Ürün Açıklaması

Modular PLC, 24 V DC, 8DI, 6DO, ethernet, RS232, CAN, 4MB, web Server
Modular programmable controllers XC100 and XC200 offer an outstanding level of scalability. Different CPU performance classes and a wide range of expansion modules (XIOC-Module) are available. The compact modular PLCs XC152 facilitate cost-effective solutions of automation tasks using their computing power, the SmartWire-DT interface as well as a whole range of further interfaces. a particular feature is the ability to integrate the product into modern communication concepts. Data exchange via the Ethernet interface to OPC clients or the integrated WEB servers enables the creation of innovative solutions.

Digital input count	Digital:8; of which usable as interrupt: 6
Quantity of outputs	Transistor: 6
Built-in interfaces	CANopen®/easyNet RS232 Ethernet 100Base-TX/10Base-T USB Host
Instructions	expandable with ￫ expansions XI/OC Only on connection with ￫XI/OC rack
User memory	4 MByte
Cycle time for 1 k of instructions (Bit, Byte)	< 0.025 ms
Application/marker/retain data
Integrated Web server	4 MB/16 KB/32 KB
Information about equipment supplied	yes
Approvals	The following accessory equipment is required: terminal clamps, module rack, battery
Standards	EAC
Ambient temperature
Storage [ϑ]	IEC/EN 61131-2 EN 50178
Mounting position	0 - +55 °C
Relative humidity, non-condensing (IEC/EN 60068-2-30)	-25 - +70 °C
Air pressure (operation)	Horizontal
Vibration resistance	10 - 95 %
Mechanical shock resistance	795 - 1080 hPa
Overvoltage category/pollution degree	10 - 57 Hz ±0.075 mm 57 - 150 Hz ±1.0 g
Degree of Protection	15 Shock duration 11 ms g
Rated impulse withstand voltage [Uimp]	II/2
Emitted interference	IP20
Interference immunity	850 V
Battery (service life)	EN 61000-6-4, Class A
Weight	EN 61000-6-2
Terminations	normally 5 years
Terminal capacities >Screw terminals >Flexible with ferrule	0.23 kg
Terminal capacities >Screw terminals >Solid	Plug-in terminal block
Terminal capacities >Spring-loaded terminals >flexible	0.5 - 1.5 mm2
Terminal capacities >Spring-loaded terminals >Solid	0.5 - 2.5 mm2
Duration of mains dip	0.34 - 1.0 mm2
Repetition rate	0.14 - 1.0 mm2
Input voltage
Admissible range	10 ms
Input rating	1 s
Residual ripple	24 V DC
Maximum power loss [Pv]	20.4 - 28.8 V DC
Note on heat dissipation	max. 33 W
Overvoltage protection	≦ 5 %
Protection against polarity reversal	6 W
Mains filter	Without local I/O
Inrush current	Yes
Signal module output voltage >Rated value	Yes
Signal module output voltage >Output current	Yes
Signal module output voltage >Short-circuit rating	No limitation (limited only by upstream 24 V DC power supply unit) x In
Signal module output voltage >Electrically isolated from the supply voltage	5 V DC
Processor	3.2 A
Program code/program data	Yes
Marker/retentive data	No
Cycle time for 1 k of instructions (Bit, Byte)
Ethernet >Data transfer rate	ARM 532 MHz
Ethernet >Connection type
Ethernet >Potential isolation	4 MB/512 kByte
Serial interface (RS232) without handshake lines >Data transfer rate	16/64 KByte
Serial interface (RS232) without handshake lines >Connection technique	< 0.025 ms
Serial interface (RS232) without handshake lines >Potential isolation
USB interface	10/100 Autodetect MBit/s
CANopen® >Maximum data transfer rate	RJ45
CANopen® >Potential isolation	No
CANopen® >Device profile	max. 115.2 kbit/s
CANopen® >PDO type	RJ45
CANopen® >Connection	No
CANopen® >Bus terminating resistors	2.0
CANopen® >Stations	1 MBit/s
Watchdog	Yes
RTC (real-time clock)	To DS 301 V4
Input voltage	Asyn., cyc., acyc.
Voltage range	Plug-in terminal block
Potential isolation >Power supply against CPU voltage	internal
Potential isolation >Power supply against inputs/outputs	max. 126 Number
Status indication	Yes
Terminations	Yes
Overvoltage protection
Protection against polarity reversal	24 V DC
Input current per channel at nominal voltage	19.2 - 30, note polarity V DC
Power loss per channel	Yes
Voltage level to IEC/EN 61131-2 >Limit value type 1	No
Input delay >Off → On	LED
Input delay >On → Off	Plug-in terminal block
Inputs	Yes
Channels with the same reference potential	Yes
Status indication
Channels	Normally 3.5 mA
Power loss per channel	Normally 85 mW
QX0.0 to QX0.3	Low < 5 V DC, high > 15 V DC
Output delay >Off → On	Normally 0.1 ms
Output delay >On → Off	Normally 0.1 ms
Channels with the same reference potential	8, 2 of which programmable as 50 kHz counters, 2 as interrupt inputs, 1 as incremental input Number
Status indication	8 Qty.
