SKU: Eaton-134785
Proximity switch, capacitive, Sn=35mm, 1N/O, 3L, NPN, 10-30VDC, M34, insulated material, M12
Proximity switch, Product range: E53 Capacitive Series, Capacitive sensors, Connection: 3-wire, Rated switching distance: Sn= 35 mm, Design (outer dimensions): 34 mm, Rated operational voltage: Ue= 10 - 30 V DC, Type of mounting: Non-flush, Switching type: NPN, For connection of:: Plug-in connection M12 x 1, Contacts N/O = Normally open: 1 N/O, Material: Insulated material, Degree of Protection: IP65
Basic function | Capacitive sensors |
Product range | E53 Capacitive Series |
Connection | 3-wire |
Design (outer dimensions) | 34 ⌀ mm |
Rated operational voltage [Ue] | 10 - 30 V DC |
Rated switching distance [Sn ] | 35 mm |
Type of mounting | Non-flush |
Switching type | NPN |
For connection of: | Plug-in connection M12 x 1 |
N/O = Normally open | 1 N/O |
Material | Insulated material |
Degree of Protection | IP65 |
Standards | IEC/EN 60947-5-2-EMC |
Ambient temperature | -25 - +70 |
Mechanical shock resistance | 30 Shock duration 11 ms g |
Degree of Protection | IP65 |
Rated switching distance >Rated switching distance [Sn ] |
35 mm |
Repetition accuracy of Sn | 10 % |
Temperature drift of Sn | 10 % |
Switching hysteresis of Sn | 20 % |
Rated operational voltage [Ue] | 10 - 30 V DC |
Residual ripple of Ue | 10 % |
Maximum load current [Ie ] | < 300 mA |
Operating current in the switched state at 24 V DC [Ib ] | 10 mA |
Voltage drop at Ie [Ud ] | 2 V |
Switching Frequency | 250 Hz |
Residual current through the load in the blocked state at 230 V AC and 24 V DC [Ir ] | 0.1 mA |
Switching state display | Red LED |
Protective functions | Short-circuit protective device Protection against polarity reversal Protection against wire breakage |
Connection | 3-wire |
Contacts >N/O = Normally open |
1 N/O |
Style >Design (outer dimensions) |
34 ⌀ mm |
For connection of: | Plug-in connection M12 x 1 |
Material | Insulated material |
Operating ambient temperature min. | -25 °C |
Operating ambient temperature max. | +70 °C |
Width sensor | 0 mm |
Height of sensor | 0 mm |
Length of sensor | 80 mm |
Diameter sensor | 34 mm |
Mechanical mounting condition for sensor | Not flat |
Switching distance | 35 mm |
Suitable for safety functions | No |
Type of switch function | Normally open contact |
Type of switching output | NPN |
Type of electric connection | Connector M12 |
Number of semiconductor outputs with signalling function | 1 |
Number of contact energized outputs with signalling function | 0 |
Number of protected semiconductor outputs | 0 |
Number of protected contact energized outputs | 0 |
Type of actuation | Other |
Type of interface | None |
Type of interface for safety communication | None |
Construction type housing | Cylinder plain |
Coating housing | Other |
Cascadable | No |
Category according to EN 954-1 | B |
SIL according to IEC 61508 | None |
Performance level acc. EN ISO 13849-1 | None |
Max. output current at protected output | 0 mA |
Supply voltage | 10 - 30 V |
Rated control supply voltage Us at AC 50HZ | 0 - 0 V |
Rated control supply voltage Us at AC 60HZ | 0 - 0 V |
Rated control supply voltage Us at DC | 10 - 30 V |
Voltage type | DC |
Switching frequency | 250 Hz |
With monitoring function downstream switching devices | No |
With status indication | Yes |
Material housing | Plastic |
Compression-resistant | No |
Explosion safety category for gas | None |
Explosion safety category for dust | None |
Product Standards | CE marking |
Max. Voltage Rating | 250 V AC, 30 V DC |
Degree of Protection | IEC: IP65; UL/CSA: NEMA 4, 12, 13 |