SKU: Eaton-140057
Digital input card XI/ON, 24 VDC, 2DI, negative switching
The XI/ON standard I/O system offers the right I/O solution for every application due to its great modularity and large variety of functions. Pluggable modules, hot-swapping of modules, wiring on the basic module screw or tension spring, modules´ mechanical coding. The standard gateways support the CANopen bus systems, PROFIBUS-DP deviceNet and Ethernet.
Function | I/O modules |
Function | Digital input modules |
Short Description | XN Slice module |
For use with | 2 Digital inputs, 24 V DC Negative switching |
Standards | XN-S3T-SBB XN-S3S-SBB XN-S4T-SBBC XN-S4S-SBBC |
Potential isolation | |
Ambient temperature >Ambient temperature, operation |
EN 61000-6-2 EN 61000-6-4 EN 61131-2 |
Ambient temperature >Storage, transport [ϑ] |
Yes, through optocoupler |
Relative humidity >Relative humidity |
0 - +55 °C |
Ambient conditions, mechanical >Degree of Protection |
-25 - +85 °C |
Ambient conditions, mechanical >Harmful gases |
5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C) |
Vibration resistance, operating conditions | IP20 |
Mechanical shock resistance | SO2: 10 (rel. humidity < 75%, no condensation) H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm |
Continuous shock resistance (IEC/EN 60068-2-29) | according to IEC/EN 60068-2-6 |
Drop and topple | according to IEC 60068-2-27 g |
Electromagnetic compatibility (EMC) >ESD [Air/contact discharge] |
According to IEC 60068-2-29 |
Electromagnetic compatibility (EMC) >Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ] |
According to IEC 60068-2-31, free fall according to IEC 60068-2-32 |
Electromagnetic compatibility (EMC) >Burst |
EN 61000-4-2 kV |
Electromagnetic compatibility (EMC) >Surge |
EN 61100-4-2 V/m |
Electromagnetic compatibility (EMC) >Radiated RFI |
EN 61100-4-4 |
Electromagnetic compatibility (EMC) >Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)] |
EN 61100-4-5 |
Electromagnetic compatibility (EMC) >Voltage fluctuations/voltage dips |
EN 61100-4-6 V |
Electromagnetic compatibility (EMC) >Type test |
EN 55016-2-3 dB |
Approvals | EN 61131-2 |
Other technical data (sheet catalogue) | to EN 61131-2 |
Channels | CE, cULus |
Rated voltage through supply terminal [UL ] | Technical Data |
Rated current consumption from supply terminal [IL ] | |
Rated current consumption from module bus [IMB ] | 2 Number |
Heat dissipation | 24 V DC |
Base modules >without C connection |
20 mA |
Channels | ≦ 28 mA |
Rated voltage through supply terminal [UL ] | 0.7 W |
Rated current consumption from supply terminal [IL ] | 2-/3-wire XN-S3x-SBB 2-wire proximity switches (Bero® initiators) can be attached, with a permissible quiescent current up to 1.5 mA. |
Rated current consumption from module bus [IMB ] | |
Heat dissipation | 2 Number |
Base modules >without C connection |
24 V DC |
Channels | 20 mA |
Rated voltage through supply terminal [UL ] | ≦ 28 mA |
Rated current consumption from the supply terminal (at load current = 0 mA) [IL ] | 0.7 W |
Rated current consumption from module bus [IMB ] | 2-/3-wire XN-S3x-SBB 2-wire proximity switches (Bero® initiators) can be attached, with a permissible quiescent current up to 1.5 mA. |
Power loss [P] | |
Base modules >with C connection |
2 Number |
Channels | 24 V DC |
Rated voltage through supply terminal [UL ] | 20 mA |
Rated current consumption from supply terminal [IL ] | ≦ 28 mA |
Rated current consumption from module bus [IMB ] | Normally 1 W |
Rated insulation voltage [Ui] | 4-wire XN-S4x-SBBC |
Heat dissipation | |
Input voltage >Nominal input voltage [Ue] |
2 Number |
Input voltage >Low level [UeL] |
24 V DC |
Input voltage >High level [UeH] |
20 mA |
Input current >Low level⁄active level [IeL] |
≦ 28 mA |
Input current >High level⁄active level [IeH] |