Switching capacity	LED
duty factor
Utilization factor	6 Number
Rated operational current for specified heat dissipation [In]	0.08 W
Heat dissipation per pole, current-dependent [Pvid]	0.5 A
Equipment heat dissipation, current-dependent [Pvid]	Normally 0.1 ms
Static heat dissipation, non-current-dependent [Pvs]	Normally 0.1 ms
Heat dissipation capacity [Pdiss]	6 Qty.
Operating ambient temperature min.	LED
Operating ambient temperature max.	IEC/EN 60947-5-1, utilization category DC-13
10.2 Strength of materials and parts >10.2.2 Corrosion resistance	100 % DF
10.2 Strength of materials and parts >10.2.3.1 Verification of thermal stability of enclosures	1 g
10.2 Strength of materials and parts >10.2.3.2 Verification of resistance of insulating materials to normal heat
10.2 Strength of materials and parts >10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects	0 A
10.2 Strength of materials and parts >10.2.4 Resistance to ultra-violet (UV) radiation	0 W
10.2 Strength of materials and parts >10.2.5 Lifting	0 W
10.2 Strength of materials and parts >10.2.6 Mechanical impact	6 W
10.2 Strength of materials and parts >10.2.7 Inscriptions	0 W
10.3 Degree of protection of ASSEMBLIES	0 °C
10.4 Clearances and creepage distances	+55 °C
10.5 Protection against electric shock
10.6 Incorporation of switching devices and components	Meets the product standard´s requirements.
10.7 Internal electrical circuits and connections	Meets the product standard´s requirements.
10.8 Connections for external conductors	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.2 Power-frequency electric strength	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.3 Impulse withstand voltage	Meets the product standard´s requirements.
10.9 Insulation properties >10.9.4 Testing of enclosures made of insulating material	Does not apply, since the entire switchgear needs to be evaluated.
10.10 Temperature rise	Does not apply, since the entire switchgear needs to be evaluated.
10.11 Short-circuit rating	Meets the product standard´s requirements.
10.12 Electromagnetic compatibility	Meets the product standard´s requirements.
10.13 Mechanical function	Meets the product standard´s requirements.
Supply voltage AC 50 Hz	Does not apply, since the entire switchgear needs to be evaluated.
Supply voltage AC 60 Hz	Does not apply, since the entire switchgear needs to be evaluated.
Supply voltage DC	Is the panel builder´s responsibility.
Voltage type of supply voltage	Is the panel builder´s responsibility.
Number of relay outputs	Is the panel builder´s responsibility.
Max. number of time switches	Is the panel builder´s responsibility.
Model	Is the panel builder´s responsibility.
Processing time (1K, binary operation)	The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
Number of HW-interfaces industrial Ethernet	Is the panel builder´s responsibility.
Number of interfaces PROFINET	Is the panel builder´s responsibility.
Number of HW-interfaces RS-232	The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
Number of HW-interfaces RS-422
Number of HW-interfaces RS-485
Number of HW-interfaces USB	0 - 0 V
Number of HW-interfaces parallel	0 - 0 V
Number of HW-interfaces Wireless	20.4 - 28.8 V
Number of HW-interfaces other	DC
Number of analogue outputs	0
Number of analogue inputs	1000
Number of digital inputs	Modular
Number of digital outputs	0.025 ms
With optical interface	1
Supporting protocol for TCP/IP	0
Supporting protocol for PROFIBUS	1
Supporting protocol for CAN	0
Supporting protocol for INTERBUS	0
Supporting protocol for ASI	1
Supporting protocol for KNX	0
Supporting protocol for MODBUS	0
Supporting protocol for Data-Highway	1
Supporting protocol for DeviceNet	0
Supporting protocol for SUCONET	0
Supporting protocol for LON	8
Supporting protocol for PROFINET IO	6
Supporting protocol for PROFINET CBA	No
Supporting protocol for SERCOS	Yes
Supporting protocol for Foundation Fieldbus	Yes
Supporting protocol for EtherNet/IP	Yes
Supporting protocol for AS-Interface Safety at Work	No
Supporting protocol for DeviceNet Safety	No
Supporting protocol for INTERBUS-Safety	No
Supporting protocol for PROFIsafe	Yes
Supporting protocol for SafetyBUS p	No
Supporting protocol for other bus systems	No
Radio standard Bluetooth	Yes
Radio standard WLAN 802.11	No
Radio standard GPRS	No
Radio standard GSM	No
Radio standard UMTS	No
IO link master	No
System accessory	Yes
Redundancy	No
With display	No
Type of memory	No
Memory size	No
Additional program memory possible	No
Rail mounting possible	Yes
Wall mounting/direct mounting	No
Front build in possible	No
Rack-assembly possible	No
Suitable for safety functions	No
Category according to EN 954-1	No
SIL according to IEC 61508	No
Performance level acc. EN ISO 13849-1	Yes
Appendant operation agent (Ex ia)	No
Appendant operation agent (Ex ib)	No
Explosion safety category for gas	RAM
Explosion safety category for dust	4000 kByte
Width	Yes
Height	Yes
Depth	Yes