Ürün Açıklaması

Counter module XI/ON ECO, 24 V DC, 2 channels
The XI/ON standard I/O system adds cost and space-optimized I/O modules and gateways to the XI/ON I/O system. The ECO modules do not need base modules and are fully compatible with the standard XI/ON system. High channel density (up to 16 DI/DO on 13 mm), push-in spring-cage terminals, 8 or 16 channels per module. The ECO gateways support the CANopen bus systems Profibus DP and Ethernet.

Function	XI/ON technology modules
Function	XN Slice module
Short Description	2 counter channels and 2 PWM channels Counting modes: infinite, once only or periodic count Frequency, rotational speed or period count Acquisition of signals from rotary encoders (track A/B) Output of a defined digital signal Output of a defined number of pulses
Rated operational current for specified heat dissipation [In]
Heat dissipation per pole, current-dependent [Pvid]	0 A
Equipment heat dissipation, current-dependent [Pvid]	0 W
Static heat dissipation, non-current-dependent [Pvs]	0 W
Heat dissipation capacity [Pdiss]	2 W
Operating ambient temperature min.	0 W
Operating ambient temperature max.	0 °C
Degree of Protection	+55 °C
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	IP20
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.5 Lifting	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.6 Mechanical impact	Meets the product standard´s requirements.
10.2 Strength of materials and parts >10.2.7 Inscriptions	Does not apply, since the entire switchgear needs to be evaluated.
10.3 Degree of protection of ASSEMBLIES	Does not apply, since the entire switchgear needs to be evaluated.
10.4 Clearances and creepage distances	Meets the product standard´s requirements.
10.5 Protection against electric shock	Meets the product standard´s requirements.
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Does not apply, since the entire switchgear needs to be evaluated.
10.8 Connections for external conductors	Does not apply, since the entire switchgear needs to be evaluated.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Is the panel builder´s responsibility.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Is the panel builder´s responsibility.
10.10 Temperature rise	Is the panel builder´s responsibility.
10.11 Short-circuit rating	Is the panel builder´s responsibility.
10.12 Electromagnetic compatibility	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.13 Mechanical function	Is the panel builder´s responsibility.
Supply voltage AC 50 Hz	Is the panel builder´s responsibility.
Supply voltage AC 60 Hz	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Supply voltage DC
Voltage type of supply voltage
Number of functions	0 - 0 V
Number of HW-interfaces industrial Ethernet	0 - 0 V
Number of interfaces PROFINET	11 - 30 V
Number of HW-interfaces RS-232	DC
Number of HW-interfaces RS-422	0
Number of HW-interfaces RS-485	0
Number of HW-interfaces serial TTY	0
Number of HW-interfaces parallel	0
Number of HW-interfaces Wireless	0
Number of HW-interfaces USB	0
Number of HW-interfaces other	0
With optical interface	0
Supporting protocol for TCP/IP	0
Supporting protocol for PROFIBUS	0
Supporting protocol for CAN	1
Supporting protocol for INTERBUS	No
Supporting protocol for ASI	No
Supporting protocol for KNX	Yes
Supporting protocol for MODBUS	Yes
Supporting protocol for Data-Highway	No
Supporting protocol for DeviceNet	No
Supporting protocol for SUCONET	No
Supporting protocol for LON	No
Supporting protocol for PROFINET IO	No
Supporting protocol for PROFINET CBA	Yes
Supporting protocol for SERCOS	No
Supporting protocol for Foundation Fieldbus	No
Supporting protocol for EtherNet/IP	No
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	No
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	No
Radio standard Bluetooth	No
Radio standard WLAN 802.11	No
Radio standard GPRS	No
Radio standard GSM	No
Radio standard UMTS	No
IO link master	No
System accessory	No
Suitable for counting	No
Suitable for weighting	No
Suitable for temperature control	No
Suitable for welding control	Yes
Suitable for pressure control	Yes
Suitable for NC	No
Function electronic positioning available	No
Suitable for CNC	No
Suitable for SSI	No
Suitable for incremental data detection	No
Suitable for detection absolute value	Yes
Flux controller possible	No
Suitable for flux measurement	No
Suitable for path controller	Yes
Suitable for cam controller	Yes
Suitable for flying saw	No
Suitable for multi-axis control	No
Single-axis controller possible	No
Suitable for multi-axis positioning	No
Single-axis positioning possible	No
Function block restart blockage	No
Function block automatic reset	Yes
Contactor control function block	No
Function block emergency stop	Yes
Function block contactless working protection installation	No
Function block affirm pushbutton	No
Function block 2-hand switching	No
Function block operating mode selection	No
Function block access control	No
Degree of protection (IP)	No
Degree of protection (NEMA)	No
Fieldbus connection over separate bus coupler possible	Yes
Frequency measurement	No
Rail mounting possible	IP20
Wall mounting/direct mounting
Front build in possible	Yes
Rack-assembly possible	Yes
Suitable for safety functions	No
Category according to EN 954-1	No
SIL according to IEC 61508	No
Performance level acc. EN ISO 13849-1	No
Appendant operation agent (Ex ia)	No
Appendant operation agent (Ex ib)
Explosion safety category for gas	None
Explosion safety category for dust	None
Width	No
Height	No
Depth	None
Specially designed for North America	None
Current Limiting Circuit-Breaker	13 mm
Degree of Protection	161.5 mm
Link to sheet catalogue	74.5 mm