SKU: Eaton-140040
Digital input card XION ECO, 24 V DC, 16 DI, pulse-switching
The XI/ON standard I/O system adds cost and space-optimized I/O modules and gateways to the XI/ON I/O system. The ECO modules do not need base modules and are fully compatible with the standard XI/ON system. High channel density (up to 16 DI/DO on 13 mm), push-in spring-cage terminals, 8 or 16 channels per module. The ECO gateways support the CANopen bus systems Profibus DP and Ethernet.
| Function | I/O modules |
| Function | Digital input modules |
| Short Description | XNE Slice module |
| Standards | 16 Digital inputs, 24 V DC Positive switching |
| Potential isolation | |
| Ambient temperature >Ambient temperature, operation |
EN 61000-6-2 EN 61000-6-4 EN 61131-2 |
| Ambient temperature >Storage, transport [ϑ] |
Yes, through optocoupler |
| Relative humidity >Relative humidity |
0 - +55 °C |
| Ambient conditions, mechanical >Degree of Protection |
-25 - +85 °C |
| Ambient conditions, mechanical >Harmful gases |
5 - 95 % (indoor), Level RH-2, no condensation (for storage at 45°C) |
| Vibration resistance, operating conditions | IP20 |
| Mechanical shock resistance | SO2: 10 (rel. humidity < 75%, no condensation) H2S: 1.0 (rel. humidity < 75 %,no condensation) ppm |
| Continuous shock resistance (IEC/EN 60068-2-29) | according to IEC/EN 60068-2-6 |
| Drop and topple | according to IEC 60068-2-27 g |
| Electromagnetic compatibility (EMC) >ESD [Air/contact discharge] |
According to IEC 60068-2-29 |
| Electromagnetic compatibility (EMC) >Electromagnetic fields [(0.08…1) / (1,4…2) / (2…2,7) GHz ] |
According to IEC 60068-2-31, free fall according to IEC 60068-2-32 |
| Electromagnetic compatibility (EMC) >Burst |
EN 61000-4-2 kV |
| Electromagnetic compatibility (EMC) >Surge |
EN 61100-4-2 V/m |
| Electromagnetic compatibility (EMC) >Radiated RFI |
EN 61100-4-4 |
| Electromagnetic compatibility (EMC) >Emitted interference (radiated, high frequency) [(30...230 MHz) / (230...1000 MHz)] |
EN 61100-4-5 |
| Electromagnetic compatibility (EMC) >Voltage fluctuations/voltage dips |
EN 61100-4-6 V |
| Electromagnetic compatibility (EMC) >Type test |
EN 55016-2-3 dB |
| Approvals | EN 61131-2 |
| Other technical data (sheet catalogue) | to EN 61131-2 |
| Rated data | CE, cULus |
| Connection design in TOP direction | Technical Data |
| Stripping length | |
| Clamping range | according to VDE 0611 Part 1/8.92 / IEC/EN 60947-7-1 |
| Connectable conductors >"e" solid H07V-U |
Push-In spring-cage terminals |
| Connectable conductors >"f" flexible H 07V-K |
8 mm |
| Connectable conductors >"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
max. 0.14 - 1.5 mm2 |
| Connectable conductors >"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.25 - 1.5 mm2 |
| Connectable conductors >"e" solid H07V-U |
0.25 - 1.5 mm2 |
| Connectable conductors >"f" flexible H 07V-K |
0.25 - 1.5 mm2 |
| Connectable conductors >"f" with ferrules without plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.25 - 0.75 mm2 |
| Connectable conductors >"f" with ferrules with plastic collar according to DIN 46228-1 (ferrules crimped gas-tight) |
0.25 - 1.5 mm2 |
| Gauge pin IEC/EN 60947-1 | 0.25 - 1.5 mm2 |
| Channels | 0.25 - 1.5 mm2 |
| Rated voltage through supply terminal [UL ] | 0.25 - 0.75 mm2 |
| Rated current consumption from supply terminal [IL ] | A1 |
| Rated current consumption from module bus [IMB ] | |
| Heat dissipation | 16 Number |
| Base modules >without C connection |
24 V DC |
| Channels | 3 mA |
| Rated voltage through supply terminal [UL ] | ≦ 15 mA |
| Rated current consumption from supply terminal [IL ] | < 2.5 W |
| Rated current consumption from module bus [IMB ] | Already built in |
| Heat dissipation | |
| Base modules >without C connection |
16 Number |
| Channels | 24 V DC |
| Rated voltage through supply terminal [UL ] | 3 mA |
| Rated current consumption from the supply terminal (at load current = 0 mA) [IL ] | ≦ 15 mA |
| Rated current consumption from module bus [IMB ] | < 2.5 W |
| Channels | Already built in |
