	Voltage
Rated current consumption from supply terminal [IL ]	1 Number
Rated current consumption from module bus [IMB ]	24 V DC
Heat dissipation	50 mA
Encoder supply	≦ 41 mA
Input voltage	< 1 W
Maximum input voltage	Linked to L+ and L- of the supply; not short-circuit protected
Input impedance	-10/0 to +10 V DC
Limit frequency (-3 db)	35 V continuous V DC
Offset error	≧ 98.5 kΩ
Linearity	200 Hz
Basic error limit at 23 °C	0.1 %
Repetition accuracy (deviation)	0.03 %
Temperature coefficient	0.2 %
Resolution of the A/D converter	0.05 %
Measuring principle	300 ppm/°C of full scale
Measured value representation	14-bit (signed integer)
Diagnostics	Successive approximation
Base modules >without C connection	16-bit signed integer 12-bit signed integer left-justified 12-bit full range left-justified
Base modules >without C connection, for sensor feeding	Yes
Measured variables	2-/3-wire XN-S3x-SBB
Channels	4-wire XN-S4x-SBBS
Rated voltage through supply terminal [UL ]
Rated current consumption from supply terminal [IL ]	Voltage
Rated current consumption from module bus [IMB ]	1 Number
Heat dissipation	24 V DC
Offset error	50 mA
Linearity	≦ 41 mA
Basic error limit at 23 °C	< 1 W
Repetition accuracy (deviation)	0.1 %
Temperature coefficient	0.03 %
Measured value representation	0.2 %
Base modules >without C connection	0.05 %
Channels	300 ppm/°C of full scale
Rated voltage through supply terminal [UL ]	16-bit signed integer 12-bit signed integer left-justified 12-bit full range left-justified
Rated current consumption from the supply terminal (at load current = 0 mA) [IL ]	2-/3-wire XN-S3x-SBB
Rated current consumption from module bus [IMB ]
Diagnostics	1 Number
Channels	24 V DC
Rated voltage through supply terminal [UL ]	50 mA
Rated current consumption from supply terminal [IL ]	≦ 41 mA
Rated current consumption from module bus [IMB ]	Yes
Heat dissipation
Base modules >without C connection	1 Number
Rated voltage through supply terminal [UL ]	24 V DC
Rated current consumption from supply terminal [IL ]	50 mA
Rated current consumption from module bus [IMB ]	≦ 41 mA
Base modules >without C connection	< 1 W
Rated voltage through supply terminal [UL ]	2-/3-wire XN-S3x-SBB
Rated current consumption from supply terminal [IL ]
Rated current consumption from module bus [IMB ]	24 V DC
Channels	50 mA
Rated voltage through supply terminal [UL ]	≦ 41 mA
Rated current consumption from supply terminal [IL ]	2-/3-wire XN-S3x-SBB
Rated current consumption from module bus [IMB ]
Heat dissipation	24 V DC
Temperature coefficient	50 mA
Number of parameter bits	≦ 41 mA
without C connection, for sensor feeding
Rated voltage through supply terminal [UL ]	1 Number
Rated current consumption from supply terminal [IL ]	24 V DC
Rated current consumption from module bus [IMB ]	50 mA
Number of parameter bytes	≦ 41 mA
Base modules >without C connection, for sensor feeding	< 1 W
Rated operational current for specified heat dissipation [In]
Heat dissipation per pole, current-dependent [Pvid]	300 ppm/°C of full scale
Equipment heat dissipation, current-dependent [Pvid]	3-bit
Static heat dissipation, non-current-dependent [Pvs]
Heat dissipation capacity [Pdiss]	4-wire XN-S4x-SBBS
Operating ambient temperature min.