500 V AC |
Input delay >tRising edge |
0.7 W |
Input delay >tFalling edge |
24 V DC V DC |
Base modules >without C connection |
-30 V - (UL - 11 V) V |
Base modules >with C connection |
0 - 5 V V |
Rated voltage through supply terminal [UL ] | 0 mA - 1.7 mA mA |
Rated current consumption from supply terminal [IL ] | 1.8 mA - 10 mA mA |
Rated current consumption from module bus [IMB ] | < 200 µs |
Power loss [P] | < 200 µs |
Base modules >without C connection |
2-/3-wire XN-S3x-SBB 2-wire proximity switches (Bero® initiators) can be attached, with a permissible quiescent current up to 1.5 mA. |
Base modules >with C connection |
4-wire XN-S4x-SBBC |
Rated voltage through supply terminal [UL ] | |
Rated current consumption from supply terminal [IL ] | 24 V DC |
Rated current consumption from module bus [IMB ] | 20 mA |
Power loss [P] | ≦ 28 mA |
Channels | Normally 1 W |
Rated voltage through supply terminal [UL ] | 2-/3-wire XN-S3x-SBB 2-wire proximity switches (Bero® initiators) can be attached, with a permissible quiescent current up to 1.5 mA. |
Rated current consumption from supply terminal [IL ] | 4-wire XN-S4x-SBBC |
Rated current consumption from module bus [IMB ] | |
Heat dissipation | 24 V DC |
Input voltage >Nominal input voltage [Ue] |
20 mA |
Input voltage >Low level [UeL] |
≦ 28 mA |
Input voltage >High level [UeH] |
1 W |
Input current >Low level [IeL] |
|
Input current >High level [IeH] |
2 Number |
Rated voltage through supply terminal [UL ] | 24 V DC |
Rated current consumption from supply terminal [IL ] | 20 mA |
Rated current consumption from module bus [IMB ] | ≦ 28 mA |
Power loss [P] | 0.7 W |
Rated operational current for specified heat dissipation [In] | |
Heat dissipation per pole, current-dependent [Pvid] | 24 V DC V DC |
Equipment heat dissipation, current-dependent [Pvid] | -30 V - (UL - 11 V) V |
Static heat dissipation, non-current-dependent [Pvs] | 0 - 5 V V |
Heat dissipation capacity [Pdiss] | 0 mA - 1.7 mA mA |
Operating ambient temperature min. | 1.8 mA - 10 mA mA |
Operating ambient temperature max. | |
Degree of Protection | 24 V DC |
10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
20 mA |
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
≦ 28 mA |
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
Normally 1 W |
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
|
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
The supply terminal (UL) supplies power for the card´s electronics and for the sensors at the inputs. The total current required for each card is the sum of all partial currents. Part of the XI/ON card’s electronics is supplied with module bus voltage (5 V DC), the other part through the supply terminal (UL). Max. permissible capacity: 141 nF at 79 V AC/50 Hz; 23 nF at 265 V AC/50 Hz |
10.2 Strength of materials and parts >10.2.5 Lifting |
|
10.2 Strength of materials and parts >10.2.6 Mechanical impact |
0 A |
10.2 Strength of materials and parts >10.2.7 Inscriptions |
0 W |
10.3 Degree of protection of ASSEMBLIES | 0 W |
10.4 Clearances and creepage distances | 0.7 W |
10.5 Protection against electric shock | 0 W |
10.6 Incorporation of switching devices and components | 0 °C |
10.7 Internal electrical circuits and connections | +55 °C |
10.8 Connections for external conductors | IP20 |
10.9 Insulation properties >10.9.2 Power-frequency electric strength |
|
10.9 Insulation properties >10.9.3 Impulse withstand voltage |
Meets the product standard´s requirements. |
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
10.10 Temperature rise | Meets the product standard´s requirements. |
10.11 Short-circuit rating | Meets the product standard´s requirements. |
10.12 Electromagnetic compatibility | Meets the product standard´s requirements. |