| Rated voltage through supply terminal [UL ] | |
| Rated current consumption from supply terminal [IL ] | 16 Number |
| Rated current consumption from module bus [IMB ] | 24 V DC |
| Rated insulation voltage [Ui] | 3 mA |
| Heat dissipation | ≦ 15 mA |
| Input voltage >Nominal input voltage [Ue] |
|
| Input voltage >Low level [UeL] |
16 Number |
| Input voltage >High level [UeH] |
24 V DC |
| Input current >Low level⁄active level [IeL] |
3 mA |
| Input current >High level⁄active level [IeH] |
≦ 15 mA |
| Input delay >tRising edge |
500 V AC |
| Input delay >tFalling edge |
< 2.5 W |
| Base modules >without C connection |
24 V DC V DC |
| Rated voltage through supply terminal [UL ] | -UL - +5 V V |
| Rated current consumption from supply terminal [IL ] | 11 - 30 V V |
| Rated current consumption from module bus [IMB ] | -1 mA - 1.5 mA mA |
| Base modules >without C connection |
2 mA - 5 mA mA |
| Rated voltage through supply terminal [UL ] | < 150 µs |
| Rated current consumption from supply terminal [IL ] | < 300 µs |
| Rated current consumption from module bus [IMB ] | Already built in |
| Channels | |
| Rated voltage through supply terminal [UL ] | 24 V DC |
| Rated current consumption from supply terminal [IL ] | 3 mA |
| Rated current consumption from module bus [IMB ] | ≦ 15 mA |
| Heat dissipation | Already built in |
| Input voltage >Nominal input voltage [Ue] |
|
| Input voltage >Low level [UeL] |
24 V DC |
| Input voltage >High level [UeH] |
3 mA |
| Input current >Low level [IeL] |
≦ 15 mA |
| Input current >High level [IeH] |
|
| Rated voltage through supply terminal [UL ] | 16 Number |
| Rated current consumption from supply terminal [IL ] | 24 V DC |
| Rated current consumption from module bus [IMB ] | 3 mA |
| Rated operational current for specified heat dissipation [In] | ≦ 15 mA |
| Heat dissipation per pole, current-dependent [Pvid] | < 2.5 W |
| Equipment heat dissipation, current-dependent [Pvid] | |
| Static heat dissipation, non-current-dependent [Pvs] | 24 V DC V DC |
| Heat dissipation capacity [Pdiss] | -UL - +5 V V |
| Operating ambient temperature min. | 11 - 30 V V |
| Operating ambient temperature max. | -1 mA - 1.5 mA mA |
| Degree of Protection | 2 mA - 5 mA mA |
| 10.2 Strength of materials and parts >10.2.2 Corrosion resistance |
|
| 10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures |
24 V DC |
| 10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat |
3 mA |
| 10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects |
≦ 15 mA |
| 10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation |
|
| 10.2 Strength of materials and parts >10.2.5 Lifting |
The supply terminal (UL) supplies power for the card´s electronics and for the sensors at the inputs. The total current required for each card is the sum of all partial currents. Part of the XI/ON card’s electronics is supplied with module bus voltage (5 V DC), the other part through the supply terminal (UL). Max. permissible capacity: 141 nF at 79 V AC/50 Hz; 23 nF at 265 V AC/50 Hz |
| 10.2 Strength of materials and parts >10.2.6 Mechanical impact |
|
| 10.2 Strength of materials and parts >10.2.7 Inscriptions |
0 A |
| 10.3 Degree of protection of ASSEMBLIES | 0 W |
| 10.4 Clearances and creepage distances | 0 W |
| 10.5 Protection against electric shock | 2.5 W |
| 10.6 Incorporation of switching devices and components | 0 W |
| 10.7 Internal electrical circuits and connections | 0 °C |
| 10.8 Connections for external conductors | +55 °C |
| 10.9 Insulation properties >10.9.2 Power-frequency electric strength |
IP20 |
| 10.9 Insulation properties >10.9.3 Impulse withstand voltage |
|
| 10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material |
Meets the product standard´s requirements. |
| 10.10 Temperature rise | Meets the product standard´s requirements. |
| 10.11 Short-circuit rating | Meets the product standard´s requirements. |
| 10.12 Electromagnetic compatibility | Meets the product standard´s requirements. |
| 10.13 Mechanical function | Meets the product standard´s requirements. |