Operating ambient temperature max.	24 V DC
Degree of Protection	50 mA
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	≦ 41 mA
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	3-bit
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	4-wire XN-S4x-SBBS
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	0 A
10.2 Strength of materials and parts >10.2.5 Lifting	0 W
10.2 Strength of materials and parts >10.2.6 Mechanical impact	0 W
10.2 Strength of materials and parts >10.2.7 Inscriptions	1 W
10.3 Degree of protection of ASSEMBLIES	0 W
10.4 Clearances and creepage distances	0 °C
10.5 Protection against electric shock	+55 °C
10.6 Incorporation of switching devices and components	IP20
10.7 Internal electrical circuits and connections
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Meets the product standard´s requirements.
10.10 Temperature rise	Meets the product standard´s requirements.
10.11 Short-circuit rating	Does not apply, since the entire switchgear needs to be evaluated.
10.12 Electromagnetic compatibility	Does not apply, since the entire switchgear needs to be evaluated.
10.13 Mechanical function	Meets the product standard´s requirements.
Supply voltage AC 50 Hz	Meets the product standard´s requirements.
Supply voltage AC 60 Hz	Meets the product standard´s requirements.
Supply voltage DC	Does not apply, since the entire switchgear needs to be evaluated.
Voltage type of supply voltage	Does not apply, since the entire switchgear needs to be evaluated.
Input, current	Is the panel builder´s responsibility.
Input, voltage	Is the panel builder´s responsibility.
Input, resistor	Is the panel builder´s responsibility.
Input, resistance thermometer	Is the panel builder´s responsibility.
Input, thermocouple	Is the panel builder´s responsibility.
Input signal, configurable	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Resolution of the analogue inputs	Is the panel builder´s responsibility.
Output, current	Is the panel builder´s responsibility.
Output, voltage	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Output signal configurable
Resolution of the analogue outputs
Number of analogue inputs	0 - 0 V
Number of analogue outputs	0 - 0 V
Analogue inputs configurable	20.4 - 28.8 V
Analogue outputs configurable	DC
Number of HW-interfaces industrial Ethernet	No
Number of interfaces PROFINET	Yes
Number of HW-interfaces RS-232	No
Number of HW-interfaces RS-422	No
Number of HW-interfaces RS-485	No
Number of HW-interfaces serial TTY	Yes
Number of HW-interfaces parallel	16 Bit
Number of HW-interfaces Wireless	No
Number of HW-interfaces USB	No
Number of HW-interfaces other	No
Supporting protocol for TCP/IP	0 Bit
Supporting protocol for PROFIBUS	1
Supporting protocol for CAN	0
Supporting protocol for INTERBUS	Yes
Supporting protocol for ASI	Yes
Supporting protocol for KNX	0
Supporting protocol for MODBUS	0
Supporting protocol for Data-Highway	0
Supporting protocol for DeviceNet	0
Supporting protocol for SUCONET	0
Supporting protocol for LON	0
Supporting protocol for PROFINET IO	0
Supporting protocol for PROFINET CBA	0
Supporting protocol for SERCOS	0
Supporting protocol for Foundation Fieldbus	1
Supporting protocol for EtherNet/IP	No
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	No
Radio standard Bluetooth	No
Radio standard WLAN 802.11	No
Radio standard GPRS	No
Radio standard GSM	No
Radio standard UMTS	No
IO link master	No
System accessory	No
Degree of protection (IP)	No
Degree of protection (NEMA)	No
Type of electric connection	No
Fieldbus connection over separate bus coupler possible	No
Rail mounting possible	No
Wall mounting/direct mounting	No
Front build in possible	No
Rack-assembly possible	No
Suitable for safety functions	No
Category according to EN 954-1	No
SIL according to IEC 61508	No
Performance level acc. EN ISO 13849-1	No
Appendant operation agent (Ex ia)	No
Appendant operation agent (Ex ib)	No
Explosion safety category for gas	Yes
Explosion safety category for dust	IP20
Width
Height	Screw-/spring clamp connection
Depth	Yes
Product Standards	Yes
UL File No.	No
UL Category Control No.	No
CSA File No.	No
CSA Class No.	No
North America Certification
Specially designed for North America	None
Current Limiting Circuit-Breaker	None
Degree of Protection	No
Link to sheet catalogue	No