10.13 Mechanical function | Does not apply, since the entire switchgear needs to be evaluated. |
Supply voltage AC 50 Hz | Does not apply, since the entire switchgear needs to be evaluated. |
Supply voltage AC 60 Hz | Meets the product standard´s requirements. |
Supply voltage DC | Meets the product standard´s requirements. |
Voltage type of supply voltage | Meets the product standard´s requirements. |
Number of digital inputs | Does not apply, since the entire switchgear needs to be evaluated. |
Number of digital outputs | Does not apply, since the entire switchgear needs to be evaluated. |
Digital inputs configurable | Is the panel builder´s responsibility. |
Digital outputs configurable | Is the panel builder´s responsibility. |
Input current at signal 1 | Is the panel builder´s responsibility. |
Permitted voltage at input | Is the panel builder´s responsibility. |
Type of voltage (input voltage) | Is the panel builder´s responsibility. |
Type of digital output | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
Output current | Is the panel builder´s responsibility. |
Permitted voltage at output | Is the panel builder´s responsibility. |
Type of output voltage | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
Short-circuit protection, outputs available | |
Number of HW-interfaces industrial Ethernet | |
Number of interfaces PROFINET | 0 - 0 V |
Number of HW-interfaces RS-232 | 0 - 0 V |
Number of HW-interfaces RS-422 | 18 - 30 V |
Number of HW-interfaces RS-485 | DC |
Number of HW-interfaces serial TTY | 2 |
Number of HW-interfaces parallel | 0 |
Number of HW-interfaces Wireless | No |
Number of HW-interfaces USB | No |
Number of HW-interfaces other | 1.8 mA |
With optical interface | 5 - 30 V |
Supporting protocol for TCP/IP | DC |
Supporting protocol for PROFIBUS | None |
Supporting protocol for CAN | 0 A |
Supporting protocol for INTERBUS | 0 - 0 V |
Supporting protocol for ASI | DC |
Supporting protocol for KNX | No |
Supporting protocol for MODBUS | 0 |
Supporting protocol for Data-Highway | 0 |
Supporting protocol for DeviceNet | 0 |
Supporting protocol for SUCONET | 0 |
Supporting protocol for LON | 0 |
Supporting protocol for PROFINET IO | 0 |
Supporting protocol for PROFINET CBA | 0 |
Supporting protocol for SERCOS | 0 |
Supporting protocol for Foundation Fieldbus | 0 |
Supporting protocol for EtherNet/IP | 1 |
Supporting protocol for AS-Interface Safety at Work | No |
Supporting protocol for DeviceNet Safety | No |
Supporting protocol for INTERBUS-Safety | Yes |
Supporting protocol for PROFIsafe | Yes |
Supporting protocol for SafetyBUS p | No |
Supporting protocol for other bus systems | No |
Radio standard Bluetooth | No |
Radio standard WLAN 802.11 | No |
Radio standard GPRS | No |
Radio standard GSM | Yes |
Radio standard UMTS | No |
IO link master | No |
System accessory | No |
Degree of protection (IP) | No |
Type of electric connection | No |
Time delay at signal exchange | No |
Fieldbus connection over separate bus coupler possible | No |
Rail mounting possible | No |
Wall mounting/direct mounting | No |
Front build in possible | No |
Rack-assembly possible | No |
Suitable for safety functions | No |
Category according to EN 954-1 | Yes |
SIL according to IEC 61508 | No |
Performance level acc. EN ISO 13849-1 | No |
Appendant operation agent (Ex ia) | No |
Appendant operation agent (Ex ib) | No |
Explosion safety category for gas | No |
Explosion safety category for dust | No |
Width | Yes |
Height | IP20 |
Depth | Plug-in connection |
Product Standards | 0 - 0 ms |
UL File No. | Yes |
UL Category Control No. | Yes |
CSA File No. | No |
CSA Class No. | No |
North America Certification | No |
Specially designed for North America | No |
Current Limiting Circuit-Breaker | None |
Degree of Protection | None |
Link to sheet catalogue | None |