| Supply voltage AC 50 Hz | Does not apply, since the entire switchgear needs to be evaluated. |
| Supply voltage AC 60 Hz | Does not apply, since the entire switchgear needs to be evaluated. |
| Supply voltage DC | Meets the product standard´s requirements. |
| Voltage type of supply voltage | Meets the product standard´s requirements. |
| Number of digital inputs | Meets the product standard´s requirements. |
| Number of digital outputs | Does not apply, since the entire switchgear needs to be evaluated. |
| Digital inputs configurable | Does not apply, since the entire switchgear needs to be evaluated. |
| Digital outputs configurable | Is the panel builder´s responsibility. |
| Input current at signal 1 | Is the panel builder´s responsibility. |
| Permitted voltage at input | Is the panel builder´s responsibility. |
| Type of voltage (input voltage) | Is the panel builder´s responsibility. |
| Type of digital output | Is the panel builder´s responsibility. |
| Output current | The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices. |
| Permitted voltage at output | Is the panel builder´s responsibility. |
| Type of output voltage | Is the panel builder´s responsibility. |
| Short-circuit protection, outputs available | The device meets the requirements, provided the information in the instruction leaflet (IL) is observed. |
| Number of HW-interfaces industrial Ethernet | |
| Number of interfaces PROFINET | |
| Number of HW-interfaces RS-232 | 0 - 0 V |
| Number of HW-interfaces RS-422 | 0 - 0 V |
| Number of HW-interfaces RS-485 | 18 - 30 V |
| Number of HW-interfaces serial TTY | DC |
| Number of HW-interfaces parallel | 16 |
| Number of HW-interfaces Wireless | 0 |
| Number of HW-interfaces USB | No |
| Number of HW-interfaces other | No |
| With optical interface | 2 mA |
| Supporting protocol for TCP/IP | 30 - 30 V |
| Supporting protocol for PROFIBUS | DC |
| Supporting protocol for CAN | None |
| Supporting protocol for INTERBUS | 0 A |
| Supporting protocol for ASI | 0 - 0 V |
| Supporting protocol for KNX | DC |
| Supporting protocol for MODBUS | No |
| Supporting protocol for Data-Highway | 0 |
| Supporting protocol for DeviceNet | 0 |
| Supporting protocol for SUCONET | 0 |
| Supporting protocol for LON | 0 |
| Supporting protocol for PROFINET IO | 0 |
| Supporting protocol for PROFINET CBA | 0 |
| Supporting protocol for SERCOS | 0 |
| Supporting protocol for Foundation Fieldbus | 0 |
| Supporting protocol for EtherNet/IP | 0 |
| Supporting protocol for AS-Interface Safety at Work | 1 |
| Supporting protocol for DeviceNet Safety | No |
| Supporting protocol for INTERBUS-Safety | No |
| Supporting protocol for PROFIsafe | Yes |
| Supporting protocol for SafetyBUS p | Yes |
| Supporting protocol for other bus systems | No |
| Radio standard Bluetooth | No |
| Radio standard WLAN 802.11 | No |
| Radio standard GPRS | No |
| Radio standard GSM | No |
| Radio standard UMTS | No |
| IO link master | No |
| System accessory | No |
| Degree of protection (IP) | No |
| Type of electric connection | No |
| Time delay at signal exchange | No |
| Fieldbus connection over separate bus coupler possible | No |
| Rail mounting possible | No |
| Wall mounting/direct mounting | No |
| Front build in possible | No |
| Rack-assembly possible | No |
| Suitable for safety functions | No |
| Category according to EN 954-1 | No |
| SIL according to IEC 61508 | Yes |
| Performance level acc. EN ISO 13849-1 | No |
| Appendant operation agent (Ex ia) | No |
| Appendant operation agent (Ex ib) | No |
| Explosion safety category for gas | No |
| Explosion safety category for dust | No |
| Width | No |
| Height | Yes |
| Depth | IP20 |
| Product Standards | Screw-/spring clamp connection |
| UL File No. | 0 - 0 ms |
| UL Category Control No. | Yes |
| CSA File No. | Yes |
| CSA Class No. | No |
| North America Certification | No |
| Specially designed for North America | No |
| Current Limiting Circuit-Breaker | No |
| Degree of Protection | None |
| Link to sheet catalogue | None |
Tüm hakları saklıdır. Mnelko Endüstriyel San. ve Tic.Ltd.Şti. 2024